Upper: Full grain leather | 4 pair eyelet lace-up | Spat covering with stainless steel buckles to protect from hot burns / exposure to sparks | Padded collar and ½ padded bellows tongue for comfort

Lining: Needle-fibred vamp lining for excellent perspiration absorbency | Non-woven material in-sock laminated to Kevlar to protect the foot from heat transference through the sole of the boot | Anti-bacterial Energiser woollen top sock with anti-microbial properties

Midsole: Shank reinforcement for additional arch support

Toe cap: Steel

Sole: Double Density PU/Rubber - outer sole 8mm thick (Heat-resistant up to 300°C)

• PU Injected Molded sole
• Canvas Upper

The Radebe boasts everything that you could possibly want from a mining boot but has several new features that puts it above the rest. Equipped with a TPU sole, it features increased elasticity and improved abrasion resistance for the harshest and most unwelcoming surface conditions, while the addition of a reflective strip adds all-important increased visibility. For so dangerous an occupation as mining only the very best will do, and you don’t get much better than the Radebe.

• Extreme Abrasion Resistance
• Ultra-Slip Resistant
• Increased Resistance to Oil & Grease
• CE EN ISO 20345 Approved
• Reflective Strips
• genuine Split Buffalo Leather Upper
• Lightweight and flexible Dual Density PU/TPU Sole
• Steel Toe Cap with Impact Protection of 200 joules
• Shock Absorbent Heel
• Removable Anti-Static Inner Soles
• Heat Resistant To 90º Celsius
• Wider Cut for Added Comfort
• Stylish Design

• Steel toe cap designed to withstand an impact load of 200 joules
• Buffalo leather for durability
• Oil and acid resistant sole with anti-slip and anti-static properties
• Shank reinforcement for support and stability
• PU/PU sole for comfort, shock absorption and durability
• EVA innersole for comfort and shock absorption

Material: Buffalo Leather

• Steel toe cap designed to withstand an impact load of 200 joules
• Buffalo leather for durability
• Oil and acid resistant sole with anti-slip and anti-static properties
• Shank reinforcement for support and stability
• PU/PU sole for comfort, shock absorption and durability
• EVA innersole for comfort and shock absorption

Material: Buffalo Leather

Combat gear workboots. Our Black Hawk S3 is ISO 20345 and SABS approved. It is a high quality, close quarter combat boot designed for security applications. It features a steel toe cap, anti-penetration steel midsole, water resistance upper, rust proof brass D-rings, and Side YKK zip and laces for secure and speedy fixing and/or removal.

• Steel toe cap
• Anti Penetration steel mid sole
• Water resistant upper construction
• Rust proof brass D rings
• Side Zip for speedy fixing and/or removal
• Side zip for speedy fixing and/or removal
• Laces to ensure correct fitting
• Dual Density PU sole for added comfort and durability
• Taibrelle moisture wicking lining

Materials:

• Upper Water-Resistant Heavy Duty Canvas - complete with Leather Buffers
• Lining Breathable and Abrasion Resistant Tai-brelle (Equivalent to Cambrelle)

Special Features:

• Hi-Leg Lightweight Security Boot
• Heavy Duty Canvas has Water-Resistant coating which allows breathability and quick-drying
• Steel Mid-Sole - essential for broken glass and hypodermic needles
• Leather Buffer over complete toe area offers resistance to scuffing and wear
• Lace Up Front over Padded Tongue
• Quick Release Concealed Zip on side
• Approved YKK zip
• Padded Upper Collar ensures increased comfort
• Dual-density PU Sole ensures maximum comfort and increased durability

Sole:

• Temperature Maximum 90ºC (degrees Celsius)
• Oil and acid resistant Dual Density PU
• Slip Resistance - Tested to Intertek PM144 2004 and meets these requirements. However, care should always be taken on wet or oily surfaces
• Crack Resistance - Tested to 30,000 flex cycles

Toe Cap:

• Steel Toe Cap - Tested to an impact resistance of 200 Joules

Anti Static Properties:

• Product is anti static. If application is life critical additional consultation with product expert is required. Electrical resistance can be significantly changed by flexing, contamination or moisture. Introduction of additional inner sole reduces static resistance

The Chelsea features a steel toe cap, perfect those looking for a stylish and very comfortable workboot. The Chelsea is ISO 20347 approved. Features include 100% metal free design, a full grain leather with “easy-pull-on” tabs, and a wide fitting last, for added comfort. This is the epitome of comfort in a safety shoe!

• ​Smooth finish microfibre upper
• Easy “pull-on” tabs
• Sole resistant to 90ºC (degrees Celsius)
• Steel mid-sole for anti-penetration

Materials:

• Upper: Quality, Durable Tear-Resistant Microfibre Upper with easy “pull-on” tabs
• Inner Sole: Full Removable Inner Soles
• Mid-sole: Steel mid-sole (Anti-Penetration) 

Sole:

• Dual Density Poly-Urethane Sole (Beware of Cheap, Single Density Rip-offs)
• Temperature Maximum 90ºC (degrees Celsius)
• Oil and acid resistant Dual Density PU
• Slip Resistance - Tested to SATRA PM144 1992 and meets these requirements, However, care should always be taken on wet or oily surfaces
• Crack Resistance - Tested to 30,000 flex cycles

Toe Cap:

• Steel Toe-Cap
• Tested to an impact resistance of 200 Joules

Anti Static Properties:

• Product is anti static. If application is life critical additional consultation with product expert is required. Electrical resistance can be significantly changed by flexing, contamination or moisture. Introduction of additional inner sole reduces static resistance

Attractive, soft toe, casual work shoe. The WorkPro is the ideal shoe as casual work footwear, where a clean and uniform look is ideal. The Workpro’s ergonomic design and versatility, as well as its affordable price tag, make this non-safety shoe a certain favourite among hospital, hotel, forecourt, restaurant, retail, cleaning, promotional, event, and front desk staff.

• Water resistant action leather upper
• Exceptionally comfortable
• Breathable and abrasion resistant Taibrelle (equivalent to Cambrelle)
• Lightweight double density PU sole
• Highly durable, slip- and oil-resistant outsole
• Great value for companies looking for a uniform shoe for their staff

Materials:

• Upper: Black, Water Resistant Action Leather Upper
• Lining: Breathable and Abrasion Resistant Tai-brelle (Equivalent to Cambrelle)

Eyelet:

• Black Steel Eyelets

Sole:

• Temperature Maximum 90ºC (degrees Celsius)
• Dual Density Poly Urethane Rebel Sole
• Inner Sole - Biagioli IBITECH 252 2mm Foam Insole Board
• Oil and acid resistant Dual Density PU
• Slip Resistance - Tested to SATRA PM144 1992 and meets these requirements
• However, care should always be taken on wet or oily surfaces
• Crack Resistance - Tested to 30,000 flex cycles

Anti Static Properties:

• Product is NOT anti-static. If application is life critical additional consultation with product expert is required.Electrical resistance can be significantly changed by flexing, contamination or moisture. Introduction of additional inner sole reduces static resistance

• Stylish leather cut from quality buffalo leather
• Leather has been tanned for softer, more comfortable feel while maintaining hard wearing characteristics
• Elastic side gussets give additional support and comfort
• Pull tab is incorporated into the body of the boot to ensure strength and durability
• TPU sole for durability with oil and acid resistance as well as anti-slip and anti-static properties
• Shank reinforcement for support and stability
• Moulded 100% wool innersole for support and comfort

Material: Full Grain Buffalo Leather