• Precision machined alloy body with control knob for 100% reliability
• Tap allows for partial filling and tops ups
• Compact and simple to use
• Fits Presta valves
• Available as kit or adaptor head only

Is this suitable for my bike?
So long as your crank spindle is 21mm or wider and is steel, then yes!
 

But is it safely secured?
Most certainly, there are 7 high powered neodymium magnets keeping the tool locked into your crank spindle.  The tool has been tested around the world through the Enduro World Series, with no reported failures.

How much does it weigh though?
Without bits, the tool itself is 80g.  With bits installed, it can come up to a 115g total.  Bear in mind that this weight, whilst minimal, is as low as it can go in your bike, which only aids in cornering prowess and overall bike handling.

Every tool you need to fix your bike on the trail, all sneakily hidden in plain sight!

100% designed and handcrafted in Italy, the All In Multitool features 6 customisable tool bit slots, plus storage for a quick link for your chain.  It is locked in place within the hollow of your crank arms with 7 high resistance neodymium magnets.  You'll never leave your multitool at home again.

The tool comes stock with a 3mm, 4mm, 5mm, and 6mm Allen key bits, a t25 torx head, and a #1 Phillips head screwdriver.  

If you find these bits aren't to your liking, then fear not!  Each piece is replaceable from your local hardware store, and you can fully customise which 6 tool bits you'd like to have.

• No splatter
• Improves gear shift
• Reduces friction
• Penetrates and protects chains
• Suitable for mountain and road bikes
• For all weather and riding conditions
• Wax based, solvent free, non flammable 
• 100% biodegradable

Tubeless tyre technology is arguably one of the most significant improvements to mountain biking over the past years. Although this technology is a massive improvement there is a good chance you have had a ride ruined by a tubeless tyre failure and not having the right tools on hand to fix it. For this reason we developed the Shred Zeppelin all-in-one tubeless repair tool.

Tubeless repair solutions in the past have been somewhat unrefined and required many separate parts to create a complete kit. Our goal was to design an all-in-one solution that would integrate all the required tools and could also be attached to the bike. The Shred Zeppelin has the same silhouette as a CO2 canister and is compatible with CO2 brackets and includes a tubeless plug applicator, tubeless plug storage, CO2 regulator and a valve core remover.

• Material: CNC 6061 Alloy
• Weight: 47g with plugs
• Functions: Tubeless Plug Applicator, Tubeless Plug Storage (Includes Plugs), CO2 Regulator, Valve Core Remover

Aluminium barrel

Integrated pressurisable chamber which instantly releases air at the flick of a switch

Ideal for tubeless tyre inflation

Clever valve system (for Presta & Schrader)

Large top mounted pressure gauge.

Steel foot base with nonslip pad

Max pressure 240 psi