Upper: Full grain leather | 7 pair D-ring lace-up | Padded bellows tongue and collar for comfort

Lining: Vamp, quarter and tongue lining consist of Ferrabelle fabric laminated to 3M thinsulate insulation material, guaranteeing warmth down to -25°C (Conforms to SatraTM 436) | Non-woven material in-sock laminated to 3M needle felt thinsulate for maximum thermal insulation | Anti-bacterial Energiser woollen top sock with anti-microbial properties

Midsole: Shank reinforcement for additional arch support

Toe cap: Steel

Sole: Double Density PU/Rubber - outer sole 8mm thick (Cold resistant down to -25°C)

Upper: Full grain leather | 4 pair eyelet lace-up | Spat covering with stainless steel buckles to protect from hot burns / exposure to sparks | Padded collar and ½ padded bellows tongue for comfort

Lining: Needle-fibred vamp lining for excellent perspiration absorbency | Non-woven material in-sock laminated to Kevlar to protect the foot from heat transference through the sole of the boot | Anti-bacterial Energiser woollen top sock with anti-microbial properties

Midsole: Shank reinforcement for additional arch support

Toe cap: Steel

Sole: Double Density PU/Rubber - outer sole 8mm thick (Heat-resistant up to 300°C)

• PVC uppers and waterproof gusset for optimum abrasion resistance
• Waterproof gusset preventing water penetration
• Available with and without a steel toe cap
• PVC / Nitrile sole for durability and protection against fats, oils and chemicals
• The cleated sole design provides slip resistance and maximum soil release
• Nylon liner allows for easy cleaning and quick drying resulting in maximum hygiene
• Optimal toe-spring for walking and kneeling

Optional Extras:

• Contour moulded cushion insole to enhance comfort and reduce fatigue

Upper:

• PVC upper for excellent water resistance and durability
• 5 Pair eyelit lace-up

Sole:

• Nitrile PVC sole for enhanced resistance against acids, oils and chemicals as well as uneven and harsh terrain
• The cleated sole provides SRA slip-resistance rating and maximum soil release

Toe Cap:

• Steel toe cap with impact resistance of 200 joules (EN 12568)

Lining:

• Nylon / Polyester fine knit liner for easy cleaning and quick drying enabling maximum hygiene

Last:

• Designed with optimal toe spring for walking and kneeling

The most affordable, quality safety boot! The FX2 Safety Boot is ISO 20345 and SABS approved, and is a high quality and affordable safety boot which is best described as the best hard working economy boot available. This variant features an anti-penetration steel midsole. 

• ​Highly durable full leather upper
• Lightweight dual density polyurethane sole, extremely slip resistant
• Taibrelle moisture wicking lining
• Nickel-free D-rings

Materials:

• Upper: Quality, Durable Tear-Resistant Split Leather Upper
• Lining: Breathable and Abrasion Resistant Tai-brelle

Eyelet:

• Nickel-free D-Rings

Special Features:

• Anti-penetration
• Steel Mid Sole for anti-penetration protection
• Sole resistant to 90ºC (degrees Celsius)
• Padded Tongue ensures maximum comfort
• Padded Upper Collar ensures increased comfort

Sole:

• Temperature Maximum 90ºC (degrees Celsius)
• Dual Density Poly-Urethane Sole
• Inner Sole - Full Removable Inner Soles
• Mid Sole - Steel Mid-sole (Anti-Penetration)
• Oil and acid resistant Dual Density Polyurethane
• Slip Resistance - Tested to SATRA PM144 1992 and meets these requirements. However, care should always be taken on wet or oily surfaces
• Crack Resistance - Tested to 30,000 flex cycles

Toe Cap:

• Steel Toe Cap - Tested to an impact resistance of 200 Joules

Anti Static Properties:

• Product is anti static. If application is life critical additional consultation with product expert is required. Electrical resistance can be significantly changed by flexing, contamination or moisture. Introduction of additional inner sole reduces static resistance

The benchmark in quality workboots! The Chukka Boot is ISO 20345 and SABS approved, and has a range of high quality features, including premium leather and very comfortable soles, all while setting the standard for true quality safety footwear suitable for those always on the move. 

