696 Results

Per Page
    • In Stock

    • This is a rope access and rescue harness with specialised features. The
      harness has been engineered for those who need to navigate obstacles while
      ascending or descending from heights; performing a rescue; or working at
      heights in conditions where multiple functionalities are needed.


      The waist D-Ring acts as the main rope anchor point while the chest D-Ring
      performs the function of a back-up rope anchor point or attachment point for
      a vertical or retractable lifeline.


      The dorsal D-ring enables the wearer to select the correct lanyard attachment
      for their work requirement, if needed, and the side D-rings enable the wearer
      to attach a work positioning belt to free up their hands while working at
      heights.


      The waist belt contains two gear loops where the wearer can attach tools,
      freeing up the wearer’s hands and improving safety whilst working at heights.

      Available in 4 sizes, the harness features fully adjustable straps in the back,
      shoulder, waist and leg areas, enabling the wearer to customise the fit for
      enhanced comfort. Comfort is further enhanced through added padding to
      the leg and waist straps enabling pressure to be spread over a larger area.

       

      • 5 attachment points: Front waist, chest & dorsal D-ring with work positioning D-rings & loops
      • Adjustable leg, waist, shoulder and back straps
      • Padding in the leg & waist areas
      • 2 Gear Loops

    • Harness Webbing:
      • 45mm UV-resistant polyester webbing with a min. breaking load of 2,6 tonnes

      Padding:
      • 5mm laminated foam to spread pressure over a larger area

      Buckles:
      • Interlocking, corrosion-resistant steel buckles

      Front Connector:
      • Steel screw gate carabineer with a min. breaking strength of 25kN.

       

    • N$1,149.00

    • Gordian Harness

    • Code: 9114650158
    • In Stock

    • Acid-Resistant and Flame-Retardant Work Jacket
      Stay protected and comfortable on the job with this durable, high-performance Acid-Resistant and Flame-Retardant Work Jacket. Made from DA GAMA SABS-approved D59 100% cotton, this jacket provides superior flame and acid resistance while maintaining breathable comfort for long workdays. Designed with functional storage and reflective safety detailing, it’s ideal for high-risk environments where protection and visibility matter most.

      Features and Benefits
      • Acid-resistant and flame-retardant for maximum protection in hazardous environments
      • 50mm flame-retardant reflective tape enhances visibility and safety
      • Concealed front zip with press stud closure provides secure fastening
      • Zip guard protects against heat conducted through the zipper
      • Chest pocket with press stud and pen division for convenience
      • Two large front pockets for tools and essentials
      • Triple-stitched, reinforced seams for long-lasting durability
      • 2-piece collar with lapel and topstitching for a professional finish
      • Available in multiple colours to suit your workwear requirements

    • • Fabric: DA GAMA SABS Approved D59 100% Cotton
      • Reflective Tape: 50mm Silver Flame-Retardant
      • Pockets: 1 Chest Pocket with Pen Division, 2 Large Front Pockets
      • Closure: Concealed Zip with Press Stud
      • Colours: Navy Blue, Olive Green, Dark Khaki, Royal Blue, Fern Green
      • Protection: Acid-Resistant and Flame-Retardant

    • N$520.00

    • Jonsson Jacket Acid-Flame Resistance

    • Code: CJ59J
    • In Stock
      • 50mm yellow & silver reflective tape for increased visibility
      • Chest pocket with press stud closure and pen pocket
      • Large front pockets
      • Concealed YKK zip
      • Side slits for ease of movement
      • Industrial wash
      • Bar tacks on stress points
      • Triple needle stitching for extra strength

    • Fabric: 100% Cotton Twill

      Weight: 240 gm2

    • N$701.00

    • Jonsson Reflective 100% Cotton Work Jacket

    • Code: CJ87HT
    • In Stock

    • UNIQUELY CASUAL

      Our new everyday hero: The hooded sweatshirt Engelbert Strauss motion ten is light, comfortable and lends the Workwear outfit an individual finish. Because the trendy washed-out look turns every jacket into a unique casual garment. The natural colour range goes perfectly with the motion ten family, thereby offering numerous combination possibilities for every industry.

