• Strong polycarbonate lens & frame
• Includes microfiber pouch
• 100% UV protection

• Strong polycarbonate lens & frame
• Includes microfiber pouch
• 100% UV protection

• This low-profile flat deck Slimsport rack has a load-carrying area of 1468mm (57.8") x 1233mm (48.5").
• The sleek side rails have integrated mounting feet. The mounting feet also have additional brace brackets for added strength.
• The high-strength aluminum slats have T-slots suitable for all Front Runner top mount accessories (not included).
• The included standard full fairing with rubber edge trim, makes the rack ultra-quiet.
• Fitment guide and all mounting hardware included.
• 6"/T30 Torx Allen Key for Slimsport Rack is required for installation.
• Note: Drilling required.
• Note: Under Rack Tables and some side mount accessories such as Hi-Lift Jack Bracket and Recovery Device & Gear Holding Side Brackets are not compatible with the Slimsport Tray range.

KSFR007T - Ford Ranger T6.2 Wildtrak/Raptor Double Cab (2022-Current) Slimsport Roof Rack Kit 

Consisting of:
1x KSFR005 - Ford Ranger T6 Double Cab (22-Curr)Slimsport Roof Rack Kit
1x RRAC251 - Ford Ranger T6 Dbl Cab(22-Curr)SlimSport Wind Fairing
1x RRAC971 - Protection Strip

Material Used:
Black epoxy powder - coated T6 aluminium
High strength steel

Assembled Tray Dimensions:
1468mm (57.8") L x 1233mm (48.5") W x 139mm (5.5") H

Approximate Installed Weight: 27.86kg (61.42lbs)

The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.

To determine the approximate height from your vehicle’s roof to the top of your Slimsport Rack add 60mm-70mm (2.4"-2.8") to the highest point of your roof.

• This 1358mm/53.5” long, full-size Slimline II Cargo Roof Rack kit contains the Slimline II Tray, Wind Deflector and two (2) Foot Rails to mount the Slimline II Tray.
• All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle-specific foot rails have openings for storing compatible gear under the rack, such as Front Runner tables.
• Foot Rails allow access to Tables that mount under the rack (1 smaller Pro Stainless Steel Prep Table Kit or 1 larger Pro Stainless Steel Camp Table Kit).
• Drilling is not required for WildTrak models. For non WildTrak models, drilling into the plastic trim is required for installation.

RFR015T - Ford Ranger T6.2 Wildtrak/Raptor Double Cab (2022-Current) Slimline II Roof Rack Kit

Consisting of:
1x FAFR008 - Ford Ranger T6 DC (2022-Curr) Foot Rails
1x RRSTD07 - SLII Tray - 1255mm(W)X1358mm(L)

Material Used:
Black epoxy powder - coated T6 aluminium
High strength steel

Approximate Installed Weight: 30.221kg (66.63lbs)

The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.

To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.

If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.

If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.

• Multi-functional anti-vibration mechanical glove with finger, thumb palm and back protection
• Maximum dexterity and non-slip performance
• Synthetic leather palm and durable anti-slip PVC patches
• Strengthened palm of the glove for gripping power in slippery conditions
• High visibility composite poly/spandex knitted fabric for impact protection
• Optimum balance between anti-slip and protection for back of hand

Composition

• Black triangular indent pattern PVC palm, index and thumb patch, double stitched
• Black form fitting leatherette palm & knuckle area
• Fluorescent yellow spandex back
• Finer tipped
• Velcro closing elasticated cuff

Suitable for use in

• Outdoor machinery
• Mining
• Automotive

Connector
2 - Male Hose Connector
1 - Female Hose Connector

Content: 

• Air hose repair connector
• 1 - 1/4" male x 3/8" air hose repair
• 3 - hose clamp
• T21467 3/8" x 15m

• Checks CO2 in cooling system and indicates its presence by testing fluid colour change.

• Checks exhaust gases presence in cooling system. If detector liquid turns from blue to green or yellow, it indicates gasket is not in good condition.

• Use with cone adaptor or in conjunction with radiator caps

Conforms to DIN ISO 5746

For heavy continuous use

Good lever action for easy cutting

Induction-hardened precision cutting edges, hardness 62 - 64 HRC

For flat and round material

To cut all wire types including piano wire, 1.6 mm

GEDORE special hardened and tempered steel, drop-forged, oil-hardened and annealed

JC = chrome-plated, 2-component handles

TL = black, with blue dipped handle protectors

For Similar DIY Tools, Please Click Here

Length (L, L1): 225 mm

Jaw length (L3): 42.2 mm

Width of head (b, b1, n, W3): 27.7 mm

Width of jaws (W4): 6.5 mm

Thickness of head (T1): 13 mm

Weight: 351 g

Battery voltage: 18.0 V

Weight: 0.6 kg

The high-endurance 18 volt XL battery with 4.0 Ah and COOLPACK technology

Up to 65% longer runtime (cf. with 3.0 Ah battery)

COOLPACK technology for up to 100% longer lifetime (cf. battery without COOLPACK)

Professional 18V System: These batteries and charger can be used for all your Bosch 18V tools