• Highly durable full leather upper
• Padded Bellows tongue for comfort and protection against sparks and shavings
• Lightweight dual density polyurethane sole
• Ultra-comfortable inner sole
• Maxi-grip outer sole – ensuring high durability and slip resistance
• Taibrelle moisture wicking lining
• Rustproof brass D-rings

Materials:

• Upper: Full Grain High Quality Buffalo Leather - Bartan Print / Hi-Visibility “In the Dark” Safety Strip for added visibility
• Inner Sole: Biagioli IBITECH 252 2mm Foam Insole Board
• Lining: Breathable and Abrasion Resistant Tai-brelle (Equivalent to Cambrelle)

Eyelet:

• Nickel-free D-Rings

Special Features:

• Hi-Viz “In the Dark” Safety Strip for added visibility
• Highly padded bellows tongue for comfort & protection against sparks & shavings

Sole:

• Dual Density Poly Urethane REBEL Sole - Injection moulded
• Temperature Maximum 90ºC (degrees Celsius)
• Oil and acid resistant Dual Density PU
• Slip Resistance - Tested to SATRA PM144 1992 and meets these requirements. However, care should always be taken on wet or oily surfaces
• Crack Resistance - Tested to 30,000 flex cycles

Toe Cap:

• Steel Toe Cap - Tested to an impact resistance of 200 Joules

Anti Static Properties:

• Product is anti static. If application is life critical additional consultation with product expert is required. Electrical resistance can be significantly changed by flexing, contamination or moisture. Introduction of additional inner sole reduces static resistance

A quality chemical, water and heat resistant, anti-penetration workboot. The Chemitrak S3 Boot is ISO 20345 and SABS approved. These specialized workboots have been designed to keep your feet safe in the harshest of conditions. The full grain, high quality S2 (water resistant), black treated waxy cow leather offers high resistance to chemicals, heat, flame, oil and mould.

• Full grain, high quality S2 (water resistant) – black treated waxy cow leather: - high resistance to chemicals, heat, flame, oil and mould
• 100% natural nitrile rubber sole - heat resistant up to 300°C (Degrees Celsius)
• Anti-penetration steel midsole
• Breathable and abrasion resistant blue Taibrella lining
• Wide profile carbon steel toe cap
• Nickel-free D-rings
• Hydroseal waterproof lining

Materials:

• Upper: Full Grain, High Quality S2 Black Waxy Cow Leather: Highly Resistance to Chemicals, Flame, Oil & Mould
• Inner Sole: Biagioli IBITECH 252 2mm Foam Insole Board
• Mid Sole: Anti-penetration steel mid sole
• Lining: Breathable and Abrasion Resistant Tai-brelle (Equivalent to Cambrelle)

Eyelet:

• Nickel-free Eyelet 

Sole:

• 100% Nitrile Rubber Sole – cemented
• Temperature Maximum 300ºC (degrees Celsius)
• Heat and Oil resistant Nitrile Rubber Sole
• Slip Resistance - Tested to SATRA PM144 1992 and meets these requirements
• However, care should always be taken on wet or oily surfaces
• Crack Resistance - Tested to 30,000 flex cycles
• Anti-penetration steel mid sole

Toe Cap:

• Steel Toe Cap - Tested to an impact resistance of 200 Joules

Anti Static Properties:

• Product is anti static. If application is life critical additional consultation with product expert is required. Electrical resistance can be significantly changed by flexing, contamination or moisture. Introduction of additional inner sole reduces static resistance

Chemical Applications:

• Leather coating ensures maximum chemical, flame, mould and water resistance

The S3 Technical Boot is ISO 20345 and SABS approved. These specialized workboots have been designed to keep your feet safe in the harshest of conditions. Features of this technical workboot include a full grain, high quality buffalo leather with S3 water resistant coating, a dual density polyurethane sole with anti-penetration, and the widest carbon steel toe cap.