      Sweat jacket in a modern design

      • A unique look thanks to cool wash effects
      • Good wearing comfort thanks to the light and elastic cotton-stretch material
      • 2 deep side pockets
      • continuous zip
      • hood with drawstring
      • Elastic ribbed collar, cuffs and hem
      • Subtle Strauss logo
      • Upper material: Mixed fabric
      • Pockets / Storage: Slanting pockets
      • Adjustment elements: Elasticated cuffs, Adjustable waistband
      • Hood: Non-removable, Not removable with volume regulation

       

      Material: Shell 95% Cotton / 5% Elastane (approx. 280 g/m²)

      Care instructions: Machine wash 30 °C, Do not bleach, Tumble dry, low temperature, Cold iron, Do Not Dry clean

    • N$1,915.00

    • Engelbert Strauss Jacket Hooded M10

    • Code: ESTRAUSS_HOODEDM10
    • Out of Stock Online
      • Oil and acid resistant sole and upper
      • Complies to SANS 20347
      • UV stabilized PVC to maintain colour durability
      • Virgin PVC, nonslip, hard-wearing sole with strong grip
      • Flexible tread pattern to eliminate surface build up
      • Superior 100% polyester sock lining
      • Moulded wool innersole for comfort

    • Material: Virgin PVC

    • N$

    • Jonsson SABS Approved PVC Clog

    • Code: JGCLOG
    • In Stock

    • Ratelslang Click Belt – Adjustable Nylon Belt (Tan, Coffee, Black, Olive)

      Stay comfortable and secure all day with the Ratelslang Click Belt, designed for quick, precise adjustment in 5mm increments. Perfect for everyday wear, outdoor activities, or work, this durable belt combines strength, versatility, and practicality.

      Features & Benefits:

      • Quick-Release Buckle – High-strength steel buckle ensures a secure fit and allows one-handed adjustment in 5mm increments.

      • 1100D Nylon Construction – Made from robust, wear-resistant material built to withstand tough conditions.

      • Fully Adjustable & Customisable – Easily shorten the belt following the simple step-by-step guide.

      • Versatile Design – Ideal for EDC, outdoor enthusiasts, and everyday work wear.

      • Comfortable & Secure Fit – Ergonomic design ensures all-day comfort without compromising stability.

      What’s in the Box:

      • 1 × Ratelslang Click Belt (Tan, Coffee, Black, or Olive)

      • 1 × Strap Retainer

      • 1 × Torx Adjust Key

       

      How to Adjust to Your Size:

      • Measure: Wrap around your waist and determine the desired length of the belt end.

      • Cut: Trim to size (avoid cutting the track side).

      • Buckle Up: Fit the buckle onto the belt.

      • Screw: Tighten 2 screws through the belt using the included Torx key.

      • Lock: Latch the lever teeth to secure the belt in place.

      • Material: High-strength nylon belt with reinforced steel buckle

      • Belt Width: 3.8 cm (1.49 inches)

      • Buckle Width: 6 cm (2.36 inches)

      • Length: 120–165 cm (cut to size)

      • Colours Available: Tan, Coffee, Black, Olive

    • N$929.00

    • LEM Belt Ratelslang

    • Code: LEM_RATELSLANG
    • In Stock
      • Women’s fit with curved hem
      • Diamond quilted ripstop
      • Fleece collar and pocket lining
      • Corduroy trims
      • Leather badge
      • Front welt pockets, concealed chest pocket and safety pocket

    • Fabric: 100% Polyester Ripstop

      Weight: 280 gm2

    • N$1,048.00

    • Jonsson Women's Quilted Bodywarmer

    • Code: WR022
    • In Stock

    • This is a mining harness with specialised features engineered for those navigating obstacles, below ground, while in a position of fall.

       

      The harness features 3 attachment points; the dorsal D-Ring enables the wearer to select the correct lanyard attachment for their work requirement, whilst the 2 frontal attachment points enable a rescue to be performed without the wearer needing to detach from the anchor point.

       

      Available in 4 sizes, the harness features fully adjustable straps in the shoulder, chest, waist and leg areas, enabling the wearer to customise the fit for enhanced comfort and better focus in even the most hazardous of conditions. Comfort is further enhanced through added padding to the straps between the shoulder blades and waist area enabling pressure to be spread over a larger area.

       

      The harness comes standard with a suspension trauma prevention strap that can be deployed in the event of a fall, providing the wearer with a standing step to maintain healthy blood flow whilst awaiting rescue.

