11 Results

Per Page
    • In Stock
    • The most affordable, quality safety boot! The FX2 Safety Boot is ISO 20345 and SABS approved, and is a high quality and affordable safety boot which is best described as the best hard working economy boot available. This variant features an anti-penetration steel midsole. 

      • Highly durable full leather upper
      • Lightweight dual density polyurethane sole, extremely slip resistant
      • Taibrelle moisture wicking lining
      • Nickel-free D-rings
    • Materials:

      • Upper: Quality, Durable Tear-Resistant Split Leather Upper
      • Lining: Breathable and Abrasion Resistant Tai-brelle

      Eyelet:

      • Nickel-free D-Rings

      Special Features:

      • Anti-penetration
      • Steel Mid Sole for anti-penetration protection
      • Sole resistant to 90ºC (degrees Celsius)
      • Padded Tongue ensures maximum comfort
      • Padded Upper Collar ensures increased comfort

      Sole:

      • Temperature Maximum 90ºC (degrees Celsius)
      • Dual Density Poly-Urethane Sole
      • Inner Sole - Full Removable Inner Soles
      • Mid Sole - Steel Mid-sole (Anti-Penetration)
      • Oil and acid resistant Dual Density Polyurethane
      • Slip Resistance - Tested to SATRA PM144 1992 and meets these requirements. However, care should always be taken on wet or oily surfaces
      • Crack Resistance - Tested to 30,000 flex cycles

      Toe Cap:

      • Steel Toe Cap - Tested to an impact resistance of 200 Joules

      Anti Static Properties:

      • Product is anti static. If application is life critical additional consultation with product expert is required. Electrical resistance can be significantly changed by flexing, contamination or moisture. Introduction of additional inner sole reduces static resistance
    • N$839.00
    • Rebel FX2 Safety Boots

    • Code: FX2
    • In Stock
    • A quality chemical, water and heat resistant, anti-penetration workboot. The Chemitrak S3 Boot is ISO 20345 and SABS approved. These specialized workboots have been designed to keep your feet safe in the harshest of conditions. The full grain, high quality S2 (water resistant), black treated waxy cow leather offers high resistance to chemicals, heat, flame, oil and mould.

      • Full grain, high quality S2 (water resistant) – black treated waxy cow leather: - high resistance to chemicals, heat, flame, oil and mould
      • 100% natural nitrile rubber sole - heat resistant up to 300°C (Degrees Celsius)
      • Anti-penetration steel midsole
      • Breathable and abrasion resistant blue Taibrella lining
      • Wide profile carbon steel toe cap
      • Nickel-free D-rings
      • Hydroseal waterproof lining
    • Materials:

      • Upper: Full Grain, High Quality S2 Black Waxy Cow Leather: Highly Resistance to Chemicals, Flame, Oil & Mould
      • Inner Sole: Biagioli IBITECH 252 2mm Foam Insole Board
      • Mid Sole: Anti-penetration steel mid sole
      • Lining: Breathable and Abrasion Resistant Tai-brelle (Equivalent to Cambrelle)

      Eyelet:

      • Nickel-free Eyelet 

      Sole:

      • 100% Nitrile Rubber Sole – cemented
      • Temperature Maximum 300ºC (degrees Celsius)
      • Heat and Oil resistant Nitrile Rubber Sole
      • Slip Resistance - Tested to SATRA PM144 1992 and meets these requirements
      • However, care should always be taken on wet or oily surfaces
      • Crack Resistance - Tested to 30,000 flex cycles
      • Anti-penetration steel mid sole

      Toe Cap:

      • Steel Toe Cap - Tested to an impact resistance of 200 Joules

      Anti Static Properties:

      • Product is anti static. If application is life critical additional consultation with product expert is required. Electrical resistance can be significantly changed by flexing, contamination or moisture. Introduction of additional inner sole reduces static resistance

      Chemical Applications:

      • Leather coating ensures maximum chemical, flame, mould and water resistance

    • N$2,423.00
    • Rebel Chemitrak Boots

    • Code: RE210
    • In Stock
    • The S3 Technical Boot is ISO 20345 and SABS approved. These specialized workboots have been designed to keep your feet safe in the harshest of conditions. Features of this technical workboot include a full grain, high quality buffalo leather with S3 water resistant coating, a dual density polyurethane sole with anti-penetration, and the widest carbon steel toe cap.

