Extended test mode: Tests can be conducted on a wide variety of batteries, including 12 V and 24 V starter and charging system

Even more accurate tests results due to optimal amp clamp upgrade

Test algorithms are optimised, allowing for new batteries or never installed batteries to be tested.

Load-free test procedure: Produces fast, precise and reliable measurement results

Large LCD screen

Integrated printer for immediate, clear and easy to understand graphical printouts

Can store up to 100 test reports to maintain history of service records for future communication with customers

Keep software up-to-date trough USB port

Connection cable is 3 m long, to allow for maximum coverage around the vehicle

Only weighs 700 g to enable one hand use

Battery nominal voltage: 6 V / 12 V

Application: Passenger Car / commercial vehicle, motorcycle, marine

Battery types: Lead-acid, gel & AGM

Test standards: JIS, EN, DIN, SAE, IEC, EN2

Battery size (in acc. with CCA): 100 - 2000 A

Starting/charging system test: 12 V / 24 V

Menu languages: 21

Dimensions (W x H x D): approx. 270 x 113 x 50 mm

Weight approx.: 700 g

Operating temperature: 0 °C - 40 °C

• Test battery CCA, voltage, internal resistance, health and charge
• Test cranking and charging(alternator) systems
• Review history record
• Display test result: good battery, good battery & recharger, charge &retest, replace, bad cell & replace
• Support all battery standards, like JIS, DIN, IEC, EN, SAE, CA, CCA, GB, BCI, MCA
• Protection of short circuit and reverse connection
• All results can be shared and printed out
• Waterproof IP65
• Portable small size, easy to carry
• Fireproof shell and wire

Before use it is necessary to upload the APP to your phone either iPhone or Android as below:
1. iPhone – BT1000, App store
2. Android- BT1000, Google Play

• Bluetooth name: BT1000
• No password, automatically connect.

Download The Manual Here

Bluetooth name: BT1000
No password, automatically connect.
Operating Temperature: -15 to 100 Degrees Celsius
Plastic: Automotive Grade
Physical Dimensions: 54 x 35 x 10 mm

• Work on 12V vehicle and motorcycle batteries
• Test battery & charging/starting systems
• The latest testing result save automatically and reviewed
• Print function via PC printer
• One-click function key -shortcut for 2 quick function including voltmeter and quick test
• Test battery CCA, voltage, internal resistance, health and charge
• Protection of short circuit and reverse connection

• Test battery & charging/starting systems
• The latest testing results save automatically and reviewed
• Adjustable date/time, printing mode
• Print via built-in printer
• One-click function key --> shortcut for 2 quick function including voltmeter and quick test
• Test battery CCA, voltage, internal resistance, health and charge
• Display test result: good battery, good battery & recharge, charge & retest, replace, bad cell & replace
• Protection of short circuit and reverse connection

Use

Well suited for battery sizes up to approximately 500Ah. It can maintenance charge batteries indefinitely and handle parallel consumption up to 30A while charging. The charging voltage is temperature compensated with an external sensor.

14,7 V

Some batteries require a higher charging voltage than others (this is described son the battery). Press the 14.7V button, and the initial charging voltage will be 0.3V above than the standard level.

Power supply mode

When you need continuous current and stable voltage during ECU programming or battery replacement, you can use our workshop chargers as a power supply. Activate Powersupply-mode by holding the “ON” button until the display begins to light up in sequence.