Wynn’s Throttle Body and Air Intake Cleaner will remove sticky residue, caused by oil mist crankcase fumes, from air intake system components as well as petrol residues, gums and resins. These tar like deposits build up on the idle speed control and butterfly valves leading to irregular airflow and erratic idling. Formulated for modern petrol vehicles, will not remove protective surface coatings and is O2/ Lambda sensor safe

Packaging: 285g

• Removes sticky air intake build up
• Restores correct airflow to improve air/fuel mixture
• Cleans contaminated EGR & idle speed valves
• Restores smooth idling & throttle response

Wynn’s Nut Lock & Stud Lock are solvent free products that cure in the absence of air and in the presence of metal ions. Applications includes studs, nuts, screws and any threaded fasteners. The adhesive prevents loosening caused by vibration, mechanical and thermal shock. Resistant to petrol, diesel, transmission fluid, anti-freeze, and other chemicals. Wynn’s Nut Lock and Stud Lock also inhibit fretting corrosion and prevent seizure and galling. Nut Lock is a medium strength bond which requires 20Nm torque to loosen. Stud Lock has high bond strength for more permanent locking and requires 36Nm torque to loosen.

Packaging:      7g

                        50ml

Wynn’s Sensor Safe, High-Temp RTV is a one-component, room temperature vulcanizing gasketing compound with features of high stability and durability. Specifically designed to provide reliable formed-in-place gaskets for mechanical assemblies that withstand operating environments up to 3430C and resistant to engine oils, fuel and anti-freeze. This product is extensively used in bonding and sealing applications on automobile engines such as joint cover of tappet cover, intake exhaust manifolds, timing chain cover, oil sump, transmission pan, and household electrical appliances.

Packaging: 90ml

Wynn’s Revive paintwork renewer, is a burnishing compound with abrasive particles which remove faded, discoloured paint and scratches. Revive removes years of grime and oxidation in minutes.

Packaging: 375ml

• abrasive polish to restore faded paintwork
• Removes stubborn dirt and scratches
• Not recommended for metallic finishes

Wynn’s Polywax combines the benefits of polymerised silicone paint sealant with Carnuba wax. It is mildly abrasive to assist in polishing out swirl marks and minor scratches. The Polymer sealant will last one year before re-application.

Packaging: 500ml

• Dual acting polymer sealant with Carnuba wax for added protection
• Removes swirl marks and minor scratches
• Lasts up to one year

Wynn’s Pearl Glaze is a premium non-abrasive cream polish for all paint finishes including high end metallic and clear coat paintwork.

Packaging: 250ml

• High quality finish
  • Non-abrasive
  • applies easily without leaving powder residue

Wynn’s Nut Lock & Stud Lock are solvent free products that cure in the absence of air and in the presence of metal ions. Applications includes studs, nuts, screws and any threaded fasteners. The adhesive prevents loosening caused by vibration, mechanical and thermal shock. Resistant to petrol, diesel, transmission fluid, anti-freeze, and other chemicals. Wynn’s Nut Lock and Stud Lock also inhibit fretting corrosion and prevent seizure and galling. Nut Lock is a medium strength bond which requires 20Nm torque to loosen. Stud Lock has high bond strength for more permanent locking and requires 36Nm torque to loosen.

Packaging:      7g

                        4ml

Wynn’s Leather Care Crème treats and protects leather and vinyl seats, jackets, lounge suites or any leather item requiring superior nourishment and care. It contains unique ingredients such as lanolin, jojoba oil, silicones, softeners, cleaning agents and a UV protector. Leather Care Crème will not stain clothing and will care for the finest leather.

• For all leather articles
• Cleans and nourishes
• UV protection

Wynn’s Hot Wax Car Shampoo is a unique wax wash containing Carnuba wax which plates out on the paint to preserve polish and sealants. After washing you may rinse but not essential. Simply dry the car and buff windows and bright work.