      • Full grain high quality buffalo leather with S3 water resistant coating
      • Dual density polyurethane REBEL Safetygear sole with anti-penetration
      • Widest carbon steel toe cap
      • Breathable and abrasion resistant Taibrelle lining
      • Fully padded collar and tongue for additional comfort
      • Nickel-free D-rings
    • Materials:

      • Upper: Full Grain High Quality Buffalo Leather c/w with S2 Water Resistant Coating
      • Lining: Breathable and Abrasion Resistant Tai-brella (Equivalent to Cambrelle)

      Eyelet:

      • Nickel-free Eyelets

      Special Features:

      • Hi-Viz “In the Dark” Safety Strip for added visibility

      Sole:

      • Dual Density Poly Urethane Sole- injection moulded
      • Inner Sole - Biagioli IBITECH 252 2mm Foam Insole Board
      • Temperature Maximum 90ºC (degrees Celsius)
      • Oil and acid resistant Dual Density PU
      • Slip Resistance - Tested to SATRA PM144 1992 and meets these requirements
      • However, care should always be taken on wet or oily surfaces
      • Crack Resistance - Tested to 30,000 flex cycles
      • Steel mid sole for anti-penetration
      • S2 Water resistant upper

      Toe Cap:

      • Steel Toe Cap
      • Tested to an impact resistance of 200 Joules

      Anti Static Properties:

      • Product is anti static. If application is life critical additional consultation with product expert is required. Electrical resistance can be significantly changed by flexing, contamination or moisture. Introduction of additional inner sole reduces static resistance
    • N$1,121.00
    • Rebel S3 Technical Boots

    • Water resistant, anti-penetration safety boot
    • Code: RE608
    • In Stock
    • A quality heat resistant safety boot. The Thermotrak Mid is ISO 20345 and SABS approved. The best shoe suited for high temperature applications, this boot offers a long life nitrile outsole, a max high temperature application of 300°C (degrees Celsius) and a steel shank for torsional rigidity.

      • Hygienic removable cushioned inner sole with anti-microbial properties
      • Excellent wearing properties long life Nitrile outsole
      • High temperature application max exposure of 300°C
      • Taibrelle moisture wicking lining
      • Steel shank for torsional rigidity
      • Quick release Velcro straps
    • Materials:

      • Upper: Full Grain High Quality Buffalo Leather
      • Lining: Breathable and Abrasion Resistant Tai-brelle (Equivalent to Cambrelle)

      Special Features:

      • Cemented Sole
      • No Laces
      • Padded Front Flap ensure maximum protection
      • Quick Release Velcro straps on sides of flap
      • Padded Upper Collar ensures increased comfort

      Sole:

      • Nitrile Rubber Heat-Resistant Sole – cemented
      • Inner Sole - 2mm Anti-Microbial Foam Insole Board complete with Steel Shank and Padded Comfort Zones
      • Temperature Maximum 300ºC (degrees Celsius)
      • Oil and acid resistant Nitrile Rubber
      • Slip Resistance - Tested to SATRA PM144 1992 and meets these requirements
      • However, care should always be taken on wet or oily surfaces
      • Crack Resistance - Tested to 30,000 flex cycles

      Toe Cap:

      • Steel Toe Cap - Tested to an impact resistance of 200 Joules

      Anti Static Properties:

      • Product is anti static. If application is life critical additional consultation with product expert is required. Electrical resistance can be significantly changed by flexing, contamination or moisture. Introduction of additional inner sole reduces static resistance
    • N$966.00
    • Rebel Thermotrak Mid Boots

    • Code: RE6S5065
    • In Stock
    • A quality heat resistant safety boot. The Thermotrak Hi is ISO 20345 and SABS approved. The best shoe suited for high temperature applications, this boot features more ankle protection than the Thermotrak Mid, offers a long life nitrile outsole, a max high temperature application of 300°C (degrees Celsius) and a steel shank for torsional rigidity.

