• Excellent adhesion properties
• Minimal fling-off when rubber boot is torn
• High shock absorbing lubricant
• Lubrication of universal and constant velocity joints of front wheel drive vehicles and for slow and fast moving plain and anti-friction bearings

Colour: Black.

• 90g tube
• Store under cover with lid/tube closed, away from vibrating floor
• Remove excess from skin and wash with Spanjaard Hand Cleaner followed by soap and water

Chilly Willy is a pre-mixed high performance inorganic coolant /antifreeze package for old and modern vehicles. Made from the finest Euro spec glycols, anti-corrosion and anti-foam agents to provide superior protection.

Freezing Point: -250 C (ASTM D1177)

ASTM D3306/D4985; SAE J-1034; British & Fed. Standards.

Packaging:          1L

                              2L

• Single density PU sole
• Heat resistant up to 95 degrees Celsius
• Standard with a steel toe cap
• Four pair eyelet lace-up
• Leather upper
• Padded collar and tongue for additional comfort
• Standard with a woollen Top Sock for added comfort
• SANS 20345
• Antistatic

Highly concentrated degreasing agent. Suitable for all workshop applications.

• Heavy duty emulsifiable solvent cleaner
• Dissolves oils and greases and emulsifies them so that they can then be rinsed off with water

Appearance: Clear liquid/Red liquid

Dilutents: Paraffin, diesel

• Store under cover/indoors
• Aerosol flammable
• Keep out of direct sunlight
• Do not pierce or burn
• Keep out of reach of children
• Use in well ventilated areas
• Do not expose to temps above
• 50°C. Do not spray on naked flame or incandescent material

Wynn's Radiator Stop Leak is a sealing product to stop small leaks in the cooling system, with anti-corrosive properties.

Packaging:          325ml

• Stops and prevents leakages in the radiator, cooling and heating system.
• Stops head gasket leaks.
• Will not harm rubber hoses, gaskets or other system components.
• Is compatible with all antifreezes and coolants, also with OAT coolants (Organic Acid Technology).
• Is formulated to avoid clogging of radiator waterways and temperature sensors.
• Enhanced protection against rust and corrosion.

Wynn’s Coolant/ Antifreeze is a concentrate designed to meet old and modern vehicle requirements made from the finest Euro spec glycols, anti-corrosion and anti-foam agents to provide superior protection.

• Freezing Point at 40% dilution -25 degrees C (ASTM D1177)
• Wynn’s Coolant/Antifreeze meets ASTM D3306/D4985;
• SAE J-1034; British & Fed. Standards
• Protects cooling system from fouling
• Prevents corrosion
• Anti-foaming agent prevents cavitation and pitting

Applications

• Suitable for all radiator types from classics to modern aluminium core radiators
• The 1 Litre concentrate can be diluted with demineralised water as per vehicle's requirements

Directions

• Dilute contents as desired, then simply pour into the radiator filling reservoir until it is full
• Run the vehicle until normal operating temperature is reached
• Continue to top up while vehicle is idling until the full level is maintained
• It is recommended that all old coolant is flushed using Wynn’s Radiator Flush before replacing with new coolant
• Do not mix with OAT coolant

Packaging

12 x 1 Litre

Wynn's Hydraulic Valve Lifter Concentrate is an oil soluble supplement designed to restore efficient working of hydraulic valve lifters.

Packaging:          PN 76841 – 24x325 ml – NL/FR/DE/IT/DA/NO/HU

PN 76844 – 24x325 ml – EN/ES/RU/SV/FI

• Releases sticking valve stems and hydraulic valve lifter components.
• Quietens valve train noise.
• Dissolves dirt, gum and varnish deposits in the oil channels.
• Contains EP agents for extra protection.
• Does not harm catalytic converters.
• Compatible with all mineral, synthetic, single- and multigrade oils and suitable for regular and low SAPS applications.

Designed to dissolve high temperature petrol deposits on the injector pintle, keeping injectors clean and lubricated. Removes water from the fuel system, restores efficient fuel delivery and is safe to use with all fuel system components including high pressure direct injection, catalytic converters and O2/ lambda sensors.

Packaging:          375ml

• Reduces exhaust smoke caused by incomplete fuel combustion
• Removes injector pintle deposits restoring fuel flow and optimum fuel atomisation
• Improves fuel economy and overall engine performance

<iframe width="560" height="315" src="https://www.youtube.com/embed/9P96_LcfSoQ" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen></iframe>

Promotes complete petrol combustion while cleaning carbon deposits from the upper cylinder preventing preignition and engine run-on. Ideal to use in engines which are not run regularly to avoid fuel deposits and carbon build up caused by contamination and adverse effects of fuel degradation.

Packaging:          125ml

• Supports complete combustion
• Frees sticky piston rings
• Reduces exhaust emissions
• Maintains lambda/O2 sensor and EGR cleanliness
• Inhibits corrosion and improves fuel consumption

A refreshing odour-neutralising foaming cleaner, for auto air conditioning systems. Air conditioner cleaner kills odour-causing bacteria and fungi. Effectively cleans and refreshes. Revitalising “waterfall” fragrance, lasts for up to one week.

A 300ml aerosol is sufficient for one treatment on a standard passenger motor vehicle, but as vehicle makes and models differ, foam may start appearing at the air vents inside the cabin. This indicates that the A/C system is fully saturated and therefore no need to continue spraying. Keep A/C running for at least 5 minutes after application. Switch off engine and replace pollen filter.

