• This low-profile flat deck Slimsport rack has a load-carrying area of 1468mm (57.8") x 1233mm (48.5").
• The sleek side rails have integrated mounting feet. The mounting feet also have additional brace brackets for added strength.
• The high-strength aluminum slats have T-slots suitable for all Front Runner top mount accessories (not included).
• The included standard full fairing with rubber edge trim, makes the rack ultra-quiet.
• Fitment guide and all mounting hardware included.
• 6"/T30 Torx Allen Key for Slimsport Rack is required for installation.
• Note: Drilling required.
• Note: Under Rack Tables and some side mount accessories such as Hi-Lift Jack Bracket and Recovery Device & Gear Holding Side Brackets are not compatible with the Slimsport Tray range.

KSFR007T - Ford Ranger T6.2 Wildtrak/Raptor Double Cab (2022-Current) Slimsport Roof Rack Kit 

Consisting of:
1x KSFR005 - Ford Ranger T6 Double Cab (22-Curr)Slimsport Roof Rack Kit
1x RRAC251 - Ford Ranger T6 Dbl Cab(22-Curr)SlimSport Wind Fairing
1x RRAC971 - Protection Strip

Material Used:
Black epoxy powder - coated T6 aluminium
High strength steel

Assembled Tray Dimensions:
1468mm (57.8") L x 1233mm (48.5") W x 139mm (5.5") H

Approximate Installed Weight: 27.86kg (61.42lbs)

The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.

To determine the approximate height from your vehicle’s roof to the top of your Slimsport Rack add 60mm-70mm (2.4"-2.8") to the highest point of your roof.

Set of 2

• This 1358mm/53.5” long, full-size Slimline II Cargo Roof Rack kit contains the Slimline II Tray, Wind Deflector and two (2) Foot Rails to mount the Slimline II Tray.
• All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle-specific foot rails have openings for storing compatible gear under the rack, such as Front Runner tables.
• Foot Rails allow access to Tables that mount under the rack (1 smaller Pro Stainless Steel Prep Table Kit or 1 larger Pro Stainless Steel Camp Table Kit).
• Drilling is not required for WildTrak models. For non WildTrak models, drilling into the plastic trim is required for installation.

RFR015T - Ford Ranger T6.2 Wildtrak/Raptor Double Cab (2022-Current) Slimline II Roof Rack Kit

Consisting of:
1x FAFR008 - Ford Ranger T6 DC (2022-Curr) Foot Rails
1x RRSTD07 - SLII Tray - 1255mm(W)X1358mm(L)

Material Used:
Black epoxy powder - coated T6 aluminium
High strength steel

Approximate Installed Weight: 30.221kg (66.63lbs)

The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.

To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.

If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.

If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.