• This 12V, compact air compressor is perfect for on the go. After a day on the trails or a weekend on the beach, it conveniently airs up your tyres again. It comes in an impact resistance, weather proof case, which protects the compressor in various conditions, perfect for the outdoors. The compressor also has a stainless steel heat shield, that covers the hot touch areas of the compressor, allow a safer operation.

•  

• Pressure switch integrated with an over-pressure safety valve
• Motor equipped with internal thermal protection against extreme temperatures
• Weather-proof, impact-resistant polypropylene carry case
• 50% duty cycle ensures reliable performance
• Hard-anodized cylinder bore minimizes friction
• Teflon-impregnated carbon fiber piston seals for enhanced durability
• Convenient neoprene pocket for storing air hose and accessories

Dimension (L x W x H): 35.5 x 31 x 18 cm

Weight: 7kg

Volts: 12V

Max Psi: 100

Prop 65: No

Max Amps: 32

IP Rating: IP55

Duty Cycle: 50% 30/30

Air Flow OPSI: 3.08CFM

Air Flow 29PSI: 2.34CFM

• This 1358mm/53.5” long, full-size Slimline II Cargo Roof Rack kit contains the Slimline II Tray, Wind Deflector and two (2) Foot Rails to mount the Slimline II Tray.
• All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle-specific foot rails have openings for storing compatible gear under the rack, such as Front Runner tables.
• Foot Rails allow access to Tables that mount under the rack (1 smaller Pro Stainless Steel Prep Table Kit or 1 larger Pro Stainless Steel Camp Table Kit).
• Drilling is not required for WildTrak models. For non WildTrak models, drilling into the plastic trim is required for installation.

RFR015T - Ford Ranger T6.2 Wildtrak/Raptor Double Cab (2022-Current) Slimline II Roof Rack Kit

Consisting of:
1x FAFR008 - Ford Ranger T6 DC (2022-Curr) Foot Rails
1x RRSTD07 - SLII Tray - 1255mm(W)X1358mm(L)

Material Used:
Black epoxy powder - coated T6 aluminium
High strength steel

Approximate Installed Weight: 30.221kg (66.63lbs)

The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.

To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.

If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.

If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.

1 x Digital Voltmeter

1 x Main On/Off Switch

1 x Charge Manager

1 x PD + QC3.0 USB Charger

1 x Cigarette Socket

1 x Voltmeter & PD + QC3.0 USB Charger

6 x 50AMP Anderson Plug

1 x 175AMP Anderson Plug

Voltage: DC 9V - 23V

Current: 25AMP

Dimensions

(L)340 x (W)185 x (H)250mm

Suits Battery Size

(L)340 x (W)185 x (H)235mm