16339 Results

Per Page
    • Out of Stock Online
    • N$66.00
    • SAE 30

    • Code: 9107762005
    • Out of Stock Online
    • N$488.00
    • SAE 30

    • Code: 9107762105
    • In Stock
    • Blixen Food Grade Degreaser is a specially formulated biodegradable degreaser that is safe for food processing plants and environmentally sensitive areas.  It is an eco-friendly degreaser that can remove oils, grease, and fat residues. It cuts time and costs from your most difficult cleaning applications and is safe for ferrous and nonferrous metals. It is readily biodegradable, non-flammable, nonabrasive, non-corrosive and nontoxic making if safe for use in many applications.

       

      Outstanding properties: 

      • Cleans without hard scrubbing.
      • Will not attack seals and rubbers.
      • Economical and biodegradable.
      • No flash point thus safe to use.
      • Environmentally friendly. 

       

      Directions for use:

      • Spray on the soiled surface and let soak for a while.
      • Brush off or apply a jet spray.
      • Heavily soiled components should be soaked for a while to ensure complete dirt removal.
      • Using a brush and applying water as recommended on the label, dirty greasy/oily floors and machinery are cleaned with ease.

       

      Applications:

      • Food processing plants
      • Environmentally sensitive areas
      • Household
      • Restaurants & cafes
      • Food preparation areas
    • N$59.00
    • KITCHEN CLEANER & DEGREASER

    • Code: 9107780007
    • In Stock
    • N$66.00
    • Blixem 1L

    • Code: 9107800001
    • In Stock
    • N$199.00
    • Blixem 5L

    • Code: 9107800105
    • In Stock
      • 28-piece impact-rated set in a dedicated S-CASE storage box
      • 15 x 25 mm bits with C 6.3 shank: PH1, 2x PH2, 2x PZ2, 2x T20, T25, T30, T40, SL5
      • 9 x 50 mm bits with E 6.3 shank: 2x PH2, 2x PZ2, 2x T15, 2x T20, T25
      • All bits made from S2 steel with a manganese phosphate coating for corrosion protection
      • 3 impact sockets (6, 8 and 10 mm) in manganese-phosphated chrome vanadium steel
      • 60 mm magnetic impact bit holder with stainless steel sleeve and carbon steel E 6.3 shank
      • Interchangeable box inserts, transparent lid and Auto-Lock clip closure
      • Suits common chucks and bit holders in drills and (impact) cordless screwdrivers of any brand
    • Article number49108703
      EAN4009311087034
      Number of pieces28
      25 mm bits (C 6.3 shank)15: PH1, 2x PH2, 2x PZ2, 2x T20, T25, T30, T40, SL5
      50 mm bits (E 6.3 shank)9: 2x PH2, 2x PZ2, 2x T15, 2x T20, T25
      Bit materialS2 steel, manganese phosphate coated
      Sockets3: 6, 8, 10 mm
      Socket materialChrome vanadium, manganese phosphated
      Bit holder60 mm, magnetic, stainless steel sleeve, carbon steel E 6.3 shank
      Impact ratedYes
      CaseInterchangeable inserts, transparent lid, Auto-Lock clip closure
    • N$374.00
    • Einhell S-CASE 28-Piece Impact Bit Set

    • Impact-rated 28-piece bit set with 24 S2 steel bits in 25 and 50 mm, three 6/8/10 mm sockets and a 60 mm magnetic bit holder, stored in a sturdy case with a clear lid.
    • Code: 9108001005
    • In Stock
      • 32 bits, 50 mm long, with E 6.3 shank
      • Bits made of grey sandblasted S2 steel with a red coloured ring
      • 60 mm quick-change bit holder with metal sleeve and strong magnet
      • Bit holder made of carbon steel with E 6.3 shank
      • Torx, hex, Pozidriv, Phillips, spanner, Tri-Wing, Torq-Set and slotted drives
      • Storage box with transparent lid to see the contents at a glance
      • Robust auto-lock clip closure prevents accidental opening
      • Suits common drill chucks and bit holders in cordless screwdrivers and drills
    • Item number49118903
      EAN4009311189035
      Number of pieces33
      Bits32
      Bit length50 mm
      Bit shankE 6.3
      Bit materialGrey sandblasted S2 steel
      DrivesTT8, TT10, TT15, TT20, TT25, TT27, TT30, TT35, TT40, BH2, BH2.5, BH3, BH4, BH5, BH6, PZ1, PZ2, PZ3, PH1, PH2, SP4, SP6, SP8, SP10, TW1, TW2, TW3, TW4, TQ6, TQ8, TQ10, SL6
      Bit holder1x quick-change, 60 mm, metal sleeve, magnetic
      Bit holder shankE 6.3
      Bit holder materialCarbon steel
      StorageBox with transparent lid and auto-lock clip closure
    • N$374.00
    • Einhell M-CASE 33-Piece Bit Set, 50 mm

