• Dromex complete reflective conti suit with YKK zips and reflective tape on both jacket and pants
• Straight cut jacket with 2 lower mitred pockets and a pen and flap pocket

• Ergonomic cut with sporty modern silhouette
• Flexbelt® waistband with elasticated side elements, soft roughening on the inside
• Extra sturdy, triple-stitched seam on inside leg
• Wide belt loops with Velcro for worker bag
• 2 side pockets and 2 back pockets reinforced with CORDURA®
• Reinforced functional ruler pocket and multi-compartment thigh pocket
• Leg length: Short
• Upper material: Mixed fabric
• Pockets / Storage: Slanting pockets, Safety pocket, Thigh pockets, Mobile phone pocket, Ruler pocket, Back pockets
• Adjustment elements: Adjustable waistband
• Special features: Triple seams

Material: Shell 65% Polyester / 35% Cotton (approx. 245 g/m²)

Care instructions: Machine wash 60 °C, Do not bleach, Tumble dry, Warm iron, Dry cleaning possible

Heavy duty model for the removal of discs, pulleys, wheels, ball bearings etc.

SCREW IT! JUST GLUE IT by GLUEDEVIL is a versatile, high-strength building adhesive and sealant. Leveraging hybrid polymer technology, it bonds and seals virtually everything to anything under any conditions, including underwater.

Key Features:

Exceptional Strength: Replaces nails, screws, and other mechanical fixings.

Versatile Applications: Ideal for house numbers, signs, panels, skirting boards, mirrors, tiles, and more.

Weatherproof: Resistant to UV, weathering, and aging.

Environmentally Friendly: Solvent, silicone, and isocyanate-free.

Ease of Use: Single component application, can be applied to wet surfaces, paintable.

Applications:

Household Fixes: Wallboards, skirting boards, key holders, picture frames.

Construction: Floor joints, natural stones, roof constructions.

Automotive and Caravans: Car bodies, caravans.

Decorative Elements: Cornices, dado rails, cover strips.

Bathroom and Kitchen: Sealing sanitary fixtures and tiles.

Chemical Resistance:

Good Resistance: Water, aliphatic solvents, mineral oils, grease, diluted inorganic acids and alkalis.

Poor Resistance: Aromatic solvents, concentrated acids, chlorinated hydrocarbons.

Directions for Use:

Ensure surface is clean, dry, and free from dust, oil, and grease.

Apply adhesive in vertical/horizontal stripes with 10-15 cm spacing for airflow.

Press materials into position, maintaining a 2-3 mm adhesive thickness.

Chemical Base: Silane Terminated Polymer

Specific gravity: 1,52 ± 0,03 g/cm3 (ASTM D 1045–86)

Tack free time: approx. 5-10 min. (25ºC and 50% R.H)

Shore Hardness: 50 ± 5 (ASTM D 53505)

Elongation at break (%): > 300 (DIN 53504)

Tensile strength (MPa): >1, 90 (DIN 53504)

Application Temperature: +5 °C to +35 °C

Temperature Resistance: -40 °C to +90 °C

Bonding Time: Maximum strength in 24 hours

Capacity: 90 ml or 290 ml

Colour: clear or white