• Carnuba wax shampoo
• Cleans shines and protects
• One cap treats 5L of hot or cold water

Applications

• Use on paint work between polishes to clean and protect from the elements

Directions

• Add 1 cap to 5L hot or cold water
• Lather and apply liberally onto paint and bright work
• Rinse off if desired
• Buff with soft dry cloth

Packaging

12 x 500ML

Wynn’s Hammer Forged Exhaust Sealant moulds easily around exhaust joints to form a perfect seal. It is heat and vibration resistant and assists fitment by lubricating the flange before setting.

• Easy to mould into shape
• Seals exhaust joints gas tight
• Assists ease of fitment when joining an exhaust

Directions

• Apply to pipe before assembly
• Fit parts together
• Allow to set

Packaging

200g

Wynn’s Grinding Paste is water based abrasive paste solution for asperity removal from metal surfaces. It is a dual package containing fine and coarse grit for professional results. Can be used to seat new valves, sharpen blades, remove score marks, lapping, tool making etc.

• Dual grit size package
• Provides lubrication while grinding
• Professional results in multiple application

Wynn’s Fresh Air Ultrasonic® is a neutral water based solution that eliminates the growth medium of microorganisms.

It removes greasy deposits, dust and other contamination from the air conditioning’s evaporator. The surfactants used are biodegradable and the efficiency of the product against bacteria and fungi has been tested to completely eliminate harmful micro-organisms associated with air-conditioner systems.

• Nebulized molecules pass through micro and pollen filters
• Eliminates all harmful micro-organisms
• 15 minute treatment

Applications

• Air conditioning systems in cars, trucks and buses
• A repeated treatment each year is recommended

Packaging

12 x 100ml

Wynn’s Exhaust Sealant provides an easy, permanent and gas tight seal of small to medium sized holes in the exhaust. The heat of the exhaust hardens the sealant to form a solid permanent fix.

• Seals small to medium sized holes
• Heat cures to create permanent seal
• Cost effective solution

Directions

• Clean surface of any dirt or oil
• Place Exhaust Sealer putty externally over the hole
• Allow to dry
• Start engine to supply heat for curing

Packaging

12 x 200g

Wynn’s Engine Start is the easy solution to starting problems. Avoids wear of the starter motor and prevents battery drain. Engine start assists with cold weather starting, flooded engines and helps restore fuel pump pressure after a vehicle has run dry.

Unlike many starting fluids, Wynn’s Engine Start can be used in 4 stroke and 2 stroke engines as it contains a friction proofing lubricant.

• Fast acting starting solution
• 2 stroke engine safe
• Contains friction proofing
• For petrol or diesel engines

Applications

• Petrol or Diesel engines to promote easy starting
• Vehicles and motor bikes, especially if not in regular use
• Outboard motors and two stoke engines
• Mowers, chain saws, weed eaters etc.

Directions

• Hold can upright              
• Remove air filter for best results              
• Spray into air intake for a few seconds then crank engine            
• Repeat if necessary       

Packaging

12 x 200ml

12 x 375ml

Wynn’s Engine Cleaner & Degreaser is a solvent based degreaser for heavy duty cleaning of engine parts and exterior. It lifts dirt, grime and oil off bikes, chains, quads, etc.

• Strong solvent action lifts dirt and grime as well as oil from fouled motor components
• Effective on the heaviest grease build-up
• Can be used in a high pressure sprayer
• Easy to use squirt bottle for convenient and efficient cleaning

Applications

• Cars, bikes, quads, trailers, bicycles, engine parts etc.
• Avoid solvent sensitive materials such as paintwork and soft plastics

Directions

• Use easy spray nozzle to apply to dirty area
• Brush or wipe away dirt with cloth
• Rinse off with water

Packaging

12 x 500ml

Wynn’s Carb Cleaner is a powerful solvent which enables you to clean the carburettors without dismantling. Simply spray it into the float chamber vent to clean the inside and down the throat for rapid results. Spray onto the outside to clean the exterior.

