Wynn’s Liquid Filler Repair kit is a high strength cyanoacrylate adhesive kit with four filler options for mending a variety of broken items, from appliances, plastics, automotive interior and exterior to cracks in metal components. The filling power bonds with the liquid glue to give a high strength mend which can be filed, sanded seconds after bonding.

Applications

• Fixes appliances, plastics, automotive interior and exterior as well as cracks in metal components.

Directions

1. Make sure the surfaces to be bonded are clean and dry (preferable to solvent-wipe plastics , glass, and rubber, and to acid-treat metals).

2. Dispense a drop or drops to one surface only. Apply only enough to leave a thin film after compression.

3. Press parts together and hold firmly for a few seconds. Good contact is essential. An adequate bond develops in less than one minute. (Maximum strength is achieved in 24 to 48 hours).

4. Wipe off excess adhesive from the top of the container and recap Liquid Filler Repair Kit if left uncapped, may deteriorate by contamination from moisture in the air.

5. Because Liquid Filler Repair Kit polymerises on contact with moisture surfaces, sometimes a whitening will occur on the surface of the container or the bonded materials. Should this happen, wipe surfaces well with acetone

Packaging

6 x 20ml

Wynn’s Nut Lock & Stud Lock are solvent free products that cure in the absence of air and in the presence of metal ions. Applications includes studs, nuts, screws and any threaded fasteners. The adhesive prevents loosening caused by vibration, mechanical and thermal shock. Resistant to petrol, diesel, transmission fluid, anti-freeze, and other chemicals. Wynn’s Nut Lock and Stud Lock also inhibit fretting corrosion and prevent seizure and galling. Nut Lock is a medium strength bond which requires 20Nm torque to loosen. Stud Lock has high bond strength for more permanent locking and requires 36Nm torque to loosen.

Packaging:      7g

                        4ml

Wynn’s Pearl Glaze is a premium non-abrasive cream polish for all paint finishes including high end metallic and clear coat paintwork.

Packaging: 250ml

• High quality finish
  • Non-abrasive
  • applies easily without leaving powder residue

Wynn’s Polywax combines the benefits of polymerised silicone paint sealant with Carnuba wax. It is mildly abrasive to assist in polishing out swirl marks and minor scratches. The Polymer sealant will last one year before re-application.

Packaging: 500ml

• Dual acting polymer sealant with Carnuba wax for added protection
• Removes swirl marks and minor scratches
• Lasts up to one year

Wynn’s Revive paintwork renewer, is a burnishing compound with abrasive particles which remove faded, discoloured paint and scratches. Revive removes years of grime and oxidation in minutes.

Packaging: 375ml

• abrasive polish to restore faded paintwork
• Removes stubborn dirt and scratches
• Not recommended for metallic finishes

Wynn’s Sensor Safe, High-Temp RTV is a one-component, room temperature vulcanizing gasketing compound with features of high stability and durability. Specifically designed to provide reliable formed-in-place gaskets for mechanical assemblies that withstand operating environments up to 3430C and resistant to engine oils, fuel and anti-freeze. This product is extensively used in bonding and sealing applications on automobile engines such as joint cover of tappet cover, intake exhaust manifolds, timing chain cover, oil sump, transmission pan, and household electrical appliances.

Packaging: 90ml

Wynn’s Nut Lock & Stud Lock are solvent free products that cure in the absence of air and in the presence of metal ions. Applications includes studs, nuts, screws and any threaded fasteners. The adhesive prevents loosening caused by vibration, mechanical and thermal shock. Resistant to petrol, diesel, transmission fluid, anti-freeze, and other chemicals. Wynn’s Nut Lock and Stud Lock also inhibit fretting corrosion and prevent seizure and galling. Nut Lock is a medium strength bond which requires 20Nm torque to loosen. Stud Lock has high bond strength for more permanent locking and requires 36Nm torque to loosen.

Packaging:      7g

                        50ml

Wynn’s Super Glue is a quick drying, high strength cyanoacrylate adhesive available on a display card containing 12 x 3g tubes. The extended non-clogging nozzle allows for accurate and precision gluing.

Packaging: 3g

Wynn’s Throttle Body and Air Intake Cleaner will remove sticky residue, caused by oil mist crankcase fumes, from air intake system components as well as petrol residues, gums and resins. These tar like deposits build up on the idle speed control and butterfly valves leading to irregular airflow and erratic idling. Formulated for modern petrol vehicles, will not remove protective surface coatings and is O2/ Lambda sensor safe

Packaging: 285g

• Removes sticky air intake build up
• Restores correct airflow to improve air/fuel mixture
• Cleans contaminated EGR & idle speed valves
• Restores smooth idling & throttle response

Wynn’s Tyre Fix is a great emergency product which will re-inflate and seal a puncture without having to jack up the vehicle or remove the wheel. Simply follow the easy instructions to connect the product, inflate and seal the puncture. Ideal for all vehicles, bikes, boat trailers, caravans and 4X4’s.

Packaging:   285g

                     480g

• Inflates tyre without removing the wheel
• Seals puncture on the spot
• Safe, fast and easy to use

Direction for use:

• Move tyre valve to just before or after the highest point
• Remove object causing leak
• Deflate tyre completely
• Shake container well
• Connect end of the connector to the tyre valve
• Inflate to pressure

Wynn’s Tyre Treat is a foam cleaner which acts immediately by simply spraying the actuated foam onto the tyre. For enhanced appearance, wipe the tyre before it is dry.

Packaging:      400ml

• No pre-cleaning required
• actuated foam removes dirt in one application
• Tyres shine effortlessly when lightly wiped with cloth