This is a rope access and rescue harness with specialised features. The
harness has been engineered for those who need to navigate obstacles while
ascending or descending from heights; performing a rescue; or working at
heights in conditions where multiple functionalities are needed.

The waist D-Ring acts as the main rope anchor point while the chest D-Ring
performs the function of a back-up rope anchor point or attachment point for
a vertical or retractable lifeline.

The dorsal D-ring enables the wearer to select the correct lanyard attachment
for their work requirement, if needed, and the side D-rings enable the wearer
to attach a work positioning belt to free up their hands while working at
heights.

The waist belt contains two gear loops where the wearer can attach tools,
freeing up the wearer’s hands and improving safety whilst working at heights.

Available in 4 sizes, the harness features fully adjustable straps in the back,
shoulder, waist and leg areas, enabling the wearer to customise the fit for
enhanced comfort. Comfort is further enhanced through added padding to
the leg and waist straps enabling pressure to be spread over a larger area.

• 5 attachment points: Front waist, chest & dorsal D-ring with work positioning D-rings & loops
• Adjustable leg, waist, shoulder and back straps
• Padding in the leg & waist areas
• 2 Gear Loops

This is a work positioning lanyard that forms part of a positioning device system.

The lanyard has been engineered to support the wearer on elevated vertical surfaces, such as a structure or pole.

The work positioning lanyard connects a wearer to an anchor point, by looping the lanyard around the anchor point and attaching itself to the side D-rings of the harness waist belt, thereby enabling the wearer to operate from heights, hands-free.

This must be used in conjunction with a fall arrest system.

The positioning lanyard has been fitted with PVC protective sleeve to enhance the durability of the product against abrasive materials and improve safety to the wearer.

• Double snap hooks
• Adjustable webbing with PVC protector

This is an endless round climbing sling that is used to create an anchor point over a structure that is too large for the fall arrest connector hook.

The sling is comprised of 38mm seat belt webbing that is encased into 50mm tubular webbing to protect the equipment against abrasive material thereby enhancing the durability of the sling and improving the safety to the user.

Supplied as a set of two units, the user would wind each sling around the structure, connecting one fall arrest connector hook to one climbing sling.

It is important to note that the distance from the anchor point (now created on the structure) to the fall arrest body harness anchor point must not exceed 2000mm, i.e. 1750mm (lanyard length) + length of the endless round climbing sling < 2000mm.

• 38mm seat belt webbing encased into a 50mm tubular webbing
• Supplied as a set of two

Material: Plastic

Set of 2

Colour: red

Material: Plastic

Set of 2

Colour: red

Features

• Strong coupling that needs no pre-adjustment for mounting
• Bikes are secured to the bike rack with soft rubber straps
• Use Thule Bike Frame Adapter 982 for fitting of bikes with non-standard frames (e.g. ladies’ bikes, BMXs, downhill bikes)
• Folds flat for easy storage and handling
• Locks the bike rack to the towbar with the Thule Lock 957 accessory

Technical specifications

Features

• Elegant alternative to tightening anything around the load carrier bar.
• Fits load carrier bars with T-track width 20 mm.
• Replaces standard Thule roof box mounting system with 80mm wide U-bolt.

• Fast and secure fitting using only one hand due to FastGrip quick-mount system that assembles in moments
• Passenger-side opening for easier loading and unloading

Technical specifications

• Smart and functional carrier basket for even the most demanding loads
• Stable design in aluminium
• Size - 85 x 132 cm
• Fits square bars
• Fits aero bars with adapter 878
• Point of attachment adjustable to the load carrier in length
• Thule products undergo rigorous testing and evaluation procedure and meet the highest international approvals such as TUV
• The Thule carrier baskets are mounted to the Thule roof bars
• A complete roof bar system requires the specialised footpack, the vehicle specific fitting kits and the load carrier bars

• Measures AC/DC voltage & current, resistance, capacitance and frequency

• Tests diode, triode, battery and continuity

• Overload and short circuit protection

• Non-contact voltage detection with wire or cable identification diode test (high, medium, low indication)

• Display: 6000 Counts

• DC voltage: 1000V

• AC voltage: 750VDC

• AC/DC Current: 10A

• Resistance: 60MΩ

• Capacitance: 100MF

• Duty cycle: 5~95%

• Frequency: 10MHZ

• Low battery indication

• Backlight

• Data hold

• Auto power off

• Checks 12 volt battery and alternator systems
• LED light for easy and accurate reading

• Tests for voltage and circuit integrity on 3 - 48 volt systems

• Ideal for use on most vehicles including cars, motorcycles, RVs, trailers, boats and trucks

• Computer safe

• Digital LCD display for precise voltage reading

• Long, stainless steel probe for testing in confined areas and piercing through insulation

• Ground clip with insulated sheath

• 3.6m Heavy-duty coiled cord for flexibility and reach

Einhell TC-JS 80/1 Jigsaw

The Einhell TC-JS 80/1 jigsaw is a versatile and powerful tool designed for cutting tasks in wood, plastic, and steel. With its robust motor, ergonomic design, and user-friendly features, it’s ideal for DIY enthusiasts looking for precision and ease of use in their projects.

The Einhell TC-JS 80/1 jigsaw offers precision, power, and convenience in one compact tool. Its adjustable speed, pendulum action, and miter cutting capabilities make it suitable for a wide range of tasks. With ergonomic soft-grip surfaces and an integrated dust extraction system, it ensures comfort and cleanliness, making every project efficient and enjoyable.

Key Features

1. Tool-Free Blade Changing:
   • Quick and effortless saw blade replacement without tools.
2. Electronic Speed Control:
   • Allows precise adjustment of the cutting speed to suit the material being worked on.
3. 4-Setting Pendulum Action:
   • Enables fast and precise cuts by adjusting the blade’s motion for optimal performance.
4. Versatile Cutting Angles:
   • Swiveling soleplate allows miter cuts up to 45° for enhanced versatility.
5. Dust Extraction System:
   • Keeps the work area clean, ensuring better visibility and accuracy during operation.
6. Ergonomic Design:
   • Large soft-grip surfaces for comfortable handling during extended use.

Applications

• Woodworking: Cutting up to 80 mm deep for construction or craft projects.
• Plastic Cutting: Achieve clean cuts up to 20 mm deep in plastic materials.
• Metal Cutting: Precision cutting up to 10 mm deep in steel.
• Miter Cuts: Swiveling soleplate allows angled cuts for creative and precise results.

Power: 550 W

Idle Speed Max: 3000 rpm

Lift Height: 22 mm

Cutting Depth (Wood): 80 mm

Cutting Depth (Plastic): 20 mm

Cutting Depth (Steel): 10 mm

Soleplate Swivel Range: 0° to 45°

Saw Blade Holder Type: T-shaft

Suction Connection Diameter: 36 mm

Product Weight: 1.86 kg