• Full grain high quality buffalo leather with S3 water resistant coating
• Dual density polyurethane REBEL Safetygear sole with anti-penetration
• Widest carbon steel toe cap
• Breathable and abrasion resistant Taibrelle lining
• Fully padded collar and tongue for additional comfort
• Nickel-free D-rings

Materials:

• Upper: Full Grain High Quality Buffalo Leather c/w with S2 Water Resistant Coating
• Lining: Breathable and Abrasion Resistant Tai-brella (Equivalent to Cambrelle)

Eyelet:

• Nickel-free Eyelets

Special Features:

• Hi-Viz “In the Dark” Safety Strip for added visibility

Sole:

• Dual Density Poly Urethane Sole- injection moulded
• Inner Sole - Biagioli IBITECH 252 2mm Foam Insole Board
• Temperature Maximum 90ºC (degrees Celsius)
• Oil and acid resistant Dual Density PU
• Slip Resistance - Tested to SATRA PM144 1992 and meets these requirements
• However, care should always be taken on wet or oily surfaces
• Crack Resistance - Tested to 30,000 flex cycles
• Steel mid sole for anti-penetration
• S2 Water resistant upper

Toe Cap:

• Steel Toe Cap
• Tested to an impact resistance of 200 Joules

Anti Static Properties:

• Product is anti static. If application is life critical additional consultation with product expert is required. Electrical resistance can be significantly changed by flexing, contamination or moisture. Introduction of additional inner sole reduces static resistance

A quality heat resistant safety boot. The Thermotrak Hi is ISO 20345 and SABS approved. The best shoe suited for high temperature applications, this boot features more ankle protection than the Thermotrak Mid, offers a long life nitrile outsole, a max high temperature application of 300°C (degrees Celsius) and a steel shank for torsional rigidity.

• Hygienic removable cushioned inner sole with anti-microbial properties
• Excellent wearing properties - long life Nitrile outsole
• High temperature application max exposure of 300°C
• Taibrelle moisture wicking lining
• Steel shank for torsional rigidity

Materials:

• Upper: Full Grain High Quality Buffalo Leather
• Lining: Breathable and Abrasion Resistant Tai-brelle (Equivalent to Cambrelle)

Special Features:

• Cemented Sole
• No Laces
• Padded Front Flap ensure maximum protection
• Quick Release Velcro straps on sides of flap
• Padded Upper Collar ensures increased comfort

Sole:

• Nitrile Rubber Heat-Resistant Sole – cemented
• Inner Sole - 2mm Anti-Microbial Foam Insole Board complete with Steel Shank and Padded Comfort Zones
• Temperature Maximum 300ºC (degrees Celsius)
• Oil and acid resistant Nitrile Rubber
• Slip Resistance - Tested to SATRA PM144 1992 and meets these requirements. However, care should always be taken on wet or oily surfaces
• Crack Resistance - Tested to 30,000 flex cycles

Toe Cap:

• Steel Toe Cap - Tested to an impact resistance of 200 Joules

Anti Static Properties:

• Product is anti static. If application is life critical additional consultation with product expert is required. Electrical resistance can be significantly changed by flexing, contamination or moisture. Introduction of additional inner sole reduces static resistance

A quality heat resistant safety boot. The Thermotrak Mid is ISO 20345 and SABS approved. The best shoe suited for high temperature applications, this boot offers a long life nitrile outsole, a max high temperature application of 300°C (degrees Celsius) and a steel shank for torsional rigidity.

• Hygienic removable cushioned inner sole with anti-microbial properties
• Excellent wearing properties long life Nitrile outsole
• High temperature application max exposure of 300°C
• Taibrelle moisture wicking lining
• Steel shank for torsional rigidity
• Quick release Velcro straps

Materials:

• Upper: Full Grain High Quality Buffalo Leather
• Lining: Breathable and Abrasion Resistant Tai-brelle (Equivalent to Cambrelle)

Special Features:

• Cemented Sole
• No Laces
• Padded Front Flap ensure maximum protection
• Quick Release Velcro straps on sides of flap
• Padded Upper Collar ensures increased comfort

Sole:

