Standard Duty | Orange stripe 

Working pressure of 700 kPa 

Burst pressure of 2 800 kPa 

Orthomat®

The original fatigue fighter

• Pebbled ‘textured’ surface
• Available as Orthomat® Safety with bright yellow bevelled edge borders.
• Conforms to Slip Resistance Test EN13552 (Category R10).
• Fire tested to DIN54332 (B2) part of DIN4102.

Material: Virgin Closed Cell PVC (Foam)

Surface Finish: Pebble

Product Height: 9mm

Roll Length: 18.3m

Size of Safety Border: 100mm

Operating Temperature: 0°C to +60°C

Environmental Resistance: Suitable for dry indoor environments

Typical Applications: Production lines, assembly areas, packing stations, workbenches

Installation Method: Loose lay

Cleaning Method: Brush/Mop the top surface

Product Performance: Conforms to Slip Resistance Test EN 13552 (Category R10).

Flame Retardancy: Fire Tested to DIN 54332 (B2) part of DIN 4102.

Gripfoot

Grit Tape, Cleats and Tiles for Slip-Resistance

• Abrasive grit ‘anti-slip’ products with self-adhesive backing available in tapes, cleats and tiles.
• Provides additional grip underfoot on smooth surfaces.
• Hardwearing and easy to install.
• Gripfoot Tape – versatile for floor surfaces, machinery and vehicles
• Gripfoot Cleats (rectangular) are designed for use on steps and stairs.
• Gripfoot Tiles (square) are ideal for increasing safety on smooth, tiled floors.
• Conforms to Slip Resistance Test EN 13552 Category R13

Material: Abrasive grit consisting of aluminium oxide bonded to a polymer substrate. Solvent based acrylic emulsion adhesive backing. Product supplied with a moisture resistant release liner

Surface Finish: Grit

Operating Temperature: -10°c to +60°c

Resistant to Chemicals: N/A

Environmental Resistance: Suitable for indoor environments

UV Resistance: Yes

Typical Applications: Suitable for stairs, ladders, ramps, walkways and vehicles

Installation Method: Pressure sensitive self-adhesive tape

Product Performance: Conforms to Slip Resistance Test EN 13552 Category R13

Adhesion Strength: 2.5Kg/1”

Coating Thickness: 0.05mm

Solvent Residue: 0.005

Release Force: 13Kg/m2

Actual Power : 15W
Certificate:CE, RoHS, IP67, IP69K, Emark
Operating Voltage: 10-30V DC
Effective Lumen:1210 lm
Current Draw: 1.25A@12V, 0.625A@24V
Color Temperature:6000K
Optional Beam: Narrow 30°

Excellent assembly lubricant where elastomers and plastic materials move against metal.

Lubrication of plastic gears, mechanisms, O-rings, gaskets, valves and seals as well as surfaces that require good lubrication properties over extended periods without drying out

Seals electrical equipment against the ingress of moisture, and protects metal parts against corrosion

Acts as a release agent in the rubber & plastics industries

Apply by hand or grease gun

Consistency – NLGI grade: 2

Worked Penetration, 25°C , 1/10mm: 275

Colour: White translucent

Thickener: Silica

Drop Point, °C: No Drop Point

Evaporation Loss 30hrs @ 200°C ,%: 2.0

Cold Temperature Stability (-50oC): Conforms

Dynamic Rust Test :<1

Copper Corrosion – 24hr/100°C: Pass

Oil Separation 30h @ 200°C ,%: 4.0

Water Wash Out @ 93°C ,%: 1

Timken OK Load, kg: 1

Oxidation Resistance, D942,%>: 1

Dielectric strength, kV/mm: 15

Working Temperature, °C: -40 °C to 200 °C

• Filter keeps water, dirt and other particles from entering air line
• Regulator for precise air pressure control
• Improves spray painting performance

• Double strand polyester braiding
• 1/4" Solid brass fittings
• 300 Psi maximum working pressure

• 1 - 4" Air Blow Gun
• 1 - Tire Gauge
• 1 - 1/4" Female Dual Head Tire Chuck
• 1 - 1/4" Air Male Coupler
• 1 - 1/4" Air Female Coupler
• 2 - 1/4" Air Female Connector
• 4 - 1/4" Air Male Connector
• 1 - Air Female Hose Connector
• 2 - Air Male Hose Connectors