15 Results

Per Page
    • In Stock
    • Product Capacity: 150kg/h

      Saw Speed: 190r/min

      Motor Power: 800W (1HP)

      Voltage: 110/220 V

      Machine Size: 390*225*415mm

      Carton Size: 455*305*395mm

      N. T: 26KGS

      G. W: 28kgs

      Power: 800W (1HP)

    • N$4,918.00
    • Meat Grinder/Mincer MC12 220V

    • Code: 9109464065
    • In Stock
    • Throat: 254mm

      Cutting capacity: 240mm

      Blade length: 2,085mm

      Table size: 600 x 470mm

      Motor: 550W

      Weight: 55kgs

      Size of saw blade: 2085x15x0.5mm

    • N$8,333.00
    • Meat Saw With Additional Blade

    • Code: 9109464011
    • Out of Stock Online
    • Materials: 201 Stainless steel

      Power: 750 W

      Voltage: 220 V / 50 HZ

      Vacuum pump of capacity: 20 m³ /hr

      Width of heat-seal: 10 mm

      Vacuum: 0.1 mpa

      Machine Size: 540 x 510 x 500 mm

    • N$17,343.00
    • Packing Machine GRT-DZ400/2F

    • Code: 9109464080
    • Out of Stock Online
    • Usage (recommendation): for Orange, Lemon, Pomegranate, and Watermelon

      Material: Cast Iron, Aluminium alloy, Stainless Steel, Rubber Hand

      Machine size: 310 x 210 x 460mm

      Machine Weight:  6.05 kg

      Packing Size: 280 x 190 x 430 mm

    • N$993.00
    • Juicer CJ105 Manual

    • Code: 9109464090
    • In Stock
    • Convenient aerosol application for use on slides, guides, chains, linkages and other hard-to-reach areas. Protection against metal-to-metal contact giving longer machine life and greater productivity. Excellent anti-corrosion and adhesion properties inhibits metal rusting under humid conditions.

      Directions for use: Shake well before use. Spray liberally onto areas to be treated. Wipe away any excess with a cloth. Reapply as required.

      Appearance: Soft, white, tacky grease

      Thickener: Bentonite

      Working Temperature: -20 °C to 160 °C

      Drop Point, °C: No drop point

      Rust Test, D1743: Pass

    • N$146.00
    • FMG-X Food Machinery Grease

    • Code: 9102745045
    • Out of Stock Online
    • Spanjaard FMG-X White Multi-Purpose Grease (Food Grade) is recommended for the general lubrication of equipment in food and beverage processing plants, including bushes, bearings and other machine parts. Although designed for incidental food contact applications, the excellent lubricating properties allow use in a variety of other applications, allowing rationalisation of lubricants. Provides very good water resistance properties which protect equipment against rusting especially in humid seasonally in-operative plants. Anti-wear additives protect against metal-to-metal contact giving longer machine life and greater productivity.

      Directions for use: Apply by hand or grease gun. If replacing a non-bentonite-thickened grease, flush out old grease completely when switching lubricants. This is achieved by frequent re-greasing over a short time span.

       

      NLGI Consistency: 1.5

      Worked Penetration, 25°C, 1/10mm: 285 – 325

      Colour: White

      Thickener: Bentonite

      Working Temperature, °C: -20 °C to 160 °C

      Drop Point, °C: No drop point

      Rust Test, D1743: Pass

      Copper corrosion: 1b

      4-Ball Weld Load (kgf): 500kgf

      Oil Separation (1000C, 30hrs): 3%

    • N$355.00
    • FMG-X Food Machinery Grease

    • Code: 9102745046
    • In Stock
    • Spanjaard FMG-X White Multi-Purpose Grease (Food Grade) is recommended for the general lubrication of equipment in food and beverage processing plants, including bushes, bearings and other machine parts. Although designed for incidental food contact applications, the excellent lubricating properties allow use in a variety of other applications, allowing rationalisation of lubricants. Provides very good water resistance properties which protect equipment against rusting especially in humid seasonally in-operative plants. Anti-wear additives protect against metal-to-metal contact giving longer machine life and greater productivity.

       

      Directions for use: Apply by hand or grease gun. If replacing a non-bentonite-thickened grease, flush out old grease completely when switching lubricants. This is achieved by frequent re-greasing over a short time span.

       

      NLGI Consistency: 1.5

      Worked Penetration, 25°C, 1/10mm: 285 – 325

      Colour: White

      Thickener: Bentonite

      Working Temperature: -20 °C to 160 °C

      Drop Point: No drop point

      Rust Test, D1743: Pass

      Copper corrosion: 1b

      4-Ball Weld Load (kgf): 500kgf

      Oil Separation (1000C, 30hrs): 3%

    • N$407.00
    • FMG-X Food Machinery Grease

    • Code: 9102745047
    • In Stock
    • Excellent assembly lubricant where elastomers and plastic materials move against metal.

      Lubrication of plastic gears, mechanisms, O-rings, gaskets, valves and seals as well as surfaces that require good lubrication properties over extended periods without drying out

      Seals electrical equipment against the ingress of moisture, and protects metal parts against corrosion

      Acts as a release agent in the rubber & plastics industries

      Apply by hand or grease gun

      Consistency – NLGI grade: 2

      Worked Penetration, 25°C , 1/10mm: 275

      Colour: White translucent

      Thickener: Silica

      Drop Point, °C: No Drop Point

      Evaporation Loss 30hrs @ 200°C ,%: 2.0

      Cold Temperature Stability (-50oC): Conforms

      Dynamic Rust Test :<1

      Copper Corrosion – 24hr/100°C: Pass

      Oil Separation 30h @ 200°C ,%: 4.0

      Water Wash Out @ 93°C ,%: 1

      Timken OK Load, kg: 1

      Oxidation Resistance, D942,%>: 1

      Dielectric strength, kV/mm: 15

      Working Temperature, °C: -40 °C to 200 °C

    • N$512.00
    • HTS Silicone Grease Food Grade

    • Code: 9102745054
    • In Stock
    • Long life & high reliability.

      Very solid design for maximum stability.

      Weight anchors for even slipping of clips.

      Easy to play.

      Manual fine adjustment with adjusting screw for optimum pressure adjustment.

      Simplest and less frequent refilling due to extra-long rail rod

      Easy to cleaning

       

      Materials: Stainless steel

      Machine Size: 420 x 160 x 770mm

      Fastener Capacity: 150KG

      Length of the rail: 60 cm

    • N$3,080.00
    • Sausage Clipper GRT-U50

    • Code: 9109464040
    • In Stock
    • Weight anchors for even slipping of clips.

      Manual fine adjustment with adjusting screw for optimum pressure adjustment.

      Simplest and less frequent refilling due to extra-long rail rod

      Material: Stainless Steel

      Size: 420 x 160 x 770 mm

      Fastener Capacity: 150 kg

      Length of rail: 60 cm

    • N$304.00
    • Sausage Clippers U506/Y

    • Code: 9109464045
    • In Stock
    • Plastic bullet foot

      1.2 mm 430 stainless steel top shelf

      Galvanized undershelf and hat channel, Galvanized leg and socket

      Customizable size and material

      610 mm x 1219 mm

    • N$3,792.00
    • Table Work Commercial S/Steel

    • Code: 9109464120
    • In Stock
    • Power: 1500W

      Voltage: 220V/50HZ

      Trays: 20 Trays

      Tray Size: 285 x 385 mm

      Machine size: 420 x 575 x 830 mm

    • N$3,035.00
    • Food Dryer 10 Layer QG-C10

    • Code: 9109464085
To top