Cleans without dismantling

Rapidly dissolves gums, resins, & tar deposits

Restores smooth idling & efficient fuel delivery

Applications

• Fuel starvation
• Dirt and gum in carb blocking jets
• Old oxidised fuel left in carburettor
• Starting problems

Directions

• Remove air filter
• Spray all exposed surfaces in carburettor throat               
• Start engine - spray into float chamber.
• Rev engine moderately
• Stop engine and spay-clean outside surfaces as required.            
• Adjust air fuel mixture and idle 

Packaging

12 x 500ml

12 x 285g

12 x 200ml

Wynn’s Bright Spark is an intelligent electrical circuit and contact cleaner. Spray directly onto surfaces to be cleaned to restore good electrical contact. It will remove all dirt, flux and oily residue as well as remove moisture. Ideal for sensitive electronics, printed circuits, switches and electrical panels. Safe to use on most plastics, rubber and metal.

• Fast and convenient cleaning action
• Quick drying formula removes moisture
• Inhibits corrosion
• Extension tube facilitates easy spot cleaning in hard to reach areas
• Non-Flammable

Directions

• Spray directly onto surfaces to be cleaned          
• Insert extension tube to spot clean and reach into awkward areas          
• Warning: Test for compatibility before using on plastics

Packaging

12 x 200ml

Wynn’s Black Back brings back the black on faded bumpers, grills, spoilers, louvers, dashboards, tyres and other black trim.

• Easy to use
• Covers grey faded areas instantly
• Long lasting
• Spreads evenly and consistently

Applications

• Bumpers
• Grills
• Spoilers
• Louvers
• Dashboards
• Tyres and other black trim

Directions

• Shake well         
• Apply Black Back with sponge or brush  
• Leave to cure for at least 30 minutes or overnight            
• Buff when dry  
• Avoid contact with paint or chrome        

Packaging

12 x 200ml

Wynn’s Coolant/ Antifreeze is a concentrate designed to meet old and modern vehicle requirements made from the finest Euro spec glycols, anti-corrosion and anti-foam agents to provide superior protection.

• Freezing Point at 40% dilution -25 degrees C (ASTM D1177)
• Wynn’s Coolant/Antifreeze meets ASTM D3306/D4985;
• SAE J-1034; British & Fed. Standards
• Protects cooling system from fouling
• Prevents corrosion
• Anti-foaming agent prevents cavitation and pitting

Applications

• Suitable for all radiator types from classics to modern aluminium core radiators
• The 1 Litre concentrate can be diluted with demineralised water as per vehicle's requirements

Directions

• Dilute contents as desired, then simply pour into the radiator filling reservoir until it is full
• Run the vehicle until normal operating temperature is reached
• Continue to top up while vehicle is idling until the full level is maintained
• It is recommended that all old coolant is flushed using Wynn’s Radiator Flush before replacing with new coolant
• Do not mix with OAT coolant

Packaging

12 x 1 Litre

Wynn’s Super Epoxy is a two-component, low viscosity, fast curing adhesive formulated to bond an extensive range of substrates including metal, ceramic, rigid plastic and wood. Applied in single action, this product cures with excellent adhesion and is extensively used in applications such as metal toys, automobile plastic panels, fuel tanks, bumpers, mirrors, electrical appliances and industrial oil tanks, transformers and radiators.

Applications

Bonds metal, ceramic, rigid plastic, wood as well as many other materials

Packaging

6 x 32ml

Wynn’s Steel Epoxy is a two-component, low odour, fast curing adhesive formulated to bond an extensive range of substrates including steel, brass, copper, iron, plastic, wood, concrete and ceramics. Applied in single action, this product cures with high bonding strength, resistance to high temperature, pressure and grease. Suitable for use to repair worn valve seats, cracked housings, copper and cylinder heads, gas tank, plumbing and radiator leaks, torn keyways, stripped threads, toys and furniture.

Applications

Bonds steel, brass, copper, iron, plastic, wood, concrete and ceramics

Packaging

6x 32ml

Superior PTFE lubrication with high load carrying properties. Ideal for garage worm gears, bike chains, fishing reels, gun mechanisms, gym equipment and micro gears. Wynflon is a clean lubricant which flashes off the surface leaving dry solids to lubricate.

