Interlocking Colour PVC Tiles

Entrace floor tile made from recycled materials

• An ideal low cost solution for refurbishing floor surfaces.
• Easy DIY installation - no adhesive required.
• Installation instructions provided.
• An ideal low cost solution for refurbishing floor surfaces. 
• This product may discolour and warp if laid in areas exposed to direct sunlight.

Material: Virgin PCV

Surface Finish: Medallion

Product Height: 4mm

Product Performance: High traffic / High load

Flame Retardency: Yes

Weight: 4.77kg / M2

Application: Factory, Warehouse, Gym, Garrage

Cleaning Method: Brush and mop on regular basis

Country of Origin: South Africa

Orthomat®

The original fatigue fighter

• Pebbled ‘textured’ surface
• Available as Orthomat® Safety with bright yellow bevelled edge borders.
• Conforms to Slip Resistance Test EN13552 (Category R10).
• Fire tested to DIN54332 (B2) part of DIN4102.

Material: Virgin Closed Cell PVC (Foam)

Surface Finish: Pebble

Product Height: 9mm

Roll Length: 18.3m

Size of Safety Border: 100mm

Operating Temperature: 0°C to +60°C

Environmental Resistance: Suitable for dry indoor environments

Typical Applications: Production lines, assembly areas, packing stations, workbenches

Installation Method: Loose lay

Cleaning Method: Brush/Mop the top surface

Product Performance: Conforms to Slip Resistance Test EN 13552 (Category R10).

Flame Retardancy: Fire Tested to DIN 54332 (B2) part of DIN 4102.

Bubblemat

Hard wearing rubber mat

• Hard wearing rubber mat.
• Raised surface stimulates blood circulation on foot movement.
• Safety bevelled edging as standard.

Material: (100% natural rubber) and other approved rubber chemicals used in rubber industry.

Surface Finish: Bubble shaped

Product Height: 14mm

Operating Temperature: -30°C to +50°

Resistant to Chemicals: Resistant to water and most mild acids

Environmental Resistance: Use predominantly in dry areas

Typical Applications: Ideal for manufacturing production areas where employees are standing in static positions

Installation Method: Loose Lay

Cleaning Method: Use a high pressure hose (not exceeding 60psi) to remove the dirt and debris on the mats. For best results use a mild detergent (pH 4.0-9.0) to clean the mats. Do not use steam or degreasers or caustic chemicals. Do not mechanically scrub the mats.

Product Performance: 30 BPN, According to ASTM E304

Rampmat

An economical anti-fatigue mat

• An economical anti-fatigue mat for the workplace.
• Raised circular surface for superior slip resistance.
• Conforms to Slip Resistance Test EN 13552 Category R10.
• Open drainage holes for spilt liquids.
• Made from hardwearing NBR rubber
• Moulded bevelled edges reduce trip hazards.

Material: NBR rubber

Surface Finish: Raised circular surface

Product Height: 10mm

Operating Temperature: -20°C to +130°C

Installation Method: Loose lay

Cleaning Method: Roll up the mat to clean the floor and wash the mat with water.

Notes: Silicone is used in the production process of the mats and a residue will possibly be left on the mat

GripSafe

Anti-slip, protective liner

• Ideal non-slip liner for shelves and trays.
• Cushions and protects components.
• Easy to cut and trim to shape.
• Manufactured from PVC foam.
• Machine washable.
• Ideal non-slip liner for bars, shelves and trays.

Material: PVC foam

Product Height: 4mm

Typical Applications: Ideal non-slip liner for benches and drawers.

Installation Method: Loose lay

Cleaning Method: Machine washable.

Gripfoot

Grit Tape, Cleats and Tiles for Slip-Resistance

• Abrasive grit ‘anti-slip’ products with self-adhesive backing available in tapes, cleats and tiles.
• Provides additional grip underfoot on smooth surfaces.
• Hardwearing and easy to install.
• Gripfoot Tape – versatile for floor surfaces, machinery and vehicles
• Gripfoot Cleats (rectangular) are designed for use on steps and stairs.
• Gripfoot Tiles (square) are ideal for increasing safety on smooth, tiled floors.
• Conforms to Slip Resistance Test EN 13552 Category R13

Material: Abrasive grit consisting of aluminium oxide bonded to a polymer substrate. Solvent based acrylic emulsion adhesive backing. Product supplied with a moisture resistant release liner

Surface Finish: Grit

Operating Temperature: -10°c to +60°c

Resistant to Chemicals: N/A

Environmental Resistance: Suitable for indoor environments

UV Resistance: Yes

Typical Applications: Suitable for stairs, ladders, ramps, walkways and vehicles

Installation Method: Pressure sensitive self-adhesive tape

Product Performance: Conforms to Slip Resistance Test EN 13552 Category R13

Adhesion Strength: 2.5Kg/1”

Coating Thickness: 0.05mm

Solvent Residue: 0.005

Release Force: 13Kg/m2

Bakkie Mats

Hardwearing mats made from recycled tyres

• Durable and slide resistant.
• Flexible and double up as sand tracks when your wheels get stuck.
• Manufactured from recycled tyres.
• Protect your bakkie against scratches and dents.
• Aerated designs prevent water build-up, so no rust.
• Absorbs any heavy loads and spreads the weight evenly.
• Mats stay put when you unload.

Material: Rubber, Elastomer/Polyester

Surface Finish: Rubber

Product Height: 16mm - 20mm 

Durability: Heavy duty/traffic

Flame Propagation Test: BS EN 12281-1:2014 Average temperature rise not exceeding (*C) maximum 140*C

Product Performance: Hardness Shore A: 65

Pile Weight: 11-13 kg/m2

Colour: Black

Quality System: ISO 9001:2008

Cleaning Method: Brush or hose down on regular basis

• Easy to handle & clean
• Re-usable
• Environmentally neutral
• UV protected
• Proudly made in SA
• Reduces the breeding of flies & cuts their life cycle
• Can be mounted on a pole or wall, or can be installed hanging – the trap should not be mounted / installed higher than 1.2m from the ground. Place on the ground for the best performance.
• Flies are attracted to the odour of the bait
• Flies enter the trap through the rectangular holes between the bait bowl & the drying chamber
• Instead of exiting through the entry holes, they fly towards the light which enters in from the clear lid & get trapped in the drying chamber
• Once in the drying chamber they dry out
• To remove flies simply remove the bait bowl, lift off the clear lid & shake out the dead flies

Step 1: Catch the flies flying about

Step 2: Our trap dries them out

Step 3: Lift the lid to empty them out

Step 4: Repeat

Our bait is specially designed to attract flies as efficiently & quickly as possible, this helps stop breeding in its tracks, which in turn resulting in less annoying flies around during the next season

Must be mixed with warm water to activate

Bait is non-toxic & pesticide free

Content: 1 x Litre Mixing Bottle, 5 x 45g Sachet of fly bait (5 months’ worth/20 doses), 1 x Plastic gloves