• Nitrile Rubber Heat-Resistant Sole – cemented
• Inner Sole - 2mm Anti-Microbial Foam Insole Board complete with Steel Shank and Padded Comfort Zones
• Temperature Maximum 300ºC (degrees Celsius)
• Oil and acid resistant Nitrile Rubber
• Slip Resistance - Tested to SATRA PM144 1992 and meets these requirements
• However, care should always be taken on wet or oily surfaces
• Crack Resistance - Tested to 30,000 flex cycles

Toe Cap:

• Steel Toe Cap - Tested to an impact resistance of 200 Joules

Anti Static Properties:

• Product is anti static. If application is life critical additional consultation with product expert is required. Electrical resistance can be significantly changed by flexing, contamination or moisture. Introduction of additional inner sole reduces static resistance

The Crazy Horse is a premium slip-on work boot, offering maximum protection and style with a 200J Steel toe cap, toe bumper for added scuff protection, heat resistance up to 300° Celsius, steel midsole for anti-penetration and a high quality full grain Crazy Horse leather upper (suede finish). The Crazy Horse Boot provides excellent comfort with an ultra-thick memory foam platinum foot bed. The Crazy Horse is available in three distinct colour options – black, brown and tan, and is ISO 20345, SABS and NRCS approved.

Material: Leather

Industry: Agriculture, Engineering, Foundries and Smelters, General Applications, Glass Manufacturing, Hospitality, Refineries, Waste disposal, Welders

Technical Feature: 200J Steel toe, Anti-penetration, Anti-static, Genuine leather, Heat resistant 300°, Oil resistant, Shock absorbent, Slip resistant

Materials:

• Upper: Full Grain Crazy Horse Leather
• Footbed: Extra Thick Anti-Static Footbed with Poron Padding
• Inner sole: Biagioli IBTECH 252 2mm Foam Insole Board
• Lining: Breathable and Abrasion Resistant Tai-brelle (Equivalent to Cambrelle)

Sole:

• Dual Density PU/Rubber Heat-Resistant Sole
• Temperature Maximum 300°C (degrees Celsius)
• Oil and acid resistant PU/Rubber
• Slip Resistance – Tested to SATRA PM144 1992 and meets these requirements
• However, care should always be taken on wet or oily surfaces
• Crack Resistance – Tested to 30.000 flex cycles

Toe Cap:

• Tested to an impact resistance of 200 Joules

Toe Guard:

• TPU Anti-scuff Toe Guard

Anti Static Properties:

• Product is anti static. If application is life critical consultation with product expert is required. Electrical resistance can be significantly changed by flexing, contamination or moisture. Introduction of additional inner sole reduces static resistance

The new REBEL Safetygear Platinum Collection offers you the latest safety innovations in safety footwear products that are also built to look genuinely good and offer extreme comfort. The Havoc boot is ISO 20345 approved. This stylish Workboot offers you an easy slip-on solution with supreme comfort. A high quality, premium leather is used, while safety features include steel toe cap, anti-static, oil resistance and heat resistance

Materials:

• Upper: Full Grain, High Quality Waxy Smooth Leather with PU Collar and TPU Back-Counter Reinforcing
• Footbed: Extra Thick Anti-Static Footbed with Poron Padding
• Lining: Breathable and Abrasion Resistant Tai-brelle (Equivalent to Cambrelle)

Eyelets:

• Hexbuttons with Climbing Hooks

Special Features:

• Sole resistant to 300°C

Sole:

• Dual Density PU/Rubber Heat-Resistant Sole 
• Temperature Maximum 300°C
• Oil and acid resistant PU/Rubber
• Slip Resistant – Tested to SATRA PM144 1992 and meets these requirements. However, care should always be taken on wet or oily surface
• Crack Resistant – Tested to 30,000 felx cycles

Toe Cap:

• Tested to an impact resistance of 200 Joules

Anti Static Properties:

• Product is anti static. If application is life critical additional consultation with product expert is required. Electrical resistance can be significantly changed by flexing, contamination or moisture. Introduction of additional inner sole reduces static resistance