Highly effective, strong alkaline cleaner. It easily dissolves encrustations, soilings and sediments of all kinds. Viscous and moderately foaming. For the manual cleaning of grids, ovens, fryers, etc. Suitable for use in the food processing industry.
Not suitable for aluminium and other alkali- sensitive surfaces. In case of doubt, test beforehand for compatibility in a concealed area.

Ready-to-use abrasive liquid cleaner. Neither scratching nor corrosive. For the thorough and gentle removal of adhering soiling on all waterproof surfaces such as stainless steel, enamel, ceramics, porcelain, plastics, etc. Suitable for use in the food processing industry. Shake well before use. Do not dilute the product with water.

Utilises the natural ability of unique bacterial strains to degrade the solid waste that accumulates in grease traps and drain lines. For use in restaurants and food service establishments where odour-causing grease traps are present. In addition, Diner-Drain effectively degrades solid waste that accumulates in lift stations, septic tanks, porta-toilets and drain pipes.

Rampmat

An economical anti-fatigue mat

• An economical anti-fatigue mat for the workplace.
• Raised circular surface for superior slip resistance.
• Conforms to Slip Resistance Test EN 13552 Category R10.
• Open drainage holes for spilt liquids.
• Made from hardwearing NBR rubber
• Moulded bevelled edges reduce trip hazards.

Material: NBR rubber

Surface Finish: Raised circular surface

Product Height: 10mm

Operating Temperature: -20°C to +130°C

Installation Method: Loose lay

Cleaning Method: Roll up the mat to clean the floor and wash the mat with water.

Notes: Silicone is used in the production process of the mats and a residue will possibly be left on the mat

Bubblemat

Hard wearing rubber mat

• Hard wearing rubber mat.
• Raised surface stimulates blood circulation on foot movement.
• Safety bevelled edging as standard.

Material: (100% natural rubber) and other approved rubber chemicals used in rubber industry.

Surface Finish: Bubble shaped

Product Height: 14mm

Operating Temperature: -30°C to +50°

Resistant to Chemicals: Resistant to water and most mild acids

Environmental Resistance: Use predominantly in dry areas

Typical Applications: Ideal for manufacturing production areas where employees are standing in static positions

Installation Method: Loose Lay

Cleaning Method: Use a high pressure hose (not exceeding 60psi) to remove the dirt and debris on the mats. For best results use a mild detergent (pH 4.0-9.0) to clean the mats. Do not use steam or degreasers or caustic chemicals. Do not mechanically scrub the mats.

Product Performance: 30 BPN, According to ASTM E304

Interlocking Colour PVC Tiles

Entrace floor tile made from recycled materials

• An ideal low cost solution for refurbishing floor surfaces.
• Easy DIY installation - no adhesive required.
• Installation instructions provided.
• An ideal low cost solution for refurbishing floor surfaces. 
• This product may discolour and warp if laid in areas exposed to direct sunlight.

Material: Virgin PCV

Surface Finish: Medallion

Product Height: 4mm

Product Performance: High traffic / High load

Flame Retardency: Yes

Weight: 4.77kg / M2

Application: Factory, Warehouse, Gym, Garrage

Cleaning Method: Brush and mop on regular basis

Country of Origin: South Africa

Knee-Saver

Take the strain out of kneeling

• The ideal pad for all those uncomfortable kneeling jobs.
• Reduces knee pain and lower back stress caused by regular kneeling.
• Lightweight to carry - only 0.35kg per pad - with carrier handle.
• Resistant to oils and chemicals.
• Manufactured from closed cell PVC/nitrile blend foam. 

Material: NBR Foam

Height: 25mm

Orthomat®

The original fatigue fighter

• Pebbled ‘textured’ surface
• Available as Orthomat® Safety with bright yellow bevelled edge borders.
• Conforms to Slip Resistance Test EN13552 (Category R10).
• Fire tested to DIN54332 (B2) part of DIN4102.

Material: Virgin Closed Cell PVC (Foam)

Surface Finish: Pebble

Product Height: 9mm

Roll Length: 18.3m

Size of Safety Border: 100mm

Operating Temperature: 0°C to +60°C

Environmental Resistance: Suitable for dry indoor environments

Typical Applications: Production lines, assembly areas, packing stations, workbenches

Installation Method: Loose lay

Cleaning Method: Brush/Mop the top surface

Product Performance: Conforms to Slip Resistance Test EN 13552 (Category R10).

Flame Retardancy: Fire Tested to DIN 54332 (B2) part of DIN 4102.

Rampmat

An economical anti-fatigue mat

• An economical anti-fatigue mat for the workplace.
• Raised circular surface for superior slip resistance.
• Conforms to Slip Resistance Test EN 13552 Category R10.
• Open drainage holes for spilt liquids.
• Made from hardwearing NBR rubber
• Moulded bevelled edges reduce trip hazards.

Material: NBR rubber

Surface Finish: Raised circular surface

Product Height: 10mm

Operating Temperature: -20°C to +130°C

Installation Method: Loose lay

Cleaning Method: Roll up the mat to clean the floor and wash the mat with water.

Notes: Silicone is used in the production process of the mats and a residue will possibly be left on the mat

GripSafe

Anti-slip, protective liner

• Ideal non-slip liner for shelves and trays.
• Cushions and protects components.
• Easy to cut and trim to shape.
• Manufactured from PVC foam.
• Machine washable.
• Ideal non-slip liner for bars, shelves and trays.

Material: PVC foam

Product Height: 4mm

Typical Applications: Ideal non-slip liner for benches and drawers.

Installation Method: Loose lay

Cleaning Method: Machine washable.

Ringmat

Extremely tough rubber matting

• Rubber matting for general industrial use.
• Conforms to Slip Resistance Test EN 13552 Category R10.
• Open holes allow grass to grow through.
• Connectors available to link matting for larger areas.

Material: SBR/NBR rubber

Surface Finish: Honeycomb pattern surface with holes

Product Height: 23mm

Operating Temperature: -20°C to +160°C

Environmental Resistance: Ideal for both indoor and outdoor applications

UV Resistance: Yes

Installation Method: Loose lay

Product Performance: Conforms to Slip Resistance Test EN 13552 Category R10

Cleaning Method: Wet/Dry vacuum or simply wash down with hose

Gripfoot

Grit Tape, Cleats and Tiles for Slip-Resistance

• Abrasive grit ‘anti-slip’ products with self-adhesive backing available in tapes, cleats and tiles.
• Provides additional grip underfoot on smooth surfaces.
• Hardwearing and easy to install.
• Gripfoot Tape – versatile for floor surfaces, machinery and vehicles
• Gripfoot Cleats (rectangular) are designed for use on steps and stairs.
• Gripfoot Tiles (square) are ideal for increasing safety on smooth, tiled floors.
• Conforms to Slip Resistance Test EN 13552 Category R13

Material: Abrasive grit consisting of aluminium oxide bonded to a polymer substrate. Solvent based acrylic emulsion adhesive backing. Product supplied with a moisture resistant release liner

Surface Finish: Grit

Operating Temperature: -10°c to +60°c

Resistant to Chemicals: N/A

Environmental Resistance: Suitable for indoor environments

UV Resistance: Yes

Typical Applications: Suitable for stairs, ladders, ramps, walkways and vehicles

Installation Method: Pressure sensitive self-adhesive tape

Product Performance: Conforms to Slip Resistance Test EN 13552 Category R13

Adhesion Strength: 2.5Kg/1”

Coating Thickness: 0.05mm

Solvent Residue: 0.005

Release Force: 13Kg/m2