       

      • Rescue pack & battery strap
      • 3 attachment points: Dorsal D-ring & 2 frontal attachment points
      • Adjustable leg, shoulder, chest & waist straps
      • Padded waist & shoulder straps
      • Standing step

    • Harness Webbing:
      • 45mm UV-Resistant polyester webbing with a minimum breaking load of 2,6 tonnes

      Padding:
      • 5mm laminated foam to spread pressure over a larger area

      Buckles:
      • Interlocking, corrosion-resistant steel buckles

       

    • N$1,084.00

    • Excavo Harnes

    • Code: 9114650157
    • In Stock

    • Acid-Resistant and Flame-Retardant Work Trousers
      Built for maximum protection and durability, the Acid-Resistant and Flame-Retardant Work Trousers are engineered for performance in high-risk work environments. Made from DA GAMA SABS-approved D59 100% cotton, these trousers provide exceptional flame and acid resistance while remaining breathable and comfortable throughout the day. Reinforced seams, reflective detailing, and practical pocket placement ensure a secure and functional fit for any demanding task.

      Features and Benefits
      • Acid-resistant and flame-retardant for superior workplace protection
      • 50mm silver flame-retardant reflective tape for enhanced visibility and safety
      • Half-elasticated waistband with belt loops for comfort and flexibility
      • Durable aluminium silver YKK zip with Jonsson-engraved button closure
      • Triple-stitched seams for long-lasting strength and reinforcement at stress points
      • Front slanted pockets and back patch pocket for convenient storage
      • Ruler pocket for easy tool access
      • Clean-finish posted seams and neatly hemmed pocket openings for a professional look
      • Made from premium-quality cotton for breathability and comfort in hot environments

    • • Fabric: DA GAMA SABS Approved D59 100% Cotton
      • Reflective Tape: 50mm Silver Flame-Retardant
      • Waistband: Half-Elasticated with Belt Loops
      • Fly: Aluminium Silver YKK Zip with Jonsson-Engraved Button
      • Pockets: 2 Front Slanted Pockets, 1 Back Patch Pocket, 1 Ruler Pocket
      • Seams: Triple-Needle on Inseam, Side Seams, and Back Rise
      • Protection: Acid-Resistant and Flame-Retardant

    • N$372.00

    • Jonsson Trouser Acid-Flame Resistance

    • Code: CP59P
    • In Stock

    • Kidney Belt – Adjustable Support Belt (Black)

      The Kidney Belt is designed to provide essential lower back and kidney protection in demanding working environments. Ideal for mine workers and industrial applications, this belt offers adjustable support to improve comfort and stability during long shifts and physically intensive tasks.

       

      Features & Benefits

      • Targeted Kidney & Lower Back Support – Helps reduce strain during heavy labour and repetitive movement.

      • Fully Adjustable Fit – Easily adjustable to ensure secure and comfortable wear throughout the day.

      • Durable Construction – Built to withstand tough working conditions in mining and industrial environments.

      • Comfortable Design – Provides firm support without restricting movement.

      • Workplace Ready – Ideal for mine workers, construction workers, and physically demanding jobs.

      • Product Type: Kidney Support Belt

      • Available Sizes: S – 2XL

      • Colour: Black

      • Adjustability: Yes

      • Perfect for mine workers

    • N$323.00

    • Namsafe Kidney Belt

    • Code: ELS_KIDNEY_BELT
    • Out of Stock Online
      • Sturdy material with extra strong triple seams
      • Water-repellent, wind-resistant and breathable thanks to dryplexx® features
      • Interior fully lined with fleece
      • Continuous zip with chin protector
      • 2 side pockets, Napoleon and inner breast pocket with zip
      • Width-adjustable cuffs and elastic inner sleeves
      • Individual click emblem for embroidery with press studs for attachment to the sleeves
      • Upper material: Synthetic
      • Material function: Water-repellent, Wind-repellent, Breathable, Heat insulating
      • Pockets / Storage: Napoleon pocket, Inner pocket, Slanting pockets
      • Adjustment elements: Elasticated cuffs, Internal cuffs, Adjustable waistband
      • Lining / Filling: Fleece
      • Functional layer: Warmth layer, All-weather protective layer
      • Collar: High collar, Chin protection, Fleece inside collar
      • Special features: Triple seams

       

      Material: Shell 100 %Polyester (approx. 285 g/m²)

      Care instructions: Machine wash 40 °C, Do not bleach, Do not tumble dry, Do not iron, Do Not Dry clean

    • N$2,846.00

    • Engelbert Strauss Jacket Shoft Shell Roughtough

    • Code: ESTRAUSS_JSSROUGHTOUGH
    • In Stock
      • Outer shell with bonded fleece in contrast colour
      • Zip guard
      • Side pockets with zip closure
      • Two large inside pockets
      • Shaped panels for feminine fit

    • Fabric: 100% Polyester

      Weight: 315 gm²

    • N$1,279.00

    • Jonsson Women's Softshell Jacket

    • Code: WR025
To top