• This low-profile flat deck Slimsport rack has a load-carrying area of 1468mm (57.8") x 1233mm (48.5").
• The sleek side rails have integrated mounting feet. The mounting feet also have additional brace brackets for added strength.
• The high-strength aluminum slats have T-slots suitable for all Front Runner top mount accessories (not included).
• The included standard full fairing with rubber edge trim, makes the rack ultra-quiet.
• Fitment guide and all mounting hardware included.
• 6"/T30 Torx Allen Key for Slimsport Rack is required for installation.
• Note: Drilling required.
• Note: Under Rack Tables and some side mount accessories such as Hi-Lift Jack Bracket and Recovery Device & Gear Holding Side Brackets are not compatible with the Slimsport Tray range.

KSFR007T - Ford Ranger T6.2 Wildtrak/Raptor Double Cab (2022-Current) Slimsport Roof Rack Kit 

Consisting of:
1x KSFR005 - Ford Ranger T6 Double Cab (22-Curr)Slimsport Roof Rack Kit
1x RRAC251 - Ford Ranger T6 Dbl Cab(22-Curr)SlimSport Wind Fairing
1x RRAC971 - Protection Strip

Material Used:
Black epoxy powder - coated T6 aluminium
High strength steel

Assembled Tray Dimensions:
1468mm (57.8") L x 1233mm (48.5") W x 139mm (5.5") H

Approximate Installed Weight: 27.86kg (61.42lbs)

The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.

To determine the approximate height from your vehicle’s roof to the top of your Slimsport Rack add 60mm-70mm (2.4"-2.8") to the highest point of your roof.

Set of 2

• This 1358mm/53.5” long, full-size Slimline II Cargo Roof Rack kit contains the Slimline II Tray, Wind Deflector and two (2) Foot Rails to mount the Slimline II Tray.
• All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle-specific foot rails have openings for storing compatible gear under the rack, such as Front Runner tables.
• Foot Rails allow access to Tables that mount under the rack (1 smaller Pro Stainless Steel Prep Table Kit or 1 larger Pro Stainless Steel Camp Table Kit).
• Drilling is not required for WildTrak models. For non WildTrak models, drilling into the plastic trim is required for installation.

RFR015T - Ford Ranger T6.2 Wildtrak/Raptor Double Cab (2022-Current) Slimline II Roof Rack Kit

Consisting of:
1x FAFR008 - Ford Ranger T6 DC (2022-Curr) Foot Rails
1x RRSTD07 - SLII Tray - 1255mm(W)X1358mm(L)

Material Used:
Black epoxy powder - coated T6 aluminium
High strength steel

Approximate Installed Weight: 30.221kg (66.63lbs)

The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.

To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.

If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.

If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.

Front Runner Slimline II 3/4 Roof Rack Kit – Toyota Land Cruiser 79 DC

The Front Runner Slimline II 3/4 Roof Rack Kit is the perfect cargo solution for the Toyota Land Cruiser 79 Pick-Up, offering ample storage space while maintaining a sleek, low-profile design. This 954mm long roof rack provides all the functionality of the full-size version in a more compact size – ideal for carrying gear without compromising your vehicle's look or performance.

Ideal for both off-road adventures and everyday use, this roof rack provides the perfect balance of size, weight, and durability. Whether you're heading out on a camping trip or need extra storage for work equipment, the Front Runner Slimline II 3/4 Roof Rack Kit is built to handle your journey.

• Compact Size, Easy Installation, No Drilling Required, Modular & Versatile

Maximize your vehicle's storage capabilities with the Front Runner Slimline II 3/4 Roof Rack Kit – the ultimate cargo solution for the Toyota Land Cruiser 79 DC Pick-Up.

Key Features

Custom Fit for Toyota Land Cruiser 79 DC
Designed to fit the Land Cruiser 79 Double Cab Pick-Up with no drilling required for installation.

Durable Materials
Constructed from black epoxy powder-coated T6 aluminium and high-strength steel for maximum durability and corrosion resistance.

Easy Installation
Comes with 4 Gutter Mount Legs that fit directly onto your vehicle’s rain gutters, making installation quick and hassle-free.

Lightweight & Strong
Weighing only 20kg (45lbs), this rack offers exceptional strength without adding unnecessary weight to your vehicle.

Modular Design
The t-slots on the tray slats and edges accommodate standard 8mm bolts, making it easy to attach accessories like bike mounts, jerry can holders, or rooftop tents.

• Material: Black epoxy powder-coated T6 aluminium & high-strength steel
• Tray Dimensions: 1425mm (W) x 964mm (L)
• Installed Weight: 20kg (45lbs)

• The use of magnet handle simplify the process to use it
• The weight is only half of traditional solar panel
• Better protection comparing to other light products
• Flexible cover to better protect the panel
• Durable carry/storage bag included

200W Solar Panel

The SnoMaster 200W Solar Panel Kit contains everything you need to harness the power of the sun and recharge your batteries. Complete with a high-tech regulator, cables and carry bag, this lightweight and compact solar kit will keep the camp lights on and the beers frosty.

