• Four cutting edge products in one portable unit – Adaptive Booster, battery charger, smart maintainer and hi-tech powerbank.
• Multi-functional portable charging and maintaining you can take anywhere without being tied to a power outlet
• Connects to mains power, or hooks up to a solar panel kit or 12V battery for complete charging freedom
• Adaptive Boost works out the safest way to power up your flat battery to get you going within 15 minutes
• Smart maintainer and hi-tech powerbank to keep your battery and tech in peak condition

Technical Data

Mains Adapter

Internal Battery

Make charging easier with a permanently mounted charging cable with a battery status indicator.

Monitor and charge your battery with ease with this SmartCharge accessory. The charging cable with ring terminals is permanently mounted on your battery, saving you from having to access it every time you need to charge. Place the plug with the status indicator where you can see it to monitor it. When you need to charge, flip open the indicator, and connect your SmartCharge.

• Simple and user-friendly interface and display.
• Automatically adapts charging to your battery.
• Built-in Power supply mode.
• Monitor battery status in the display.
• Secured against short-circuiting and reverse polarity.
• Store the cable on the integrated solution.
• Will not overcharge your battery.
• The charging cycle is temperature compensated.

Functions

• Backlit user friendly interface and display.
• Adapts automatically to the size of your battery.
• A meter to easily read the actual power level of your battery.
• Integrated cable management.
• It will never over-charge your battery.
• Temperature compensated charging cycle.

• Simple and user-friendly interface and display
• Automatically adapts charging to your battery
• Built-in Power supply mode
• Battery status monitoring in the display
• Secured against short-circuiting and reverse polarity
• Integrated cable storage solution
• Will not overcharge your battery
• Temperature compensated charging

• Simple and user-friendly interface and display.
• Automatically adapts charging to your battery.
• Built-in Power supply mode.
• Battery status monitoring in the display.
• Secured against short-circuiting and reverse polarity.
• Integrated cable storage solution.
• Will not overcharge your battery.
• Temperature-compensated charging.

Use

Well suited for battery sizes up to approximately 500Ah. It can maintenance charge batteries indefinitely and handle parallel consumption up to 30A while charging. The charging voltage is temperature compensated with an external sensor.

14,7 V

Some batteries require a higher charging voltage than others (this is described son the battery). Press the 14.7V button, and the initial charging voltage will be 0.3V above than the standard level.

Power supply mode

When you need continuous current and stable voltage during ECU programming or battery replacement, you can use our workshop chargers as a power supply. Activate Powersupply-mode by holding the “ON” button until the display begins to light up in sequence.

• Test battery CCA, voltage, internal resistance, health and charge
• Test cranking and charging(alternator) systems
• Review history record
• Display test result: good battery, good battery & recharger, charge &retest, replace, bad cell & replace
• Support all battery standards, like JIS, DIN, IEC, EN, SAE, CA, CCA, GB, BCI, MCA
• Protection of short circuit and reverse connection
• All results can be shared and printed out
• Waterproof IP65
• Portable small size, easy to carry
• Fireproof shell and wire

Before use it is necessary to upload the APP to your phone either iPhone or Android as below:
1. iPhone – BT1000, App store
2. Android- BT1000, Google Play

• Bluetooth name: BT1000
• No password, automatically connect.

Download The Manual Here

Bluetooth name: BT1000
No password, automatically connect.
Operating Temperature: -15 to 100 Degrees Celsius
Plastic: Automotive Grade
Physical Dimensions: 54 x 35 x 10 mm

The Hawkins Autopro 35 is a three stage temperature compensated fully automatic microprocessor controlled units. The three charging stages are identified as Bulk, Absorption and Float. These chargers are suitable for charging all types of Lead / Calcium-, Flooded-, Maintenance Free-, Sealed-, Gel and AGM (Absorbent Glass Mat) batteries.

During the first charging stage, a constant current is applied replacing the bulk of the battery energy. During the second charging stage, the battery terminal voltage is held constant while the charging current reduces to a minimum and the final energy is absorbed by the battery. After the battery has been fully replenished the charger will switch to the last stage maintaining the battery terminal voltage at the float point indefinitely.

Rated Input Voltage : 230 Vac

Rated Output Voltage : 12 Vdc

Rated Output Current : 35 Adc

Weight: 11,5 Kg

Size: 230 x 220 x 285

• Test battery & charging/starting systems
• The latest testing results save automatically and reviewed
• Adjustable date/time, printing mode
• Print via built-in printer
• One-click function key --> shortcut for 2 quick function including voltmeter and quick test
• Test battery CCA, voltage, internal resistance, health and charge
• Display test result: good battery, good battery & recharge, charge & retest, replace, bad cell & replace
• Protection of short circuit and reverse connection

• Work on 12V vehicle and motorcycle batteries
• Test battery & charging/starting systems
• The latest testing result save automatically and reviewed
• Print function via PC printer
• One-click function key -shortcut for 2 quick function including voltmeter and quick test
• Test battery CCA, voltage, internal resistance, health and charge
• Protection of short circuit and reverse connection

• Easy-to-read, color-coded float indicates battery charge

• Rubber bulb and acid-resistant rubber tip

Extended test mode: Tests can be conducted on a wide variety of batteries, including 12 V and 24 V starter and charging system

Even more accurate tests results due to optimal amp clamp upgrade

Test algorithms are optimised, allowing for new batteries or never installed batteries to be tested.

Load-free test procedure: Produces fast, precise and reliable measurement results

Large LCD screen

Integrated printer for immediate, clear and easy to understand graphical printouts

Can store up to 100 test reports to maintain history of service records for future communication with customers

Keep software up-to-date trough USB port

Connection cable is 3 m long, to allow for maximum coverage around the vehicle

Only weighs 700 g to enable one hand use

Battery nominal voltage: 6 V / 12 V

Application: Passenger Car / commercial vehicle, motorcycle, marine

Battery types: Lead-acid, gel & AGM

Test standards: JIS, EN, DIN, SAE, IEC, EN2

Battery size (in acc. with CCA): 100 - 2000 A

Starting/charging system test: 12 V / 24 V

Menu languages: 21

Dimensions (W x H x D): approx. 270 x 113 x 50 mm

Weight approx.: 700 g

Operating temperature: 0 °C - 40 °C