Bubblemat

Hard wearing rubber mat

• Hard wearing rubber mat.
• Raised surface stimulates blood circulation on foot movement.
• Safety bevelled edging as standard.

Material: (100% natural rubber) and other approved rubber chemicals used in rubber industry.

Surface Finish: Bubble shaped

Product Height: 14mm

Operating Temperature: -30°C to +50°

Resistant to Chemicals: Resistant to water and most mild acids

Environmental Resistance: Use predominantly in dry areas

Typical Applications: Ideal for manufacturing production areas where employees are standing in static positions

Installation Method: Loose Lay

Cleaning Method: Use a high pressure hose (not exceeding 60psi) to remove the dirt and debris on the mats. For best results use a mild detergent (pH 4.0-9.0) to clean the mats. Do not use steam or degreasers or caustic chemicals. Do not mechanically scrub the mats.

Product Performance: 30 BPN, According to ASTM E304

GripSafe

Anti-slip, protective liner

• Ideal non-slip liner for shelves and trays.
• Cushions and protects components.
• Easy to cut and trim to shape.
• Manufactured from PVC foam.
• Machine washable.
• Ideal non-slip liner for bars, shelves and trays.

Material: PVC foam

Product Height: 4mm

Typical Applications: Ideal non-slip liner for benches and drawers.

Installation Method: Loose lay

Cleaning Method: Machine washable.

Knee-Saver

Take the strain out of kneeling

• The ideal pad for all those uncomfortable kneeling jobs.
• Reduces knee pain and lower back stress caused by regular kneeling.
• Lightweight to carry - only 0.35kg per pad - with carrier handle.
• Resistant to oils and chemicals.
• Manufactured from closed cell PVC/nitrile blend foam. 

Material: NBR Foam

Height: 25mm

Orthomat®

The original fatigue fighter

• Pebbled ‘textured’ surface
• Available as Orthomat® Safety with bright yellow bevelled edge borders.
• Conforms to Slip Resistance Test EN13552 (Category R10).
• Fire tested to DIN54332 (B2) part of DIN4102.

Material: Virgin Closed Cell PVC (Foam)

Surface Finish: Pebble

Product Height: 9mm

Roll Length: 18.3m

Size of Safety Border: 100mm

Operating Temperature: 0°C to +60°C

Environmental Resistance: Suitable for dry indoor environments

Typical Applications: Production lines, assembly areas, packing stations, workbenches

Installation Method: Loose lay

Cleaning Method: Brush/Mop the top surface

Product Performance: Conforms to Slip Resistance Test EN 13552 (Category R10).

Flame Retardancy: Fire Tested to DIN 54332 (B2) part of DIN 4102.

Rampmat

An economical anti-fatigue mat

• An economical anti-fatigue mat for the workplace.
• Raised circular surface for superior slip resistance.
• Conforms to Slip Resistance Test EN 13552 Category R10.
• Open drainage holes for spilt liquids.
• Made from hardwearing NBR rubber
• Moulded bevelled edges reduce trip hazards.

Material: NBR rubber

Surface Finish: Raised circular surface

Product Height: 10mm

Operating Temperature: -20°C to +130°C

Installation Method: Loose lay

Cleaning Method: Roll up the mat to clean the floor and wash the mat with water.

Notes: Silicone is used in the production process of the mats and a residue will possibly be left on the mat

Rampmat

An economical anti-fatigue mat

• An economical anti-fatigue mat for the workplace.
• Raised circular surface for superior slip resistance.
• Conforms to Slip Resistance Test EN 13552 Category R10.
• Open drainage holes for spilt liquids.
• Made from hardwearing NBR rubber
• Moulded bevelled edges reduce trip hazards.

Material: NBR rubber

Surface Finish: Raised circular surface

Product Height: 10mm

Operating Temperature: -20°C to +130°C

Installation Method: Loose lay

Cleaning Method: Roll up the mat to clean the floor and wash the mat with water.

Notes: Silicone is used in the production process of the mats and a residue will possibly be left on the mat

Ringmat

Extremely tough rubber matting

• Rubber matting for general industrial use.
• Conforms to Slip Resistance Test EN 13552 Category R10.
• Open holes allow grass to grow through.
• Connectors available to link matting for larger areas.

Material: SBR/NBR rubber

Surface Finish: Honeycomb pattern surface with holes

Product Height: 23mm

Operating Temperature: -20°C to +160°C

Environmental Resistance: Ideal for both indoor and outdoor applications

UV Resistance: Yes

Installation Method: Loose lay

Product Performance: Conforms to Slip Resistance Test EN 13552 Category R10

Cleaning Method: Wet/Dry vacuum or simply wash down with hose

Product Capacity: 150kg/h

Saw Speed: 190r/min

Motor Power: 800W (1HP)

Voltage: 110/220 V

Machine Size: 390*225*415mm

Carton Size: 455*305*395mm

N. T: 26KGS

G. W: 28kgs

Power: 800W (1HP)

Throat: 254mm

Cutting capacity: 240mm

Blade length: 2,085mm

Table size: 600 x 470mm

Motor: 550W

Weight: 55kgs

Size of saw blade: 2085x15x0.5mm