Wynn's Radiator Stop Leak is a sealing product to stop small leaks in the cooling system, with anti-corrosive properties.

Packaging:          325ml

• Stops and prevents leakages in the radiator, cooling and heating system.
• Stops head gasket leaks.
• Will not harm rubber hoses, gaskets or other system components.
• Is compatible with all antifreezes and coolants, also with OAT coolants (Organic Acid Technology).
• Is formulated to avoid clogging of radiator waterways and temperature sensors.
• Enhanced protection against rust and corrosion.

Designed to dissolve high temperature petrol deposits on the injector pintle, keeping injectors clean and lubricated. Removes water from the fuel system, restores efficient fuel delivery and is safe to use with all fuel system components including high pressure direct injection, catalytic converters and O2/ lambda sensors.

Packaging:          375ml

• Reduces exhaust smoke caused by incomplete fuel combustion
• Removes injector pintle deposits restoring fuel flow and optimum fuel atomisation
• Improves fuel economy and overall engine performance

<iframe width="560" height="315" src="https://www.youtube.com/embed/9P96_LcfSoQ" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen></iframe>

Promotes complete petrol combustion while cleaning carbon deposits from the upper cylinder preventing preignition and engine run-on. Ideal to use in engines which are not run regularly to avoid fuel deposits and carbon build up caused by contamination and adverse effects of fuel degradation.

Packaging:          125ml

• Supports complete combustion
• Frees sticky piston rings
• Reduces exhaust emissions
• Maintains lambda/O2 sensor and EGR cleanliness
• Inhibits corrosion and improves fuel consumption

Wynn’s Engine Start is the easy solution to starting problems. Avoids wear of the starter motor and prevents battery drain. Engine start assists with cold weather starting, flooded engines and helps restore fuel pump pressure after a vehicle has run dry.

Unlike many starting fluids, Wynn’s Engine Start can be used in 4 stroke and 2 stroke engines as it contains a friction proofing lubricant.

• Fast acting starting solution
• 2 stroke engine safe
• Contains friction proofing
• For petrol or diesel engines

Applications

• Petrol or Diesel engines to promote easy starting
• Vehicles and motor bikes, especially if not in regular use
• Outboard motors and two stoke engines
• Mowers, chain saws, weed eaters etc.

Directions

• Hold can upright              
• Remove air filter for best results              
• Spray into air intake for a few seconds then crank engine            
• Repeat if necessary       

Packaging

12 x 200ml

12 x 375ml

Wynn’s Gear Oil Treatment and Assembly Lube, is a fully supplementary gear oil package scientifically formulated using the latest technology to provide all the below listed gear box, differential and wide variety of automotive and industrial equipment. Formulated to meet international vehicle manufacturer’s specifications of extreme pressure gear oils and recommended for use in limited slip differentials.

Packaging:          90g

• Reduces gear friction & wear extending component life
• Provides oxidation & shear stability for longer oil life
• Quietens diff & manual gearbox whine providing smoother gear changes
• Anti-Wear & Extreme Pressure additives provide excellent protection during engine rebuilds & component assembly

Wynn’s Power Steering & Auto-transmission Conditioner is an oil soluble supplement developed to eliminate PAS (Power assisted Steering) stiffness, shudder and noise as well as ease shifting of automatic gearboxes. Prevents oil leaks by rejuvenating the seals while maintaining optimum performance of the PAS pump and load bearing components. Wynn’s Power Steering & Auto-transmission Conditioner can be added to all conventional ATF and power steering fluid.

Packaging:          375ml

• Eliminates Power Steering stiffness, shudder and noise

• Provides smoother operation of power assisted steering & auto-transmission gear changes
• Prevents ageing and oxidation of automatic transmission and power steering fluids
• Prevents and cures oil leaks by nourishing the rubber/ nitrile seals and O-rings

Wynn’s Throttle Body and Air Intake Cleaner will remove sticky residue, caused by oil mist crankcase fumes, from air intake system components as well as petrol residues, gums and resins. These tar like deposits build up on the idle speed control and butterfly valves leading to irregular airflow and erratic idling. Formulated for modern petrol vehicles, will not remove protective surface coatings and is O2/ Lambda sensor safe

Packaging: 285g

• Removes sticky air intake build up
• Restores correct airflow to improve air/fuel mixture
• Cleans contaminated EGR & idle speed valves
• Restores smooth idling & throttle response