Features:

• Lightweight
• Weatherproof
• Multi-Use Controller
• Polyester Carry Case
• Compact Folding Solar Panel Solution
• Micro Control Unit: Pulse Width Modulation

Specifications:

• Folded (mm): (W) 420 (L) 380 (H) 150
• Unfolded (mm): (W) 815 (L) 1870 (H) -
• Net Weight: 9.1Kg (Incl. Accessories)
• Cell Efficiency: 19.5%
• Maximum Power (Pm): 200W
• Current at Max. Power (Imp): 11.37A
• Voltage at Max. Power (Vmp): 17.6V
• Output Connection: 50A Anderson Style
• Cell encapsulation: PET Lamination Polyester
• Bag Material: 900D
• Cell Type: MonCrystalline

What's in the box:

• 1 x Foldable Solar Panel
• 1 x Carry Bag
• 1 x Controller
• 1 x Support Stand
• 1 x Input Lead 30A Anderson
• 2 x Output Lead 30A Anderson Style Plugs

CS Portable Solar Charger Blanket 135W SPB Series, is one of the most powerful foldable solar panels currently available. Engineered with convenience and practicability in mind. When you’re enjoying the outdoors, you can also enjoy clean and free solar energy by placing our SPB135 solar panel under direct sunlight. Perfect for the Outdoor Life such as camping, hiking and picnics.

Foldable and portable design

Adjustable stand

Suitable for all kinds of energy storage

Crack resistance

Light weight

Power Voltage: 3x45W (135W)

Open-circuit Voltage (Voc): 26.27V

Voltage at Pmax (Vmp): 22.32V

Short-circuit current (Isc): 6.41A

Current at Pmax (Imp): 6.05A

Cells Efficiency: 24.40%

Surface Material: ETFE

Weight: 3.9kg

Dimensions Unfolded: 525x560x4

Dimensions Folded: 560x440x20

Water resistant

Output power up to 3.5 W

Fossil-fuel free solar PV

Sustainable, affordable and durable

Uses sun power to charge your portable devices, such as your phone or fan - can charge any 5v USB device

Portable and lightweight

Durable materials and reusable components

Solar Module: 7V, 700mA, Polycristalline

Output: USB-A Female, 5V, 0.7A (1A max)

Charging Cable: 1m Cable

Ingress Protection: IP20

Dimensions: 255 × 195 × 18 mm

Weight with Cable: 210 g

Certifications: CE

Charging time: clear sky 5 h, partial cloudy 8 h, cloudy 16 h

Experience exceptional energy storage and reliability with the First Battery FB-2560S Pro — a high-capacity 12.8V 200Ah Lithium-ION battery designed for heavy-duty solar and backup power systems. Built for consistent performance, this battery offers long-lasting power, efficiency, and easy integration into various energy applications.

Features and Benefits:
• Voltage: 12.8V and 200Ah amp-hour rating for powerful, long-lasting performance.
• Compact yet robust design (360mm x 260mm x 250mm, 23.3kg) for easy installation.
• Supports up to 4 batteries in parallel or series connection for scalable energy solutions.
• Maintenance-free Lithium-ION technology ensures stable output and extended service life.
• Operates effectively across a wide temperature range – charging (0°C to 50°C) and discharging (-10°C to 50°C).
• Ideal for large-scale solar, hybrid, and backup power systems requiring dependable energy supply.
• Suitable for commercial, industrial, and off-grid applications including data centres, renewable energy setups, and critical equipment.

• Type: Lithium-ION battery
• Model: FB-2560S Pro
• Voltage: 12.8V
• Capacity: 200Ah / 2560Wh
• Dimensions: 360mm (L) × 260mm (W) × 250mm (H)
• Weight: 23.3kg
• Operating Temperature: Charging 0°C – 50°C / Discharging -10°C – 50°C
• Configuration: Supports parallel and series connections (x4)
• Applications: Solar power systems, hybrid energy systems, backup power for industrial and commercial use

Power your adventures with the Enertec 12.8V 100Ah LiFePO₄ Blade Battery — a high-performance, lightweight energy solution offering superior cycle life, safety, and reliability. Perfect for marine, solar, and leisure applications, this modular battery delivers long-lasting efficiency in a compact, durable design.

Features and Benefits:
• 20x longer cycle life and 5x longer float/calendar life than standard lead-acid batteries.
• Lightweight and compact with high energy density for efficient power delivery.
• Operates across a wide temperature range of -20°C to 60°C for versatile use.
• Modular design allows up to six batteries to be connected in parallel for expanded capacity.
• Provides stable voltage output and excellent safety performance with Lithium Iron Phosphate (LiFePO₄) chemistry.
• Ideal for marine, solar, camping, and off-grid leisure power systems.

• Voltage: 12.8V
• Capacity: 100Ah
• Chemistry: Lithium Iron Phosphate (LiFePO₄)
• Cycle Life: Up to 20x longer than lead-acid batteries
• Parallel Connection: Up to 6 batteries
• Dimensions: 520mm (L) × 316mm (W) × 60mm (H)
• Weight: 15kg
• Terminal Type: M8
• Operating Temperature: -20°C to 60°C
• Application: Marine, solar, and leisure power systems