Packaging:          200ml

• Penetrating oil containing PTFE  (Polytetrafluoroethylene) solids
• Clean, dry lubricant
• Water repellent
• Residue free

White Lithium-based Grease aerosol lubricant sprays on like a fluid, then congeals to a grease for prolonged lubrication intervals. Effective lubrication and protection for automotive, domestic and light duty applications, including battery terminals, locks, hinges, latches etc.

• Resistant to water
• Prevents corrosion
• Temperature range from -150C to 1200C
• Excellent metal retention

Wynn’s Tyre & Trim Shine is a silicone cleaner, protector and beautifier for all exterior plastics, vinyl, rubbers and tyres. Applies easily leaving exterior trim looking like new while protecting from UV. The special anti-static formula prevents dust and dirt from accumulating on treated surfaces keeping them cleaner for long

• Tough exterior cleaner and protector for tyres, bumpers, rubbers and trim
• UV protector
• anti-static formula

Promotes complete petrol combustion while cleaning carbon deposits from the upper cylinder preventing preignition and engine run-on. Ideal to use in engines which are not run regularly to avoid fuel deposits and carbon build up caused by contamination and adverse effects of fuel degradation.

Packaging:          125ml

• Supports complete combustion
• Frees sticky piston rings
• Reduces exhaust emissions
• Maintains lambda/O2 sensor and EGR cleanliness
• Inhibits corrosion and improves fuel consumption

A multi-purpose silicone-based spray, ideal for everyday household and elastomer lubrication such as door hinges, sticky locks, drawers, curtain rails and especially effective on rubber, plastic & nylon sliders.

Packaging:          500ml

• Provides dry lubrication.
• Reduces static electricity.
• Prevents sticking of materials.
• Protects against rust and corrosion.
• Is water and moisture repellent.
• Prevents stick-slip.
• Does not stick, stain and oxidize.
• Guards against wear of hard on soft and soft on hard material.

Wynn’s Scratch Remover is an abrasive polishing paste with micro particles which remove scratches and scuff marks commonly associated with everyday knocks and bumps. Large angular particles abrade and break down while small smoother particles leave a polished finish.

Packaging:          100ml

• Removes scratches and scuffs from paintwork, bumpers and headlights
• Multi-action abrasive process leaves h highly polished finish
• Convenient tube prevents dirt ingress and contamination

Wynn's Radiator Stop Leak is a sealing product to stop small leaks in the cooling system, with anti-corrosive properties.

Packaging:          325ml

• Stops and prevents leakages in the radiator, cooling and heating system.
• Stops head gasket leaks.
• Will not harm rubber hoses, gaskets or other system components.
• Is compatible with all antifreezes and coolants, also with OAT coolants (Organic Acid Technology).
• Is formulated to avoid clogging of radiator waterways and temperature sensors.
• Enhanced protection against rust and corrosion.

Wynn's Radiator Flush is a concentrate to clean automotive cooling systems.

Packaging:          375ml

• Powerful acid free radiator cleaner.
• Dual action:
• 1. Removes scale.
• 2. Eliminates rust, deposits and oily residues.
• Excellent performance in all types of cooling liquid, including OAT coolant.
• Keeps dirt and particulates in suspension whilst cleaning.
• Safe for rubber hoses, seals and all metals in the cooling system.
• Extremely effective in all closed-circuit cooling systems.
• Restores the optimal operation of the controls within the cooling system.

Wynn’s Power Steering & Auto-transmission Conditioner is an oil soluble supplement developed to eliminate PAS (Power assisted Steering) stiffness, shudder and noise as well as ease shifting of automatic gearboxes. Prevents oil leaks by rejuvenating the seals while maintaining optimum performance of the PAS pump and load bearing components. Wynn’s Power Steering & Auto-transmission Conditioner can be added to all conventional ATF and power steering fluid.

Packaging:          375ml

• Eliminates Power Steering stiffness, shudder and noise

• Provides smoother operation of power assisted steering & auto-transmission gear changes
• Prevents ageing and oxidation of automatic transmission and power steering fluids
• Prevents and cures oil leaks by nourishing the rubber/ nitrile seals and O-rings