    • A 33-piece Einhell bit set with 32 sandblasted S2 steel 50 mm bits in many drive types and a magnetic quick-change holder, stored in a clear-lid case with auto-lock clip.
    • Code: 9108001010
    • In Stock
      • 16 impact-resistant 25 mm bits with C 6.3 shank
      • 8 impact-resistant 50 mm bits with E 6.3 shank
      • Bits made of manganese-phosphated S2 steel
      • 8 masonry drill bits (3–10 mm) with carbide insert and E 6.3 shank
      • 60 mm impact-resistant magnetic bit holder with stainless steel sleeve
      • Storage box with auto-lock clip closure and transparent lid
      • Suitable for (impact) cordless screwdrivers and drills of any brand
    • Item number49108753
      EAN4009311087539
      Number of pieces33
      25 mm bits (C 6.3 shank)16 – PH1, PH2, PZ1, PZ2, PZ3, T10, T15, T20, T25, T27, 2x T30, T40, SL5, H4, H5
      50 mm bits (E 6.3 shank)8 – PH2, PZ2, 2x T15, 2x T20, 2x T25
      Bit materialManganese-phosphated S2 steel
      Masonry drill bits8 – 3, 4, 5, 6, 7, 8, 9, 10 mm, E 6.3 shank
      Masonry drill bit materialRoll-rolled tool steel to DIN 10083-2 with carbide insert
      Bit holder1x 60 mm, magnetic, stainless steel sleeve, E 6.3 carbon steel shank
      StorageBox with auto-lock clip closure and transparent lid
      Compatibility(Impact) cordless screwdrivers and drills
    • N$510.00
    • Einhell M-CASE 33-Piece Impact Bit & Masonry Drill Bit Set

    • 33-piece Einhell M-CASE set with 24 impact-resistant S2 steel bits, eight 3–10 mm carbide masonry drill bits and a magnetic bit holder, stored in a clip-lock case.
    • Code: 9108001200
    • In Stock
      • 40-piece set for screwdriving, drilling and fastening
      • 16 x 25 mm S2 steel bits with C 6.3 shank (PH1-3, PZ1-3, H3, H4, T10-T40, SL5)
      • 60 mm quick-change magnetic bit holder with E 6.3 shank and metal sleeve
      • 5 x 1/4" drive CV steel sockets (5, 6, 8, 10, 13 mm)
      • 12 mm countersink with E 6.3 shank
      • 8 x roll-forged HSS metal drills with 135° split point (2 each of 3, 4, 5, 6 mm)
      • 4 x wood drills with centring point (4, 5, 6, 8 mm)
      • 5 x carbide-tipped masonry drills (3-8 mm) for brick, stone and concrete
      • Storage case with auto-lock clip closure and transparent lid
      • Fits standard chucks and bit holders on most cordless screwdrivers and drills
    • Article number49109053
      EAN4009311090539
      Number of pieces40
      Bits16 x 25 mm, S2 steel, C 6.3 shank: PH1, PH2, PH3, PZ1, PZ2, PZ3, H3, H4, T10, T15, T20, T25, T27, T30, T40, SL5
      Bit holderQuick-change, 60 mm, carbon steel, E 6.3 shank, magnetic
      Sockets5 x 1/4" drive, CV steel: 5 / 6 / 8 / 10 / 13 mm
      Countersink12 mm, E 6.3 shank, carbon steel
      Metal drills8 x roll-forged HSS, 135° split point: 2x 3 / 2x 4 / 2x 5 / 2x 6 mm
      Wood drills4 x roll-forged carbon steel with centring point: 4 / 5 / 6 / 8 mm
      Masonry drills5 x forged carbon steel, carbide tipped: 3-8 mm
      CaseAuto-lock clip closure, transparent lid
    • N$709.00
    • Einhell L-CASE 40-Piece Bit, Socket & Drill Set for Wood, Stone and Metal