      • Hygienic removable cushioned inner sole with anti-microbial properties
      • Excellent wearing properties - long life Nitrile outsole
      • High temperature application max exposure of 300°C
      • Taibrelle moisture wicking lining
      • Steel shank for torsional rigidity
    • Materials:

      • Upper: Full Grain High Quality Buffalo Leather
      • Lining: Breathable and Abrasion Resistant Tai-brelle (Equivalent to Cambrelle)

      Special Features:

      • Cemented Sole
      • No Laces
      • Padded Front Flap ensure maximum protection
      • Quick Release Velcro straps on sides of flap
      • Padded Upper Collar ensures increased comfort

      Sole:

      • Nitrile Rubber Heat-Resistant Sole – cemented
      • Inner Sole - 2mm Anti-Microbial Foam Insole Board complete with Steel Shank and Padded Comfort Zones
      • Temperature Maximum 300ºC (degrees Celsius)
      • Oil and acid resistant Nitrile Rubber
      • Slip Resistance - Tested to SATRA PM144 1992 and meets these requirements. However, care should always be taken on wet or oily surfaces
      • Crack Resistance - Tested to 30,000 flex cycles

      Toe Cap:

      • Steel Toe Cap - Tested to an impact resistance of 200 Joules

      Anti Static Properties:

      • Product is anti static. If application is life critical additional consultation with product expert is required. Electrical resistance can be significantly changed by flexing, contamination or moisture. Introduction of additional inner sole reduces static resistance
    • N$1,934.00
    • Rebel Thermotrak High Boots

    • Code: RE6S5072
    • In Stock
    • The benchmark in quality workboots! The Chukka Boot is ISO 20345 and SABS approved, and has a range of high quality features, including premium leather and very comfortable soles, all while setting the standard for true quality safety footwear suitable for those always on the move. 

      • Highly durable full leather upper
      • Padded Bellows tongue for comfort and protection against sparks and shavings
      • Lightweight dual density polyurethane sole
      • Ultra-comfortable inner sole
      • Maxi-grip outer sole – ensuring high durability and slip resistance
      • Taibrelle moisture wicking lining
      • Rustproof brass D-rings
    • Materials:

      • Upper: Full Grain High Quality Buffalo Leather - Bartan Print / Hi-Visibility “In the Dark” Safety Strip for added visibility
      • Inner Sole: Biagioli IBITECH 252 2mm Foam Insole Board
      • Lining: Breathable and Abrasion Resistant Tai-brelle (Equivalent to Cambrelle)

      Eyelet:

      • Nickel-free D-Rings

      Special Features:

      • Hi-Viz “In the Dark” Safety Strip for added visibility
      • Highly padded bellows tongue for comfort & protection against sparks & shavings

      Sole:

      • Dual Density Poly Urethane REBEL Sole - Injection moulded
      • Temperature Maximum 90ºC (degrees Celsius)
      • Oil and acid resistant Dual Density PU
      • Slip Resistance - Tested to SATRA PM144 1992 and meets these requirements. However, care should always be taken on wet or oily surfaces
      • Crack Resistance - Tested to 30,000 flex cycles

      Toe Cap:

      • Steel Toe Cap - Tested to an impact resistance of 200 Joules

      Anti Static Properties:

      • Product is anti static. If application is life critical additional consultation with product expert is required. Electrical resistance can be significantly changed by flexing, contamination or moisture. Introduction of additional inner sole reduces static resistance
    • N$1,073.00
    • Rebel Chukka Boots

    • Code: RE811
    • In Stock
      • High quality, full grain cow leather upper
      • Classic styled, formal boot that doesn’t compromise on industrial safety features
      • EN-ISO 20345 approved carbon steel toe cap
      • Lightweight and comfortable dual density polyurethane sole
      • Ultra comfortable REBEL Safetygear footbed inner sole
      • Taibrelle moisture wicking lining
    • Materials:

      • Upper: Bartan Print Leather Upper
      • Lining: Breathable and Abrasion Resistant Tai-brelle

      Eyelet:

      • D-Rings

      Special Features:

      • Padded Tongue ensures maximum comfort
      • Padded Upper Collar ensures increased comfort

      Sole:

      • Sole resistant to 90ºC (degrees Celsius)
      • Dual Density Poly-Urethane Sole
      • Inner Sole - Removable Inner Soles
      • Temperature Maximum 90ºC (degrees Celsius)
      • Oil Resistant Dual Density PU
      • Slip Resistance - Tested to SATRA PM144 1992 and meets these requirements
      • However, care should always be taken on wet or oily surfaces
      • Crack Resistance - Tested to 30,000 flex cycles

      Toe Cap:

      • Wide Profile Carbon Steel Toe-Cap
      • Tested to an impact resistance of 200 Joules

      Anti Static Properties:

      • Product is anti static. If application is life critical additional consultation with product expert is required. Electrical resistance can be significantly changed by flexing, contamination or moisture. Introduction of additional inner sole reduces static resistance
    • N$584.00
    • Rebel Kontrakta Shoes

    • Affordable,General Purpose Workboots
    • Code: RE128S
To top