Wynn’s Engine Start is the easy solution to starting problems. Avoids wear of the starter motor and prevents battery drain. Engine start assists with cold weather starting, flooded engines and helps restore fuel pump pressure after a vehicle has run dry.

Unlike many starting fluids, Wynn’s Engine Start can be used in 4 stroke and 2 stroke engines as it contains a friction proofing lubricant.

• Fast acting starting solution
• 2 stroke engine safe
• Contains friction proofing
• For petrol or diesel engines

Applications

• Petrol or Diesel engines to promote easy starting
• Vehicles and motor bikes, especially if not in regular use
• Outboard motors and two stoke engines
• Mowers, chain saws, weed eaters etc.

Directions

• Hold can upright              
• Remove air filter for best results              
• Spray into air intake for a few seconds then crank engine            
• Repeat if necessary       

Packaging

12 x 200ml

12 x 375ml

Wynn’s Exhaust Sealant provides an easy, permanent and gas tight seal of small to medium sized holes in the exhaust. The heat of the exhaust hardens the sealant to form a solid permanent fix.

• Seals small to medium sized holes
• Heat cures to create permanent seal
• Cost effective solution

Directions

• Clean surface of any dirt or oil
• Place Exhaust Sealer putty externally over the hole
• Allow to dry
• Start engine to supply heat for curing

Packaging

12 x 200g

Wynn’s Fresh Air Ultrasonic® is a neutral water based solution that eliminates the growth medium of microorganisms.

It removes greasy deposits, dust and other contamination from the air conditioning’s evaporator. The surfactants used are biodegradable and the efficiency of the product against bacteria and fungi has been tested to completely eliminate harmful micro-organisms associated with air-conditioner systems.

• Nebulized molecules pass through micro and pollen filters
• Eliminates all harmful micro-organisms
• 15 minute treatment

Applications

• Air conditioning systems in cars, trucks and buses
• A repeated treatment each year is recommended

Packaging

12 x 100ml

Wynn’s Grinding Paste is water based abrasive paste solution for asperity removal from metal surfaces. It is a dual package containing fine and coarse grit for professional results. Can be used to seat new valves, sharpen blades, remove score marks, lapping, tool making etc.

• Dual grit size package
• Provides lubrication while grinding
• Professional results in multiple application

Wynn’s Hammer Forged Exhaust Sealant moulds easily around exhaust joints to form a perfect seal. It is heat and vibration resistant and assists fitment by lubricating the flange before setting.

• Easy to mould into shape
• Seals exhaust joints gas tight
• Assists ease of fitment when joining an exhaust

Directions

• Apply to pipe before assembly
• Fit parts together
• Allow to set

Packaging

200g