Installs to the side profile of your Front Runner Slimline II Roof Rack.

Swings out 90 degrees from the side of the rack, allowing your water tap to clear the side of your vehicle.

The spring pin locks the extension bracket in a closed or opened position.

Features a shower head holder.

Consists of:

• 1 x Tap Extension Bracket
• Installation Hardware
• Fitting Instructions

Materials used: Black powder coated high strength steel

Product Dimensions: 315mm (12.4") L x 187mm (7.4") W x 73mm (2.9") H

Weight: 1.3kg (2.9lbs)

Designed to temporarily mount the Front Runner Telescopic Camping Light.

Installs easily into the front, back or side profiles of your Frontrunner Slimline II rack or on the side of the Frontrunner Slimsport rack.

Made of steel and sealed in the same durable, black powder coating as your rack.

Consists of:

• 1 x Telescopic Camp Light Rack Bracket
• Installation Hardware
• Fitting Instructions

Materials used: Black powder coated steel

Product Dimensions: 147mm (5.8") L x 68mm (2.7") W x 102mm (4") H

Weight: 0.6kg (1.3lbs)

Fit a bottle opener to your rack for whenever you need to crack open a cool one.

Black powder coated stainless steel for protection against the elements.

Can be installed on the left or right side of the Front Runner Slimsport Rack by sliding the opener into any slat and fastening the bolt.

Can be installed anywhere along the sides of the Front Runner Slimline II Roof Rack Tray by sliding the opener into the T-slot and fastening the bolt.

Consists of:

• 1 x Bottle Opener
• Installation Hardware
• Fitting Instructions

Materials used: Black powder coated steel

Product Dimensions: 60mm (2.4") L x 45mm (1.8") W x 40mm (1.6") H

Weight: 91g (3.2oz)

The adjustable stainless steel latch with safety catch holds your Jerry Cans firmly in place over a lifetime of off-road abuse.

For use with 20l / 5.3 gallon NATO/Wedco style military cans.

This strap covers the Jerry can caps. Add your own cable lock or Rack Accessory Lock / Small and you'll never have to worry about stolen fuel while on the road.

Made of black powder coated high strength steel and designed to easily bolt to the Front Runner Roof Racks using the flat slotted slats in the rack.

Note: Not suitable for Scepter Style containers.

Consists of: 1x Strap Assembly, 1x Base, 2x Catches, Installation Hardware, Fitting Instructions

Material: Black powder coated high strength steel

Dimensions (LxWxH): 513 x 333 x 371 mm

Weight: 4.3 kg

The adjustable stainless steel latch with safety catch holds your Jerry Cans firmly in place over a lifetime of off-road abuse.

For use with 20l / 5.3 gallon NATO/Wedco style military cans.

This strap covers the Jerry can caps. Add your own cable lock or Rack Accessory Lock / Small and you'll never have to worry about stolen fuel while on the road.

Made of black powder coated high strength steel and designed to easily bolt to the Front Runner Roof Racks using the flat slotted slats in the rack.

Note: Not suitable for Scepter Style containers.

Consists of:   1x Strap Assembly, 1x Base, 1x Catch, Installation Hardware, Fitting Instructions

Material: Black powder coated high strength steel

Dimensions (LxWxH): 513 x 165 x 370 mm

Weight: 2.4 kg

The Shower Arm unhooks easily from the base and folds in half, compact, to be stored under a car seat or inside a Front Runner Wolf Pack, etc.

Mounts anywhere off the side of a Front Runner Roof Rack.

Please Note: This product is not compatible with Frontrunner Slimsport rack kit range.

Materials used:

2.5mm (0.098") black powder coated stainless steel

Lightweight and can carry up to 20l (5.28 gallons) of water suspended from the roof rack

Consists of: Lower shower arm, upper shower arm and a nuts and bolts kit

Product Dimensions: 530mm (L) x 120mm (W) x 90mm (H)

Weight: 2kg

Maximum Load Capacity: 25kg

Is this suitable for my bike?
So long as your crank spindle is 21mm or wider and is steel, then yes!
 

But is it safely secured?
Most certainly, there are 7 high powered neodymium magnets keeping the tool locked into your crank spindle.  The tool has been tested around the world through the Enduro World Series, with no reported failures.

How much does it weigh though?
Without bits, the tool itself is 80g.  With bits installed, it can come up to a 115g total.  Bear in mind that this weight, whilst minimal, is as low as it can go in your bike, which only aids in cornering prowess and overall bike handling.

Every tool you need to fix your bike on the trail, all sneakily hidden in plain sight!

100% designed and handcrafted in Italy, the All In Multitool features 6 customisable tool bit slots, plus storage for a quick link for your chain.  It is locked in place within the hollow of your crank arms with 7 high resistance neodymium magnets.  You'll never leave your multitool at home again.

The tool comes stock with a 3mm, 4mm, 5mm, and 6mm Allen key bits, a t25 torx head, and a #1 Phillips head screwdriver.  

If you find these bits aren't to your liking, then fear not!  Each piece is replaceable from your local hardware store, and you can fully customise which 6 tool bits you'd like to have.

• 76mm wide solid brass body padlock for strength, durability and resistance
• Hardened steel shackle for extra cut resistance
• 5-pin cylinder for maximum pick resistance
• Dual locking levers for added protection from prying and hammering
• Limited Lifetime Warranty
• Security Level: 6

• 85mm wide solid brass body padlock for strength, durability and resistance
• Hardened steel shackle for extra cut resistance
• 5-pin cylinder for maximum pick resistance
• Dual locking levers for added protection from prying and hammering
• Limited Lifetime Warranty
• Security Level: 7