8268 Results

Per Page
    • In Stock

    • Fit a bottle opener to your rack for whenever you need to crack open a cool one.

      Black powder coated stainless steel for protection against the elements.

      Can be installed on the left or right side of the Front Runner Slimsport Rack by sliding the opener into any slat and fastening the bolt.

      Can be installed anywhere along the sides of the Front Runner Slimline II Roof Rack Tray by sliding the opener into the T-slot and fastening the bolt.

    • Consists of:

      • 1 x Bottle Opener
      • Installation Hardware
      • Fitting Instructions

      Materials used: Black powder coated steel

      Product Dimensions: 60mm (2.4") L x 45mm (1.8") W x 40mm (1.6") H

      Weight: 91g (3.2oz)

    • N$87.00

    • Bottle Opener Rack Mounted

    • Never be stuck in the wild without a bottle opener again. This bottle opener attaches to either side of a Front Runner Roof Rack, so where your rack goes, your bottle opener does too.
    • Code: 9131010001
    • In Stock
      • Split Shot Crimper securely attaches split shot
      • Lure Tunnin Tool Tune lures back to their “out-of-the-box” action
      • Side cutter perfect to cut thin leaders and more
      • Soft Grip Handles allows a firm grip on the tool, even when wet
    • N$247.00

    • Tools Longnose Pliers Offset

    • Code: 9118951040
    • In Stock

    • Suitable for use with 0.15 – 0.47mm monofilament / 0.3 – 0.8mm braid

      Uses 2x AA batteries (not included)

    • N$277.00

    • Tool Line Stripper

    • Code: 9118951046
    • In Stock
      • Drop forged high carbon steel, hardened and tempered for durability
      • 4 crimp sizes to meet different crimping demands
      • Special two side cutters
      • Ratchet hinged locking device
      • Comfortable nonslip grips
      • Size: 10”
    • N$336.00

    • Tool Crimping

    • Code: 9118951047
    • Out of Stock Online

    • The Can Crusher is a space-saving solution for your waste and it can be used as a nifty party-trick.

      The Can Crusher can mount easily to a molle plate or anywhere else you’d like to use it, for example, the bar wall.  This can crusher reduces aluminium 500ml cans by 80% of their size. This can crusher crushes most beverage cans (not food cans), as it is designed for aluminium cans.

      • An integrated bottle opener
      • Two hooks to hang a waste bag underneath
      • Supplied with mounting hardware
      • Weight: 1.8kg
      • Size: 38 (L) x 11.5 (W) x 8.5 (H) cm
    • N$1,806.00

    • Can Crusher

    • Code: 9131010045
    • In Stock

    • The Alu-Cab Shower Cube is a modular and universal accessory, designed to interface with all existing Alu-Cab base unit platforms. There are brackets available separately for: Generation 3.1 Tent, Generation 3.R Tent, the Canopy Camper, the Khaya, our Roof Conversions as well as most popular roof racks.

      The shower cube can be used as a shower or simply as a privacy cube. Being very quick to open and assemble, the shower cube is a quick change or shower just minutes away.

      The main box once open, acts as a shelf, allowing you to place your shower necessities inside (remember to remove before closing the cubicle).

      • Light-weight aluminium construction
      • Easy to open and close
      • Arms lock into place, ensuring the cubicle is secure
      • Quick drying taffeta shower curtain, weighted at the bottom to retain shape
      • A separate roof flap that can be deployed to keep warm air in
      • An added zip to allow access to the vehicle door/window
      • Heavy duty zipped storage bag
      • Double access point (two zips) – Enables one to mount to lefthand or righthand side of your vehicle.
      • Adjustable tent peg straps, to accommodate vehicles with differing ride heights.
      • Size open: 109.6 (L) x 92.9 (W) x 191.7 (H) cm
      • Size closed: 105.5 x (L) x 11.9 (W) x 18.7 (H) cm
      • Mass: 9 kg
    • N$8,049.00

    • Shower Cube Side Mount

    • Code: 9131010048
    • Out of Stock Online
      • Compact and lightweight
      • Invert base technology
      • Industrial quality in convenient 220V single phase
      • For welding carbon and stainless steel as well as aluminium
      • High 60% Duty Cycle
      • Wire diameters from 0.8mm to 1.0mm
      • Accessories included
    • Input Power Voltage Single Phase AC 220V ⩲ 15%
      Rated Input Power Capacity 7.1 KVA
      No Load Voltage 42V
      Output Current Range 50 - 250A
      Rated Output Voltage 22.5
      Duty Cycle % 60%
      Weight 25Kg

       

    • N$19,190.00

    • Welder Inverter MIG 250A 220V

    • Code: 9130514082
    • In Stock

    • MAT9100 Multi-Process Welder – Perfect for DIY Enthusiasts and Hobbyists

      The MAT9100 is a versatile entry-level multi-process welder designed for those who enjoy DIY projects or hobby welding. Combining MIG, MMA stick welding, and TIG capabilities, this welder is lightweight, easy to use, and offers reliable performance for various applications.

      Key Features:

      • Multi-Process Welding: Supports MIG, MMA, and TIG welding processes.
      • Convenient Power Supply: Operates on a standard 220V input.
      • Versatile Compatibility: Welds with gasless flux-cored wire and includes a 5kg MIG wire spool.
      • Lightweight Design: Weighs only 15.6kg for portability and ease of handling.
      • Included Accessories: MIG torch and cable kit (argon flow meter sold separately).

      The MAT9100 Multi-Process Welder is a practical and efficient tool for a wide range of welding tasks. Whether you're working with MIG, MMA, or TIG, this lightweight and user-friendly machine is an excellent choice for any DIY enthusiast or hobbyist. Note: Argon flow meter (MAT3345EN) sold separately.

    • Input Voltage: 220V

      Duty Cycle: 20%

      MIG Welding Current: 30 – 180A

      MMA (Stick) Current: 180A

      Weight: 15.6kg

      Dimensions (L x W x H): 554 x 242 x 436mm

    • N$8,625.00

    • Welder Inverter Extreme Mig

    • Code: 9130514085
To top