Product Capacity: 150kg/h

Saw Speed: 190r/min

Motor Power: 800W (1HP)

Voltage: 110/220 V

Machine Size: 390*225*415mm

Carton Size: 455*305*395mm

N. T: 26KGS

G. W: 28kgs

Power: 800W (1HP)

Throat: 254mm

Cutting capacity: 240mm

Blade length: 2,085mm

Table size: 600 x 470mm

Motor: 550W

Weight: 55kgs

Size of saw blade: 2085x15x0.5mm

Materials: 201 Stainless steel

Power: 750 W

Voltage: 220 V / 50 HZ

Vacuum pump of capacity: 20 m³ /hr

Width of heat-seal: 10 mm

Vacuum: 0.1 mpa

Machine Size: 540 x 510 x 500 mm

Convenient aerosol application for use on slides, guides, chains, linkages and other hard-to-reach areas. Protection against metal-to-metal contact giving longer machine life and greater productivity. Excellent anti-corrosion and adhesion properties inhibits metal rusting under humid conditions.

Directions for use: Shake well before use. Spray liberally onto areas to be treated. Wipe away any excess with a cloth. Reapply as required.

Appearance: Soft, white, tacky grease

Thickener: Bentonite

Working Temperature: -20 °C to 160 °C

Drop Point, °C: No drop point

Rust Test, D1743: Pass

Spanjaard FMG-X White Multi-Purpose Grease (Food Grade) is recommended for the general lubrication of equipment in food and beverage processing plants, including bushes, bearings and other machine parts. Although designed for incidental food contact applications, the excellent lubricating properties allow use in a variety of other applications, allowing rationalisation of lubricants. Provides very good water resistance properties which protect equipment against rusting especially in humid seasonally in-operative plants. Anti-wear additives protect against metal-to-metal contact giving longer machine life and greater productivity.

Directions for use: Apply by hand or grease gun. If replacing a non-bentonite-thickened grease, flush out old grease completely when switching lubricants. This is achieved by frequent re-greasing over a short time span.

NLGI Consistency: 1.5

Worked Penetration, 25°C, 1/10mm: 285 – 325

Colour: White

Thickener: Bentonite

Working Temperature, °C: -20 °C to 160 °C

Drop Point, °C: No drop point

Rust Test, D1743: Pass

Copper corrosion: 1b

4-Ball Weld Load (kgf): 500kgf

Oil Separation (1000C, 30hrs): 3%

Spanjaard FMG-X White Multi-Purpose Grease (Food Grade) is recommended for the general lubrication of equipment in food and beverage processing plants, including bushes, bearings and other machine parts. Although designed for incidental food contact applications, the excellent lubricating properties allow use in a variety of other applications, allowing rationalisation of lubricants. Provides very good water resistance properties which protect equipment against rusting especially in humid seasonally in-operative plants. Anti-wear additives protect against metal-to-metal contact giving longer machine life and greater productivity.

Directions for use: Apply by hand or grease gun. If replacing a non-bentonite-thickened grease, flush out old grease completely when switching lubricants. This is achieved by frequent re-greasing over a short time span.

NLGI Consistency: 1.5

Worked Penetration, 25°C, 1/10mm: 285 – 325

Colour: White

Thickener: Bentonite

Working Temperature: -20 °C to 160 °C

Drop Point: No drop point

Rust Test, D1743: Pass

Copper corrosion: 1b

4-Ball Weld Load (kgf): 500kgf

Oil Separation (1000C, 30hrs): 3%

Excellent assembly lubricant where elastomers and plastic materials move against metal.

Lubrication of plastic gears, mechanisms, O-rings, gaskets, valves and seals as well as surfaces that require good lubrication properties over extended periods without drying out

Seals electrical equipment against the ingress of moisture, and protects metal parts against corrosion

Acts as a release agent in the rubber & plastics industries

Apply by hand or grease gun

Consistency – NLGI grade: 2

Worked Penetration, 25°C , 1/10mm: 275

Colour: White translucent

Thickener: Silica

Drop Point, °C: No Drop Point

Evaporation Loss 30hrs @ 200°C ,%: 2.0

Cold Temperature Stability (-50oC): Conforms

Dynamic Rust Test :<1

Copper Corrosion – 24hr/100°C: Pass

Oil Separation 30h @ 200°C ,%: 4.0

Water Wash Out @ 93°C ,%: 1

Timken OK Load, kg: 1

Oxidation Resistance, D942,%>: 1

Dielectric strength, kV/mm: 15

Working Temperature, °C: -40 °C to 200 °C

Long life & high reliability.

Very solid design for maximum stability.

Weight anchors for even slipping of clips.

Easy to play.

Manual fine adjustment with adjusting screw for optimum pressure adjustment.

Simplest and less frequent refilling due to extra-long rail rod

Easy to cleaning

Materials: Stainless steel

Machine Size: 420 x 160 x 770mm

Fastener Capacity: 150KG

Length of the rail: 60 cm

Plastic bullet foot

1.2 mm 430 stainless steel top shelf

Galvanized undershelf and hat channel, Galvanized leg and socket

Customizable size and material

610 mm x 1219 mm

Power: 1500W

Voltage: 220V/50HZ

Trays: 20 Trays

Tray Size: 285 x 385 mm

Machine size: 420 x 575 x 830 mm