Spanjaard FMG-X White Multi-Purpose Grease (Food Grade) is recommended for the general lubrication of equipment in food and beverage processing plants, including bushes, bearings and other machine parts. Although designed for incidental food contact applications, the excellent lubricating properties allow use in a variety of other applications, allowing rationalisation of lubricants. Provides very good water resistance properties which protect equipment against rusting especially in humid seasonally in-operative plants. Anti-wear additives protect against metal-to-metal contact giving longer machine life and greater productivity.

Directions for use: Apply by hand or grease gun. If replacing a non-bentonite-thickened grease, flush out old grease completely when switching lubricants. This is achieved by frequent re-greasing over a short time span.

NLGI Consistency: 1.5

Worked Penetration, 25°C, 1/10mm: 285 – 325

Colour: White

Thickener: Bentonite

Working Temperature, °C: -20 °C to 160 °C

Drop Point, °C: No drop point

Rust Test, D1743: Pass

Copper corrosion: 1b

4-Ball Weld Load (kgf): 500kgf

Oil Separation (1000C, 30hrs): 3%

Spanjaard FMG-X White Multi-Purpose Grease (Food Grade) is recommended for the general lubrication of equipment in food and beverage processing plants, including bushes, bearings and other machine parts. Although designed for incidental food contact applications, the excellent lubricating properties allow use in a variety of other applications, allowing rationalisation of lubricants. Provides very good water resistance properties which protect equipment against rusting especially in humid seasonally in-operative plants. Anti-wear additives protect against metal-to-metal contact giving longer machine life and greater productivity.

Directions for use: Apply by hand or grease gun. If replacing a non-bentonite-thickened grease, flush out old grease completely when switching lubricants. This is achieved by frequent re-greasing over a short time span.

NLGI Consistency: 1.5

Worked Penetration, 25°C, 1/10mm: 285 – 325

Colour: White

Thickener: Bentonite

Working Temperature: -20 °C to 160 °C

Drop Point: No drop point

Rust Test, D1743: Pass

Copper corrosion: 1b

4-Ball Weld Load (kgf): 500kgf

Oil Separation (1000C, 30hrs): 3%

Weight anchors for even slipping of clips.

Manual fine adjustment with adjusting screw for optimum pressure adjustment.

Simplest and less frequent refilling due to extra-long rail rod

Material: Stainless Steel

Size: 420 x 160 x 770 mm

Fastener Capacity: 150 kg

Length of rail: 60 cm

With protective handle, folding, blade length 100 mm
702 22 A + 702 26 A each increasing by 1/1000"
Handle nickel-platedWith protective handle, folding, blade length 100 mm

702 22 A + 702 26 A each increasing by 1/1000"
Handle nickel-plated

Blade thickness: 5 10 15 20 25 30 40 50/100
Weight: 37 g

• Harden, tempered high quality steel blades

• 300mm length of easier access to long distance area

• 20 blades, size from 0.05 to 1.00mm

• Accurately measures brake lining

• Colour coded gauge for easy identification

- Red: 2, 3mm - Replace

- Yellow: 4, 5, 6mm - Warning

- Green: 8, 10, 12mm - Condition