The new REBEL Safetygear Platinum Collection offers you the latest safety innovations in safety footwear products that are also built to look genuinely good and offer extreme comfort. The Lo-Top shoe is ISO 20345 approved. This stylish safety shoe offers you an easy slip-on solution with supreme comfort. A high quality, premium leather is used, while safety features include steel toe cap, anti-static, oil resistance and heat resistance.

Materials:

• Upper: Quality, Durable Tear-Resistant Microfibre Upper
• Lining: Breathable and Abrasion Resistant Tai-brelle

Eyelet:

• Round Eylets

Special Features:

• Smooth finish microfibre upper
• Sole resistant to 90 °C (degrees Celsius)
• Padded Tongue ensures maximum comfort
• Padded Upper Collar ensures increased comfort

Sole:

• Temperature Maximum 90 °C (degrees Celsius)
• Inner Sole - Full Removable Mesh & EVA Inner Soles
• Dual Density Poly-Urethane Sole
• Oil and acid resistant Dual Density PU
• Slip Resistance – Tested to SATRA PM144 1992 and meets these requirements
• However, care should always be taken on wet or oily surfaces
• Crack Resistance – Tested to 30.000 flex cycles
• Grey & Dark Grey Outer Sole  

Toe Cap:

• Wide Profile Steel Toe-Cap
• Tested to an impact resistance of 200 Joules

Anti-Static Properties:

• Product is anti-static. If application is life critical additional consultation with product expert is required. Electrical resistance can be significantly changed by flexing, contamination or moisture. Introduction of inner sole reduces static resistance

Upper:

• Full grain leather
• 3 pair D-ring lace-up with hooks
• Padded tongue and collar for comfort

Lining:

• Needle-fibred vamp lining for excellent perspiration absorbency
• Anti-static non-woven in-sock for comfort and stability
• Anti-bacterial Energiser woollen top sock with anti-microbial properties

Midsole:

• Shank reinforcement for arch support

Toe Cap:

• Steel

Sole:

• Double Density PU/PU (Heat-resistant up to 95°C)

Upper: Full grain leather | 3 pair D-ring lace-up with hooks | Padded bellows tongue and collar for comfort | Extra-wide fitting upper as per podiatry specifications

Lining: Needle-fibred vamp lining for excellent perspiration absorbency | Anti-static, non-woven in-sock with Poron at the ball and heel of the foot for flexibility, comfort and stability | Anti-bacterial Energiser EVA top sock with Poron at the ball and heel of the foot for comfort and anti-fatigue support

Midsole: Engineered with an EVA heel insert for shock absorption | Shank reinforcement for additional arch support | Steel midsole available

Toe cap: Steel - extra-wide fitting

Sole: Double Density PU/PU (Heat-resistant up to 95°C)

The benchmark in quality workboots! The Chukka Boot is ISO 20345 and SABS approved, and has a range of high quality features, including premium leather and very comfortable soles, all while setting the standard for true quality safety footwear suitable for those always on the move. 

• Highly durable full leather upper
• Padded Bellows tongue for comfort and protection against sparks and shavings
• Lightweight dual density polyurethane sole
• Ultra-comfortable inner sole
• Maxi-grip outer sole – ensuring high durability and slip resistance
• Taibrelle moisture wicking lining
• Rustproof brass D-rings

Materials:

• Upper: Full Grain High Quality Buffalo Leather - Bartan Print / Hi-Visibility “In the Dark” Safety Strip for added visibility
• Inner Sole: Biagioli IBITECH 252 2mm Foam Insole Board
• Lining: Breathable and Abrasion Resistant Tai-brelle (Equivalent to Cambrelle)

Eyelet:

• Nickel-free D-Rings

Special Features:

• Hi-Viz “In the Dark” Safety Strip for added visibility
• Highly padded bellows tongue for comfort & protection against sparks & shavings

Sole:

• Dual Density Poly Urethane REBEL Sole - Injection moulded
• Temperature Maximum 90ºC (degrees Celsius)
• Oil and acid resistant Dual Density PU
• Slip Resistance - Tested to SATRA PM144 1992 and meets these requirements. However, care should always be taken on wet or oily surfaces
• Crack Resistance - Tested to 30,000 flex cycles

Toe Cap:

• Steel Toe Cap - Tested to an impact resistance of 200 Joules

Anti Static Properties:

• Product is anti static. If application is life critical additional consultation with product expert is required. Electrical resistance can be significantly changed by flexing, contamination or moisture. Introduction of additional inner sole reduces static resistance

Upper: Full grain leather | 4 pair Ghillie loops with 1 pair non-metalic eyelets | Padded bellows tongue and collar for comfort                            Extra-wide fitting upper as per podiatry specifications

