Wynn’s Engine Start is the easy solution to starting problems. Avoids wear of the starter motor and prevents battery drain. Engine start assists with cold weather starting, flooded engines and helps restore fuel pump pressure after a vehicle has run dry.

Unlike many starting fluids, Wynn’s Engine Start can be used in 4 stroke and 2 stroke engines as it contains a friction proofing lubricant.

• Fast acting starting solution
• 2 stroke engine safe
• Contains friction proofing
• For petrol or diesel engines

Applications

• Petrol or Diesel engines to promote easy starting
• Vehicles and motor bikes, especially if not in regular use
• Outboard motors and two stoke engines
• Mowers, chain saws, weed eaters etc.

Directions

• Hold can upright              
• Remove air filter for best results              
• Spray into air intake for a few seconds then crank engine            
• Repeat if necessary       

Packaging

12 x 200ml

12 x 375ml

Wynn’s Exhaust Sealant provides an easy, permanent and gas tight seal of small to medium sized holes in the exhaust. The heat of the exhaust hardens the sealant to form a solid permanent fix.

• Seals small to medium sized holes
• Heat cures to create permanent seal
• Cost effective solution

Directions

• Clean surface of any dirt or oil
• Place Exhaust Sealer putty externally over the hole
• Allow to dry
• Start engine to supply heat for curing

Packaging

12 x 200g

Wynn’s Fresh Air Ultrasonic® is a neutral water based solution that eliminates the growth medium of microorganisms.

It removes greasy deposits, dust and other contamination from the air conditioning’s evaporator. The surfactants used are biodegradable and the efficiency of the product against bacteria and fungi has been tested to completely eliminate harmful micro-organisms associated with air-conditioner systems.

• Nebulized molecules pass through micro and pollen filters
• Eliminates all harmful micro-organisms
• 15 minute treatment

Applications

• Air conditioning systems in cars, trucks and buses
• A repeated treatment each year is recommended

Packaging

12 x 100ml

Wynn’s Grinding Paste is water based abrasive paste solution for asperity removal from metal surfaces. It is a dual package containing fine and coarse grit for professional results. Can be used to seat new valves, sharpen blades, remove score marks, lapping, tool making etc.

• Dual grit size package
• Provides lubrication while grinding
• Professional results in multiple application

Wynn’s Hammer Forged Exhaust Sealant moulds easily around exhaust joints to form a perfect seal. It is heat and vibration resistant and assists fitment by lubricating the flange before setting.

• Easy to mould into shape
• Seals exhaust joints gas tight
• Assists ease of fitment when joining an exhaust

Directions

• Apply to pipe before assembly
• Fit parts together
• Allow to set

Packaging

200g

Wynn’s Hot Wax Car Shampoo is a unique wax wash containing Carnuba wax which plates out on the paint to preserve polish and sealants. After washing you may rinse but not essential. Simply dry the car and buff windows and bright work.

• Carnuba wax shampoo
• Cleans shines and protects
• One cap treats 5L of hot or cold water

Applications

• Use on paint work between polishes to clean and protect from the elements

Directions

• Add 1 cap to 5L hot or cold water
• Lather and apply liberally onto paint and bright work
• Rinse off if desired
• Buff with soft dry cloth

Packaging

12 x 500ML

Wynn’s Leather Care Crème treats and protects leather and vinyl seats, jackets, lounge suites or any leather item requiring superior nourishment and care. It contains unique ingredients such as lanolin, jojoba oil, silicones, softeners, cleaning agents and a UV protector. Leather Care Crème will not stain clothing and will care for the finest leather.

• For all leather articles
• Cleans and nourishes
• UV protection

Wynn’s Nut Lock & Stud Lock are solvent free products that cure in the absence of air and in the presence of metal ions. Applications includes studs, nuts, screws and any threaded fasteners. The adhesive prevents loosening caused by vibration, mechanical and thermal shock. Resistant to petrol, diesel, transmission fluid, anti-freeze, and other chemicals. Wynn’s Nut Lock and Stud Lock also inhibit fretting corrosion and prevent seizure and galling. Nut Lock is a medium strength bond which requires 20Nm torque to loosen. Stud Lock has high bond strength for more permanent locking and requires 36Nm torque to loosen.

Packaging:      7g

                        4ml

Wynn’s Pearl Glaze is a premium non-abrasive cream polish for all paint finishes including high end metallic and clear coat paintwork.

Packaging: 250ml

• High quality finish
  • Non-abrasive
  • applies easily without leaving powder residue

Wynn’s Polywax combines the benefits of polymerised silicone paint sealant with Carnuba wax. It is mildly abrasive to assist in polishing out swirl marks and minor scratches. The Polymer sealant will last one year before re-application.

Packaging: 500ml

• Dual acting polymer sealant with Carnuba wax for added protection
• Removes swirl marks and minor scratches
• Lasts up to one year

Wynn’s Revive paintwork renewer, is a burnishing compound with abrasive particles which remove faded, discoloured paint and scratches. Revive removes years of grime and oxidation in minutes.

Packaging: 375ml

• abrasive polish to restore faded paintwork
• Removes stubborn dirt and scratches
• Not recommended for metallic finishes

Wynn’s Sensor Safe, High-Temp RTV is a one-component, room temperature vulcanizing gasketing compound with features of high stability and durability. Specifically designed to provide reliable formed-in-place gaskets for mechanical assemblies that withstand operating environments up to 3430C and resistant to engine oils, fuel and anti-freeze. This product is extensively used in bonding and sealing applications on automobile engines such as joint cover of tappet cover, intake exhaust manifolds, timing chain cover, oil sump, transmission pan, and household electrical appliances.

Packaging: 90ml

Wynn’s Nut Lock & Stud Lock are solvent free products that cure in the absence of air and in the presence of metal ions. Applications includes studs, nuts, screws and any threaded fasteners. The adhesive prevents loosening caused by vibration, mechanical and thermal shock. Resistant to petrol, diesel, transmission fluid, anti-freeze, and other chemicals. Wynn’s Nut Lock and Stud Lock also inhibit fretting corrosion and prevent seizure and galling. Nut Lock is a medium strength bond which requires 20Nm torque to loosen. Stud Lock has high bond strength for more permanent locking and requires 36Nm torque to loosen.

Packaging:      7g

                        50ml

Wynn’s Throttle Body and Air Intake Cleaner will remove sticky residue, caused by oil mist crankcase fumes, from air intake system components as well as petrol residues, gums and resins. These tar like deposits build up on the idle speed control and butterfly valves leading to irregular airflow and erratic idling. Formulated for modern petrol vehicles, will not remove protective surface coatings and is O2/ Lambda sensor safe

Packaging: 285g

• Removes sticky air intake build up
• Restores correct airflow to improve air/fuel mixture
• Cleans contaminated EGR & idle speed valves
• Restores smooth idling & throttle response