SG40 – 4 Ton Base Plate 2-Post Lift (Manual Release)

The SG40 is a 4-ton base plate 2-post lift featuring a low-profile floor plate that connects the two columns. This design makes it ideal for workshops with low ceilings or limited vertical space. Despite the center plate, which may limit the use of transmission jacks, this lift is well-suited for servicing a wide variety of vehicle types, including tall vehicles with roof racks or accessories.

Features and Benefits

• Manual Safety Lock Release
  Even during a power outage, the vehicle can be safely lowered thanks to the manual lock release mechanism—offering consistent uptime and control in any scenario.

• Base Plate Design
  Without an overhead beam, this lift is perfect for workshops with height restrictions and allows for taller vehicles to be accommodated easily, from commercial vans to off-roaders with roof equipment.

• Stainless Steel Cables
  Corrosion-resistant and highly durable for long-term use, ensuring reliable lifting performance over time.

• Double Hydraulic Cylinders
  A high-strength chain drive system delivers consistent and controlled lifting for enhanced technician safety and vehicle stability.

• Dynamic and Static Safety Testing

  • Dynamic Test (115% Load Capacity): Verifies performance through the entire lift cycle.

  • Static Test (150% Load Capacity): Confirms the structure can handle heavy-duty loads without failure.

• Dual Safety Mechanisms
  A combination of column ladder locks and hydraulic seal protection ensures vehicles remain securely elevated even in the event of hydraulic failure—keeping technicians and vehicles safe at all times.

• Hydraulic Overload Protection
  Prevents accidental overload by automatically stopping lift operation when excessive weight is detected.

• Low Voltage ABS Control Box (24V)
  Complies with ISO safety standards and electrical norms, offering a safe and efficient user experience.

• High-Pressure Seals (Made in Italy)
  Designed to withstand intense hydraulic pressure and mechanical stress, minimizing the risk of fluid leaks and downtime.

• Certified to CE Standards
  Complies with all European safety regulations for peace of mind and workshop compliance.

With its 4-ton capacity, robust safety systems, and space-efficient floor plate design, the SG40 is a reliable workhorse for general servicing needs. Whether you're running a compact city garage or a low-roof industrial workshop, this 2-post lift offers professional-grade lifting capability, versatile vehicle fitment, and enhanced operational safety.

• Lifting Capacity: 4000 kg

• Max Lifting Height: 1900 mm

• Min Lifting Height: 85 mm

• Overall Height: 2826 mm

• Overall Width: 3426 mm

• Width Between Columns: 2803 mm

• Max Vehicle Width: 2775 mm

• Lifting Time: 40 seconds

• Lowering Time: 60 seconds

• Noise Level: <70 dB(A)

Electric Motor:

• Voltage: 220V

• Power: 2.2 kW

• Speed: 2850 rpm

Power Unit:

• Type: Gear

• Flow Rate: 4.8 cm³/g

• Working Pressure: 170–190 bar

• Peak Pressure: 210 bar

Carry bag with individual slots for utensils and cutting board

2 hanging-loops, for easy access to utensils on the go

Folds up, for compact storage

Includes:

• 4x steak knives
• 4x forks
• 4x spoons
• 4x tea spoons
• 1x bread knife
• 1x cocks knife
• 1x utility knife
• 1x bottle opener with corks screw
• 1x specular
• 1x serving spoon
• 1x meat fork
• 1x cutting board
• and carry bag

• Form-fitting, lightweight design protects the tool and work surface while adding minimal size or weight to the tool.
• Flexible material allows for easy install and removal.
• Durable proprietary rubber designed to withstand corrosive materials commonly found in maintenance environments.
• Not for use on or near live electrical circuits.
• Use on any other product than advised may result in damage to tool motor and may void tool warranty.

Brushless POWERSTATE™ motor provides corded drilling performance with strongest magnet holding force on ¼″ steel and 40 x 18 mm holes per battery charge

REDLINK PLUS™ intelligence system delivers an advanced digital overload protection for tool and battery and uniquely enhances the tool performance under load

REDLITHIUM™-ION battery pack provides superior pack construction, electronics and fade-free performance to deliver more run time and more work over pack life

AUTOSTOP™ lift-off detection: Detects excess rotation and automatically cuts power to the drill for best user protection

Self-powered permanent magnet with 8,890 N of holding force prevents accidental magnet deactivation for improved user protection and easy alignment

2 speed gear box for optimised drilling speed with 400 and 690 rpm´s when using annual cutters or twist drill bits

Maximum drilling capacity of 38 mm with use of annual cutters and 13 mm straight shank twist drill bits

Keyless 19 mm Weldon reception for fast and easy accessory change

On board magnet lubrication tank for fixing on the machine or on the material, especially when drilling in vertical positions

146 mm stroke length for usage of different accessories

Tool-free detachable handle for right or left hand usage

On board LED light to illuminate the work surface

Flexible battery system: works with all MILWAUKEE® M18™ batteries

• M12 B2 - M12™ 2.0 Ah battery
• C12 C - M12™ Charger

• M12 B4 - M12™ 4.0 Ah battery
• C12 C - M12™ Charger

The Brighter, Tougher, Taller Stand Light – M18™ ROCKET™ LED Tower Light is designed to give professionals an area lighting solution that adapts, performs, and survives industrial use unlike any other portable work light.  The 2130-20 can be setup in seconds with its max extension 7’ high, and it collapses down to 40” for easy transport and storage.  The light head can be extended from 4-7’ to light overhead work or minimize shadows when casting light downward.  Capable of filling large areas with light, it provides 2,000 lumens of high definition light output for in its high mode, 1,300 in medium and 850 in low, and it can run for up to 4, 6, or 10 hours with an M18™ REDLITHIUM™ XC 5.0 Battery Pack. It uses high quality LEDs with a neutral white color and a high color rendering index paired with a Milwaukee® designed reflector to produce an even beam pattern.    Its reinforced legs are impact resistant, and its low center of gravity provides a stable base.   The light head is protected by an impact-resistant lens and bezel, and it nests into a protective shroud for secure transport and storage.  Its LEDs never need to be replaced, and are backed by a limited lifetime warranty.  The combination of these technologies offers professionals the highest quality LED lighting solution, on or off the jobsite.