• Industrial-grade duct tape for splicing, masking, patching, sealing, and seaming
• High tensile strength for a secure hold under stress
• Thick rubber adhesive bonds to most rough and smooth surfaces for a tight seal
• Silver polyethylene surface resists wear, abrasion, and water
• Good choice for hanging polyethylene drapes for containment activities

Scotch® Rubber Splicing Tape 23 is a premium, highly conformable, self-amalgamating Ethylene Propylene Rubber (EPR), high voltage insulating tape. Scotch® Tape 23 has a liner that is easily removed as the tape is applied.

Scotch® Tape 23 is rated up to 90°C continuous operating temperature with a short term emergency operating temperature of 130°C, and can be used for low and high voltage (through 69 kV) applications.

Utilises an easy to remove liner that protects the tape until just before use

Self-fusing material creates a moisture tight seal

Dissipates heat well for stable, long lasting splices

Physical and electrical properties remain unaffected by degree of stretch

Suggested Applications

Primary electrical insulation for splicing all solid dielectric cables through 69 kV

Moisture sealing electrical connections

Jacketing on high voltage splices and terminations

Adhesive Material: Rubber Resin

Dielectric Strength: 31.5kV/mm

Elongation: 1000 Percent

Emergency Overload Temperature (Celsius): 130°C

Insulated: Yes

Length: 9.15 m

Maximum Operating Temperature (Celsius): 130 Degree Celsius

Operating Temperature (Celsius): Up to 90 °C

Self-Extinguishing: No

Self-Sticking/Amalgamating: Yes

Size (WxL): 19 mm x 9.15 m

Thickness: 0.76 mm

Suitable for High Voltage: Yes

Tape Colour: Black

Tape Grade: Professional

UV Resistant: No

Vulcanizing: Yes

Good flexibility

Moisture-tight electrical and mechanical protection

Operating Temperature:  between -18 ℃ and 105 ℃

Electrical isolation tape made out of rubber

1150 V/mil dielectric strength

Elongation at Break: 250%

Insulation Resistance: >10^6 megohms

Tensile Strength (metric): 26 N/cm

Total Tape Thickness without Liner (metric): 0.178 mm

Voltage Rating: 600 V

20m x 19mm