Leaves no residue. Will not attack plastics. A most sophisticated cleaner especially developed for the electronics industry. Fast drying.

Electronics: computers, PC boards, relays

Electrical: switches, electro-mechanical devices

Telecom’s: TV, transceivers, connectors

Avionics: radar, navigational equipment

Home: DVD and Blue Ray players, audio equipment, TV sets

Office: Telephone, switchboards, calculators, computer keyboards and cash registers

Colour: Clear

Bulk: Flammable / Store indoors / Keep container closed

Aerosols: Flammable / Do not spray on open flame

• Store under cover/indoors
• Do not puncture or incinerate can even when empty
• Keep out of reach of children
• Do not expose to temp’s above 50°C

Wynn’s Engine Start is the easy solution to starting problems. Avoids wear of the starter motor and prevents battery drain. Engine start assists with cold weather starting, flooded engines and helps restore fuel pump pressure after a vehicle has run dry.

Unlike many starting fluids, Wynn’s Engine Start can be used in 4 stroke and 2 stroke engines as it contains a friction proofing lubricant.

• Fast acting starting solution
• 2 stroke engine safe
• Contains friction proofing
• For petrol or diesel engines

Applications

• Petrol or Diesel engines to promote easy starting
• Vehicles and motor bikes, especially if not in regular use
• Outboard motors and two stoke engines
• Mowers, chain saws, weed eaters etc.

Directions

• Hold can upright              
• Remove air filter for best results              
• Spray into air intake for a few seconds then crank engine            
• Repeat if necessary       

Packaging

12 x 200ml

12 x 375ml

Wynn’s Gear Oil Treatment and Assembly Lube, is a fully supplementary gear oil package scientifically formulated using the latest technology to provide all the below listed gear box, differential and wide variety of automotive and industrial equipment. Formulated to meet international vehicle manufacturer’s specifications of extreme pressure gear oils and recommended for use in limited slip differentials.

Packaging:          90g

• Reduces gear friction & wear extending component life
• Provides oxidation & shear stability for longer oil life
• Quietens diff & manual gearbox whine providing smoother gear changes
• Anti-Wear & Extreme Pressure additives provide excellent protection during engine rebuilds & component assembly

Wynn’s Power Steering & Auto-transmission Conditioner is an oil soluble supplement developed to eliminate PAS (Power assisted Steering) stiffness, shudder and noise as well as ease shifting of automatic gearboxes. Prevents oil leaks by rejuvenating the seals while maintaining optimum performance of the PAS pump and load bearing components. Wynn’s Power Steering & Auto-transmission Conditioner can be added to all conventional ATF and power steering fluid.

Packaging:          375ml

• Eliminates Power Steering stiffness, shudder and noise

• Provides smoother operation of power assisted steering & auto-transmission gear changes
• Prevents ageing and oxidation of automatic transmission and power steering fluids
• Prevents and cures oil leaks by nourishing the rubber/ nitrile seals and O-rings

Wynn’s Throttle Body and Air Intake Cleaner will remove sticky residue, caused by oil mist crankcase fumes, from air intake system components as well as petrol residues, gums and resins. These tar like deposits build up on the idle speed control and butterfly valves leading to irregular airflow and erratic idling. Formulated for modern petrol vehicles, will not remove protective surface coatings and is O2/ Lambda sensor safe

Packaging: 285g

• Removes sticky air intake build up
• Restores correct airflow to improve air/fuel mixture
• Cleans contaminated EGR & idle speed valves
• Restores smooth idling & throttle response

• Dual density PU sole
• Heat resistant up to 95 degrees Celsius
• Standard with a steel toe cap
• Kevlar midsole option available
• Five pair eyelet lace-up
• Leather and synthetic upper
• Padded collar and tongue for extra comfort
• Standard with a woollen Top Sock for added comfort
• SABS Test results pending at time of print
• SANS 20345
• Antistatic

• Dual density PU sole
• Heat resistant up to 95 degrees Celsius
• Available with and without a steel toe cap
• Kevlar midsole option available
• Five pair eyelet lace-up
• Leather upper
• Padded collar and tongue for extra comfort
• Standard with a woollen Top Sock for added comfort
• SANS 20345
• Antistatic

• Dual density PU sole
• Heat resistant up to 95 degrees Celsius
• Standard with steel toe cap
• Kevlar midsole option available
• Seven pair eyelet lace-up
• Leather upper
• Padded collar and tongue for extra comfort
• Standard with a woollen Top Sock for added comfort
• SANS 20345
• Antistatic

A superior blend of polymers & waxes designed to ensure unequalled protection.

Removes oxidation & grime.

• Suitable for all paint finishes
• Removes oxidation and grime
• Restores original paint lustre with ease

Colour: Light blue

• 500ml PVC bottle
• Store under cover
• Keep out of reach of children
• Store indoors

White Lithium-based Grease aerosol lubricant sprays on like a fluid, then congeals to a grease for prolonged lubrication intervals. Effective lubrication and protection for automotive, domestic and light duty applications, including battery terminals, locks, hinges, latches etc.

• Resistant to water
• Prevents corrosion
• Temperature range from -150C to 1200C
• Excellent metal retention