• High quality, full grain cow leather upper
• Classic styled, formal boot that doesn’t compromise on industrial safety features
• EN-ISO 20345 approved carbon steel toe cap
• Lightweight and comfortable dual density polyurethane sole
• Ultra comfortable REBEL Safetygear footbed inner sole
• Taibrelle moisture wicking lining

Materials:

• Upper: Bartan Print Leather Upper
• Lining: Breathable and Abrasion Resistant Tai-brelle

Eyelet:

• D-Rings

Special Features:

• Padded Tongue ensures maximum comfort
• Padded Upper Collar ensures increased comfort

Sole:

• Sole resistant to 90ºC (degrees Celsius)
• Dual Density Poly-Urethane Sole
• Inner Sole - Removable Inner Soles
• Temperature Maximum 90ºC (degrees Celsius)
• Oil Resistant Dual Density PU
• Slip Resistance - Tested to SATRA PM144 1992 and meets these requirements
• However, care should always be taken on wet or oily surfaces
• Crack Resistance - Tested to 30,000 flex cycles

Toe Cap:

• Wide Profile Carbon Steel Toe-Cap
• Tested to an impact resistance of 200 Joules

Anti Static Properties:

• Product is anti static. If application is life critical additional consultation with product expert is required. Electrical resistance can be significantly changed by flexing, contamination or moisture. Introduction of additional inner sole reduces static resistance

The new REBEL Safetygear Platinum Collection offers you the latest safety innovations in safety footwear products that are also built to look genuinely good and offer extreme comfort. The Lo-Top shoe is ISO 20345 approved. This stylish safety shoe offers you an easy slip-on solution with supreme comfort. A high quality, premium leather is used, while safety features include steel toe cap, anti-static, oil resistance and heat resistance.

Materials:

• Upper: Quality, Durable Tear-Resistant Microfibre Upper
• Lining: Breathable and Abrasion Resistant Tai-brelle

Eyelet:

• Round Eylets

Special Features:

• Smooth finish microfibre upper
• Sole resistant to 90 °C (degrees Celsius)
• Padded Tongue ensures maximum comfort
• Padded Upper Collar ensures increased comfort

Sole:

• Temperature Maximum 90 °C (degrees Celsius)
• Inner Sole - Full Removable Mesh & EVA Inner Soles
• Dual Density Poly-Urethane Sole
• Oil and acid resistant Dual Density PU
• Slip Resistance – Tested to SATRA PM144 1992 and meets these requirements
• However, care should always be taken on wet or oily surfaces
• Crack Resistance – Tested to 30.000 flex cycles
• Grey & Dark Grey Outer Sole  

Toe Cap:

• Wide Profile Steel Toe-Cap
• Tested to an impact resistance of 200 Joules

Anti-Static Properties:

• Product is anti-static. If application is life critical additional consultation with product expert is required. Electrical resistance can be significantly changed by flexing, contamination or moisture. Introduction of inner sole reduces static resistance

Sports shoe technology in a safety boot. The Enduro-Max is ISO 20345 and SABS approved. This versatile safety shoe offers superb ventilation with a durable mesh and Nubuck leather upper, the moulded TPU sole insert gives torsional rigidity and lateral medial support, while the dual density EVA/Rubber sports shoe outsole offers impeccable comfort and traction.

• Durable Mesh and Nubuck leather upper offering superb ventilation
• Rubber toe-bumper for added scuff protection
• Moulded TPU sole insert for torsional rigidity and lateral medial support
• Dual density EVA/Rubber sports shoe outsole offering superb comfort and traction
• Breathable and abrasion resistant Taibrelle lining

Materials:

• Upper: Durable Mesh and Nubuck leather upper offering superb ventilation / Rubber Toe-Bump for added scuff protection

Sole:

• Temperature Maximum 90ºC (degrees Celsius)
• Oil and acid resistant EVA/Rubber
• Slip Resistance - Tested to SATRA PM144 1992 and meets these requirements. However, care should always be taken on wet or oily surfaces
• Crack Resistance - Tested to 30,000 flex cycles
• Inner Sole - Biagioli IBITECH 252 2mm Foam Insole Board

Toe Cap:

• Wide Profile Esjot Carbon Steel
• Tested to an impact resistance of 200 Joules

Anti Static Properties:

• Product is anti static. If application is life critical additional consultation with product expert is required. Electrical resistance can be significantly changed by flexing, contamination or moisture. Introduction of additional inner sole reduces static resistance

Attractive, soft toe, casual work shoe. The WorkPro is the ideal shoe as casual work footwear, where a clean and uniform look is ideal. The Workpro’s ergonomic design and versatility, as well as its affordable price tag, make this non-safety shoe a certain favourite among hospital, hotel, forecourt, restaurant, retail, cleaning, promotional, event, and front desk staff.