    • A 40-piece Einhell set with S2 screwdriver bits, magnetic holder, 1/4" sockets, countersink and drills for wood, metal and masonry, all in a clip-lock case with clear lid.
    • Code: 9108001205
    • In Stock
      • 39-piece bit and drill bit set for drill drivers
      • 8 twist drill bits from 2 mm to 6.5 mm
      • 24 screwdriver bits with E6.3 shank: PH, PZ, hex, slotted and Torx profiles
      • 5 socket spanner inserts for driving nuts
      • 1 countersink for flush countersinking of screws
      • Quick-change bit holder included
      • Compatible with standard drills and cordless screwdrivers
      • Supplied in a practical L-Box storage case
    • Item number49108911
      EAN4009311089113
      Total pieces39 pcs
      Number of drills8 pcs
      Drill diameters2 / 2.5 / 3 / 3.5 / 4 / 5 / 6 / 6.5 mm
      Number of bits24 pcs
      Bit typesPH1, PH2, PZ1, PZ2, PZ3, H4, H5, SL5, T10, T15, T20, T25, T27, T30, T40
      Bit shankE6.3
      Number of sockets5 pcs
      Number of countersinks1 pcs
      Bit holder1 quick-change bit holder
    • N$494.00
    • Einhell L-Box 39-Piece Bit and Drill Bit Set

    • A 39-piece Einhell set with 8 twist drill bits, 24 E6.3 screwdriver bits, 5 socket inserts, a countersink and a quick-change bit holder, all in a handy L-Box case.
    • Code: 9108001210
    • In Stock
      • 15-piece drill bit set for wood, masonry and steel
      • 5 wood drill bits: 10, 8, 6, 5 and 4 mm
      • 5 carbide-tipped masonry bits for brick, stone and concrete: 10, 8, 6, 5 and 4 mm
      • 5 HSS bits for steel and metal: 8, 6, 5, 4 and 3 mm
      • Fits common hammer drills and drill drivers
      • Supplied in 3 storage cases of 5 bits each
    • Article number49109157
      EAN4009311091574
      Number of bits15
      Bit materialMetal
      Wood bits5 (Ø 10, 8, 6, 5, 4 mm)
      Carbide masonry bits5 (Ø 10, 8, 6, 5, 4 mm)
      HSS steel bits5 (Ø 8, 6, 5, 4, 3 mm)
      Storage cases3
    • N$373.00
    • Einhell 15-Piece Drill Bit Set for Wood, Masonry and Steel

    • A 15-piece Einhell drill bit set with five bits each for wood, masonry and steel, supplied in three storage cases. It suits common hammer drills and drill drivers.
    • Code: 9108001225
    • In Stock
      • 16-piece set covering metal, wood and masonry drilling
      • 5 HSS metal drill bits (2, 3, 4, 5, 6 mm) with 135° split-point tip
      • 5 carbon steel wood drill bits (3, 4, 5, 6, 8 mm) with centre point
      • 6 masonry drill bits (3, 4, 5, 2x 6, 8 mm) with inserted carbide plate
      • E 6.3 shank fits common drill chucks and bit holders
      • Suitable for sheet metal, plastic, masonry, sand-lime brick and wood
      • M-CASE storage box with transparent lid and auto-lock clip closure
      • Interchangeable inserts for flexible organisation
    • Item number49108953
      EAN4009311089533
      Number of pieces16
      Metal drill bits5x (2 / 3 / 4 / 5 / 6 mm), roll-forged HSS, 135° split-point tip
      Wood drill bits5x (3 / 4 / 5 / 6 / 8 mm), roll-forged carbon steel, centre point
      Masonry drill bits6x (3 / 4 / 5 / 2x 6 / 8 mm), forged carbon steel, inserted carbide plate
      ShankE 6.3
      Suitable materialsSheet metal, plastic, masonry, sand-lime brick, hard and soft wood
      StorageM-CASE box with transparent lid and auto-lock clip closure
    • N$374.00
    • Einhell M-CASE 16-Piece Drill Bit Set for Wood, Masonry and Metal

    • A 16-piece Einhell drill bit set with HSS metal, carbon steel wood and carbide-tipped masonry bits, all with an E 6.3 shank, stored in a practical M-CASE box.
    • Code: 9108001230
    • In Stock
      • Aluminium rail for precise, straight cuts, including angle cuts
      • Slideway lining helps the saw run smoothly
      • Splinter guard for clean cutting edges
      • Connecting element keeps the two rail sections exactly in line
      • Pressure-sensitive adhesive tapes give a non-slip underside
      • Compatible with all Einhell hand-held circular saws and plunge saws, corded and cordless
    • Item no.4502118
      EAN4006825632675
      Rail length2 x 1000 mm
      MaterialAluminium
      CompatibilityAll Einhell hand-held circular saws and plunge saws
    • N$1,449.00
    • Einhell Aluminium Guide Rail Set, 2 x 1000 mm

    • Two-piece 2 x 1000 mm aluminium guide rail for accurate, straight and angled cuts with all Einhell hand-held circular saws and plunge saws.
    • Code: 9108001350
To top