62piece 3/8″ Dr. Tool Set

Content:

- 15x 3/8″ Dr. 6pt Sockets: 7, 8, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22, 24mm

- 1x 3/8″ Dr. Quick-Release Offset Ratchet

- 1x 3/8″ Dr. Universal Joint

- 2x 3/8″ Dr. Spark Plug Sockets: 16, 21mm

- 2x 3/8″ Dr. Extension Bars: 3″(75mm), 6″ (150mm)

- 10x Combination Wrenches: 8, 10, 11, 12, 13, 14, 15, 17, 18, 19mm

- 1x 1/4″ Dr. Spinner Handle

- 1x Bit Coupler – 1/4″ Dr. x 1/4″

- 24x 1/4″ Screwdriver Bits (25mm):

       4x Phillips” #0, #1, #2, #3

       4x Slotted: 4, 4.5, 5.5, 6mm

       7x Star: T10, T15, T20, T25, T27, T30, T40

       5x Hex: 3, 4, 5, 6, 7mm

       4x Pozi: #0, #1, #2, #3

- 2x Screwdrivers: Phillips #2 x 100mm, Slotted 6.5mm x 100mm

- 1x 6″ (150mm) Diagonal Cutting Pliers

- 1x 7″ (180mm) Combination Pliers

- 1x 7″ (180mm) Locking Grip Pliers

- Blowcase

This is a standard harness with non-specialised features and is recommended for those who need to navigate obstacles while working at heights. The double leg lanyard improves safety to the wearer by allowing them to remain attached to at least one anchor point at all times, through the use of one hook, while moving the second hook around the obstacle to a new anchor point. The adjustable leg straps improve safety to the wearer through a customised fit.

• Permanently attached, double leg, shock absorbing lanyard with scaffolding hooks
• Adjustable leg & chest straps
• Double scaffolding hooks
• One size fits all

This is a standard harness with non-specialised features and is recommended for those who need to navigate obstacles while working at heights. The double leg lanyard improves safety to the wearer by allowing them to remain attached to at least one anchor point at all times, through the use of one hook, while moving the second hook around the obstacle to a new anchor point. The adjustable leg straps improve safety to the wearer through a customised fit.  

The harness comes standard with a suspension trauma prevention strap that can be deployed in the event of fall, providing the wearer with a standing step to maintain healthy blood flow whilst awaiting rescue.

• Permanently attached double leg, shock absorbing lanyard, with scaffolding hooks
• Adjustable leg and chest straps
• Standing step

This is a belted harness with non-specialised features and is recommended
for those who need to navigate obstacles while working at heights. The
double leg lanyard improves safety to the wearer by allowing them to remain
attached to at least one anchor point at all times, through the use of one hook,
while moving the second hook around the obstacle to a new anchor point. The
adjustable leg straps improve safety to the wearer through a customised fit.
The adjustable shoulder straps and waist buckle provide enhanced comfort
to the wearer.

• Permanently attached, double leg, shock absorbing lanyard with scaffolding hooks
• Adjustable shoulder, leg, waist & chest straps
• One size fits all
• Double scaffolding hooks

This is a multi-purpose harness with specialised features engineered for
those who need to perform multiple functions whilst working at heights.
The harness features a dorsal D-Ring attachment point that enables the
wearer to select the correct lanyard attachment for their work requirement,
while the frontal D-Ring attachment point enables the wearer to perform a
rescue operation or provide an attachment point for a vertical or retractable
lifeline.

The 2 side D-Rings on the waist belt enable the wearer to attach a work
positioning belt to the harness thereby enabling them to free up their hands
while working at heights.

Available in 4 sizes, the harness features fully adjustable straps in the
shoulder, chest, waist and leg areas, enabling the wearer to customise the
fit for enhanced comfort and better focus on the job. Comfort is further
enhanced through added padding to the waist belt enabling pressure to be
spread over a larger area.

The harness comes standard with a suspension trauma prevention strap that
can be deployed in the event of a fall, providing the wearer with a standing
step to maintain healthy blood flow whilst awaiting rescue.

