Interior Size:
L  92.5"/235cm x W  56.3"/143cm  x H  38.6"/98 cm
 
Fly Sheet Size:
L 102.4"/260cm x W  63"/160cm x H  40.2"/102cm
 
Folded Size:   
34"/ 86.4cm  x  3" / 7.6cm
 
 
Materials:
Fly sheet :190T polyester PU coated water proof 1500mm
Inner tent :190T Breathable
Floor: 210D Oxford 3000mm
Fiberglass Frame: 6.00mm
Carry bag: 600*300D Oxford
 
This tent is made of flame resistant fabric and meets the flammability requirements of CPAI-84.
 
Weight:
3.4 kg (7.5 lbs) (weight incl. tent, stakes, carry bag)

Hardshell:

• The hardshell is moulded from UV resistant fibreglass which increases the life span and reduces maintenance of the rip stop canvas tent enclosed inside the hard shell.
• High quality automotive rubbers are used to give a dust- and waterproof seal.
• The aerodynamic design reduces wind resistance and aids in more fuel efficient travel.
• The bottom base is constructed using honeycomb technology to insulate against harsh weather conditions.
• The inside of the top part is finished off with high quality felt. This gives a durable finish and reduces condensation.
• The hard shell is designed for ample storage of bedding when closed and is also secured with two lockable latches to keep out those unwanted fingers.
• Heavy duty gas shocks are fitted to assist in opening and closing of the hard shell. Gas shocks are lockable to prevent unwanted closure.

Tent:

• The tent is designed with quality and outdoor comfort in mind, therefore only the best materials are used in manufacturing.
• Any of the 3 large openings can be used as the door.
• Mosquito netting is fixed on the outside of all 3 openings so that the opening can be closed from the inside without letting any insects in.
• Openings also close upwards to adjust size of opening according to the weather conditions.
• Two internal storage pockets are provided inside the tent for smaller items such as keys etc.
• A low energy consumption 12volt LED light is fitted inside the tent and power is supplied by an external waterproof power socket and a 3m coiled wire.
• A 75mm high density mattress with zip off cover for washing is supplied inside the tent.
• A unique bungee cord is fitted to simplify the closing of the hard shell tent.
• The extra large rain skirt at the main opening keeps you dry when you enter/exit the tent in wet conditions and keeps the entrance in shade during the day without obstructing the view from inside the tent.
• A heavy duty telescopic ladder with 40mm treads for bare feet comfort is supplied that fits into C-shaped channel in front of any of the 3 openings.

Mattress size: 1350mm x 2150mm.

These fully retractable awnings are unique, self-contained and maintenance free. They are manufactured to the highest of standards using top quality laminated PVC fabric housed in a compact, lightweight, anodised aluminium casing. The easy pull, roll-up torsion mechanism with attached adjustable rafter arms and support legs, complete these simple- to-operate awnings. A must for minimotor homes, vans, bakkies and 4x4 owners.

Awning material: Laminated PVC

Frame: Aluminium casing & frame 

Length: 3.5m

Extension: 2m

These fully retractable awnings are unique, self-contained and maintenance free. They are manufactured to the highest of standards using top quality laminated PVC fabric housed in a compact, lightweight, anodised aluminium casing. The easy pull, roll-up torsion mechanism with attached adjustable rafter arms and support legs, complete these simple- to-operate awnings. A must for minimotor homes, vans, bakkies and 4x4 owners.

Awning material: Laminated PVC

Frame: Aluminium casing & frame 

Length: 3m

Extension: 2m

Beige canvas and silver casing

These fully retractable awnings are unique, self-contained and maintenance free. A must for mini-motor homes, vans, bakkies and 4x4 owners.

CASING MATERIAL

Compact and lightweight anodised aluminium casing

AWNING MATERIAL

Top quality laminated PVC fabric.

FRAME AND POLES

The easy pull, roll-up torsion mechanism.

Adjustable rafter poles and support legs.

Aluminium frame.

Awning material: Laminated PVC

Frame: Aluminium casing & frame 

Length: 2.5m

Extension: 2m

3 Person Tent

Dimension: 310 x 210 cm

Material: Polyester, water proof

Frame: Aluminium Tubes

The Alu-Cab Shower Cube is a modular and universal accessory, designed to interface with all existing Alu-Cab base unit platforms. There are brackets available separately for: Generation 3.1 Tent, Generation 3.R Tent, the Canopy Camper, the Khaya, our Roof Conversions as well as most popular roof racks.

The shower cube can be used as a shower or simply as a privacy cube. Being very quick to open and assemble, the shower cube is a quick change or shower just minutes away.

The main box once open, acts as a shelf, allowing you to place your shower necessities inside (remember to remove before closing the cubicle).

• Light-weight aluminium construction
• Easy to open and close
• Arms lock into place, ensuring the cubicle is secure
• Quick drying taffeta shower curtain, weighted at the bottom to retain shape
• A separate roof flap that can be deployed to keep warm air in
• An added zip to allow access to the vehicle door/window
• Heavy duty zipped storage bag
• Double access point (two zips) – Enables one to mount to lefthand or righthand side of your vehicle.
• Adjustable tent peg straps, to accommodate vehicles with differing ride heights.

• Size open: 109.6 (L) x 92.9 (W) x 191.7 (H) cm
• Size closed: 105.5 x (L) x 11.9 (W) x 18.7 (H) cm
• Mass: 9 kg