Lining: Needle-fibred vamp lining for excellent perspiration absorbency | Anti-static, non-woven in-sock with Poron at the ball and heel of the foot for flexibility, comfort and stability | Anti-bacterial Energiser EVA top sock with Poron at the ball and heel of the foot for comfort and anti-fatigue support

Midsole: Engineered with an EVA heel insert for shock absorption | Shank reinforcement for arch support

Toe cap: Composite

Sole: Double Density PU/PU (Heat-resistant up to 95°C)

Upper: Full grain leather | 4 pair D-ring lace-up with hooks | Padded bellows tongue and collar for comfort | Extra-wide fitting upper as per podiatry specifications

Lining: Needle-fibred vamp lining for excellent perspiration absorbency | Anti-static, non-woven in-sock with Poron at the ball and heel of the foot for flexibility, comfort and stability | Anti-bacterial Energiser EVA top sock with Poron at the ball and heel of the foot for comfort and anti-fatigue support

Midsole: Engineered with an EVA insert at the heel for shock absorption | Shank reinforcement for additional arch support

Toe cap: Steel - extra-wide fitting (Available without toe cap)

Sole: Double Density PU/PU (Heat-resistant up to 95°C)

Upper: Full grain leather | 5 pair D-Ring lace-up | Padded collar for comfort | Reflective safety tab on rear

Lining: Needle-fibred vamp lining for excellent perspiration absorbency | Anti-static, non-woven in-sock for flexibility, comfort and stability | Anti-bacterial Energiser woollen top sock with anti-microbial properties

Midsole: Shank reinforcement for arch support | Steel midsole available

Toe cap: Steel | Available without toe cap

Sole: Double Density PU/PU (Heat-resistant up to 95°C)

Upper: Full grain leather | 4 pair D-ring lace-up with hooks | Padded bellows tongue and collar for comfort | Extra-wide fitting upper as per podiatry specifications

Lining: Needle-fibre vamp lining for excellent perspiration absorbency | Anti-static, non-woven in-sock with Poron at the ball and heel of the foot for flexibility, comfort and stability | Anti-bacterial Energiser EVA top sock with Poron at the ball and heel of the foot for comfort and anti-fatigue support

Midsole: Engineered with an EVA heel insert for shock absorption | Shank reinforcement for additional arch support | Steel midsole available

Toe cap: Steel - extra-wide fitting

Sole: Double Density PU/PU (Heat-resistant up to 95°C)

The Chelsea features a steel toe cap, perfect those looking for a stylish and very comfortable workboot. The Chelsea is ISO 20347 approved. Features include 100% metal free design, a full grain leather with “easy-pull-on” tabs, and a wide fitting last, for added comfort. This is the epitome of comfort in a safety shoe!

• ​Smooth finish microfibre upper
• Easy “pull-on” tabs
• Sole resistant to 90ºC (degrees Celsius)
• Steel mid-sole for anti-penetration

Materials:

• Upper: Quality, Durable Tear-Resistant Microfibre Upper with easy “pull-on” tabs
• Inner Sole: Full Removable Inner Soles
• Mid-sole: Steel mid-sole (Anti-Penetration) 

Sole:

• Dual Density Poly-Urethane Sole (Beware of Cheap, Single Density Rip-offs)
• Temperature Maximum 90ºC (degrees Celsius)
• Oil and acid resistant Dual Density PU
• Slip Resistance - Tested to SATRA PM144 1992 and meets these requirements, However, care should always be taken on wet or oily surfaces
• Crack Resistance - Tested to 30,000 flex cycles

Toe Cap:

• Steel Toe-Cap
• Tested to an impact resistance of 200 Joules

Anti Static Properties:

• Product is anti static. If application is life critical additional consultation with product expert is required. Electrical resistance can be significantly changed by flexing, contamination or moisture. Introduction of additional inner sole reduces static resistance

• Wide fit steel toe cap complies with SANS/ISO 20345 to withstand an impact load of 200 joules
• Stylish leather cut from quality buffalo leather
• Leather has been tanned for softer, more comfortable feel while maintaining hard wearing characteristics
• Elastic side gussets give additional support and comfort
• Pull tab is incorporated int the body of the boot to ensure strength and durability
• TPU sole for durability with oil and acid resistance as well as anti-slip and anti-static properties
• Shank reinforcement for support and stability
• Moulded 100% wool innersole for support and comfort

Material: Full Grain Buffalo Leather

• Stylish leather cut from quality buffalo leather
• Leather has been tanned for softer, more comfortable feel while maintaining hard wearing characteristics
• Elastic side gussets give additional support and comfort
• Pull tab is incorporated into the body of the boot to ensure strength and durability
• TPU sole for durability with oil and acid resistance as well as anti-slip and anti-static properties
• Shank reinforcement for support and stability
• Moulded 100% wool innersole for support and comfort

Material: Full Grain Buffalo Leather