• 4 attachment points: Chest & dorsal D-ring with work positioning D-rings
• Adjustable leg, waist, shoulder, & chest straps
• Padded waist area
• Standing Step

This is a rope access and rescue harness with specialised features. The
harness has been engineered for those who need to navigate obstacles while
ascending or descending from heights; performing a rescue; or working at
heights in conditions where multiple functionalities are needed.

The waist D-Ring acts as the main rope anchor point while the chest D-Ring
performs the function of a back-up rope anchor point or attachment point for
a vertical or retractable lifeline.

The dorsal D-ring enables the wearer to select the correct lanyard attachment
for their work requirement, if needed, and the side D-rings enable the wearer
to attach a work positioning belt to free up their hands while working at
heights.

The waist belt contains two gear loops where the wearer can attach tools,
freeing up the wearer’s hands and improving safety whilst working at heights.

Available in 4 sizes, the harness features fully adjustable straps in the back,
shoulder, waist and leg areas, enabling the wearer to customise the fit for
enhanced comfort. Comfort is further enhanced through added padding to
the leg and waist straps enabling pressure to be spread over a larger area.

• 5 attachment points: Front waist, chest & dorsal D-ring with work positioning D-rings & loops
• Adjustable leg, waist, shoulder and back straps
• Padding in the leg & waist areas
• 2 Gear Loops

This is a work positioning lanyard that forms part of a positioning device system.

The lanyard has been engineered to support the wearer on elevated vertical surfaces, such as a structure or pole.

The work positioning lanyard connects a wearer to an anchor point, by looping the lanyard around the anchor point and attaching itself to the side D-rings of the harness waist belt, thereby enabling the wearer to operate from heights, hands-free.

This must be used in conjunction with a fall arrest system.

The positioning lanyard has been fitted with PVC protective sleeve to enhance the durability of the product against abrasive materials and improve safety to the wearer.

• Double snap hooks
• Adjustable webbing with PVC protector

This is an endless round climbing sling that is used to create an anchor point over a structure that is too large for the fall arrest connector hook.

The sling is comprised of 38mm seat belt webbing that is encased into 50mm tubular webbing to protect the equipment against abrasive material thereby enhancing the durability of the sling and improving the safety to the user.

Supplied as a set of two units, the user would wind each sling around the structure, connecting one fall arrest connector hook to one climbing sling.

It is important to note that the distance from the anchor point (now created on the structure) to the fall arrest body harness anchor point must not exceed 2000mm, i.e. 1750mm (lanyard length) + length of the endless round climbing sling < 2000mm.

• 38mm seat belt webbing encased into a 50mm tubular webbing
• Supplied as a set of two

This is an adjustable double leg, shock absorbing lanyard with two Scaffolding hooks and a single screw gate carabineer that is engineered to attach to a dorsal D-Ring on a stand-alone, fall arrest harness.

This lanyard is recommended for those who are required to navigate obstacles whilst working at heights. The double leg lanyard improves

safety to the wearer by allowing the wearer to remain attached to at least one anchor point at all times through the use of one hook, while moving the second hook around the obstacle to a new anchor point.

The adjustable legs allow the wearer to reduce the overall length of the lanyard, thereby reducing the fall distance and following best working-at-heights practice.  The built-in shock absorber is engineered to reduce the total force experienced in a fall to a survivable force of less than 6kN.

• Adjustable double leg with scaffolding hooks
• Single leg with screw gate carabineer
• Shock absorber

• Extremely robust (9 m drop test) flashlight with a shock-absorbing rubberized head and end cap
• Anodized type II aluminium body
• Impact resistant lens and reflector
• Impact resistant rating IK08 (IEC 62262)
• Water and dust proof (IP67)
• Bright high performance LED
• 2 light levels: high and low
• Needs 3 AAA Batteries (not included)

• Extremely robust (9m drop test) flashlight with a shock-absorbing rubberized head and end cap
• Anodized type II aluminium body
• Impact resistant lens and reflector
• Impact resistant rating IK08 (IEC 62262)
• Water and dust proof (IP67)
• Bright high performance LED
• 2 light levels: high and low
• Needs 6x AA Batteries