• Water resistant action leather upper
• Exceptionally comfortable
• Breathable and abrasion resistant Taibrelle (equivalent to Cambrelle)
• Lightweight double density PU sole
• Highly durable, slip- and oil-resistant outsole
• Great value for companies looking for a uniform shoe for their staff

Materials:

• Upper: Black, Water Resistant Action Leather Upper
• Lining: Breathable and Abrasion Resistant Tai-brelle (Equivalent to Cambrelle)

Eyelet:

• Black Steel Eyelets

Sole:

• Temperature Maximum 90ºC (degrees Celsius)
• Dual Density Poly Urethane Rebel Sole
• Inner Sole - Biagioli IBITECH 252 2mm Foam Insole Board
• Oil and acid resistant Dual Density PU
• Slip Resistance - Tested to SATRA PM144 1992 and meets these requirements
• However, care should always be taken on wet or oily surfaces
• Crack Resistance - Tested to 30,000 flex cycles

Anti Static Properties:

• Product is NOT anti-static. If application is life critical additional consultation with product expert is required.Electrical resistance can be significantly changed by flexing, contamination or moisture. Introduction of additional inner sole reduces static resistance

Upper:

• Full grain leather
• 3 pair D-ring lace-up with hooks
• Padded tongue and collar for comfort

Lining:

• Needle-fibred vamp lining for excellent perspiration absorbency
• Anti-static non-woven in-sock for comfort and stability
• Anti-bacterial Energiser woollen top sock with anti-microbial properties

Midsole:

• Shank reinforcement for arch support

Toe Cap:

• Steel

Sole:

• Double Density PU/PU (Heat-resistant up to 95°C)

Upper: Full grain leather | 3 pair eyelet lace-up | Padded collar for comfort | Reflective safety tab on rear

Lining: Needle-fibred vamp lining for excellent perspiration absorbency | Anti-static, non-woven in-sock forflexibility, comfort and stability | Anti-bacterial Energiser woollen top sock with anti-microbial properties

Midsole: Shank reinforcement for arch support | Steel midsole available

Toe cap: Steel | Available without toe cap

Sole: Double Density PU/PU (Heat-resistant up to 95°C)

Upper: Full grain leather | 3 pair D-ring lace-up with hooks | Padded bellows tongue and collar for comfort | Extra-wide fitting upper as per podiatry specifications

Lining: Needle-fibred vamp lining for excellent perspiration absorbency | Anti-static, non-woven in-sock with Poron at the ball and heel of the foot for flexibility, comfort and stability | Anti-bacterial Energiser EVA top sock with Poron at the ball and heel of the foot for comfort and anti-fatigue support

Midsole: Engineered with an EVA heel insert for shock absorption | Shank reinforcement for additional arch support | Steel midsole available

Toe cap: Steel - extra-wide fitting

Sole: Double Density PU/PU (Heat-resistant up to 95°C)

• Steel toe cap designed to withstand an impact load of 200 joules
• Buffalo leather for durability
• Oil and acid resistant sole with anti-slip and anti-static properties
• Shank reinforcement for support and stability
• PU/PU sole for comfort, shock absorption and durability
• EVA innersole for comfort and shock absorption

Material: Buffalo Leather

• Accreditation: SANS/ISO 20345
• Heat Resistance: Up to 95°C
• Sole: PU Dual Density
• Upper: Genuine Leather

Upper:

• The upper is cut from 1.8 – 2.0mm Apollo Print Leather, which is strong and has high wearing durability.
• This is an entry level PU Dual Density safety shoe which has a high degree of comfort and durability. Ideal for the construction industry. The low-cut padded collar gives added flexibility and movement as well as good support.
• The vamp lining is made from a special needled Hi-Tech Fibre blend which has excellent perspiration absorbency resulting in a low heat build up and a more comfortable shoe for the wearer. The quarter lining is from an industrial quality “cambrelle” type non-woven material with good abrasion resistance.
• The three pairs of ‘D’ rings are made from steel, which has been treated with a corrosion resistant “gunmetal” coating.
• The lace is braided and made from a polyester yarn with high abrasion resistance together with a central core for additional strength.
• The collar padding material is made from open cell foam for superior comfort and support.

Insole and Insock:

• The insock is from a specially developed antistatic non-woven material which has exceptional directional stability, durability and comfort.

Polyurethane Sole:

• The sole is made from foamed polyester polyurethane, for lightness, comfort and flexibility. The sole has a shore hardness of 0.64 – 0,65 for durability and slip resistance.
• The polyurethane sole is an excellent insulator against the cold and has a heat resistance of up to 95º Celsius.

Toe caps:

• The steel toe cap is imported from China and complies with the SABS specification to withstand an impact load of 200 joules. This toe cap has an extra-wide fit to accommodate the largest variety of feet possible, and we use 5 different sizes to cover the full size range of shoes.

The most affordable, quality safety shoe! The FX2 Safety Shoe is ISO 20345 and SABS approved, and is a high quality and affordable safety shoe which is best described as the best hard working economy shoe available.

• Highly durable full leather upper
• Lightweight dual density polyurethane sole, extremely slip resistant
• Taibrelle moisture wicking lining
• Nickel-free D-rings

Materials:

• Upper: Quality, Durable Tear-Resistant Split Leather Upper
• Lining: Breathable and Abrasion Resistant Tai-brelle

Eyelet:

• Nickel-free D-Rings

Special Features:

• Padded Tongue ensures maximum comfort
• Padded Upper Collar ensures increased comfort

Sole:

• Sole resistant to 90ºC (degrees Celsius)
• Inner Sole - Full Removable Inner Soles
• Dual Density Poly-Urethane SoleTemperature Maximum 90ºC (degrees Celsius)
• Oil and acid resistant Dual Density PU
• Slip Resistance
• However, care should always be taken on wet or oily surfaces
• Crack Resistance - Tested to 30,000 flex cycles

Toe Cap:

• Steel Toe Cap - Tested to an impact resistance of 200 Joules

Anti Static Properties:

• Product is anti static. If application is life critical additional consultation with product expert is required. Electrical resistance can be significantly changed by flexing, contamination or moisture. Introduction of additional inner sole reduces static resistance

Sports shoe technology in a safety boot. The Velocity Shoe is ISO 20345 and SABS approved. This versatile safety shoe offers superior ventilation and durability, a technically advanced, lightweight dual density polyurethane sole, and the Maxi-grip outer sole offers ideal slip resistance.

• High quality breathable upper combining super ventilation and durability.
• Hi-viz reflective strip for added visibility.
• Rubber Toe-Bump for added scuff protection.
• "Easy-On" heel pull-tag.
• Technically advanced, lightweight PU/Rubber sole.
• Maxi-grip outer sole - ensuring high durability and slip resistance

Materials:

• Upper: High quality breathable upper combining super ventilation and durability, with hi-Visibility “In the Dark” safety strip for added visibility. Rubber Toe-Bump for added scuff protection
• Lining: Breathable and Abrasion Resistant Tai-brelle (equivalent to Cambrelle) “Easy-On” Heel Pull-Tag

Eyelet: 

• Woven Fabric Loops and Nickel-free D-Rings

Sole:

• Technically Advanced, Light weight dual density Polyurethane/Rubber
• Maxi-grip outer sole - ensuring high durability and slip resistance
• Temperature Maximum 300ºC (degrees Celsius)
• Oil and acid resistant PU/Rubber
• Slip Resistance - Tested to SATRA PM144 1992 and meets these requirements
• However, care should always be taken on wet or oily surfaces
• Crack Resistance - Tested to 30,000 flex cycles

Toe Cap:

• Steel Toe Cap - Tested to an impact resistance of 200 Joules

Anti Static Properties:

• Product is anti static. If application is life critical additional consultation with product expert is required.Electrical resistance can be significantly changed by flexing, contamination or moisture. Introduction of additional inner sole reduces static resistance