704 Results

Per Page
    • In Stock
      • Wide fit steel toe cap complies with SANS/ISO 20345 to withstand an impact load of 200 joules
      • Stylish leather cut from quality buffalo leather
      • Leather has been tanned for softer, more comfortable feel while maintaining hard wearing characteristics
      • Elastic side gussets give additional support and comfort
      • Pull tab is incorporated int the body of the boot to ensure strength and durability
      • TPU sole for durability with oil and acid resistance as well as anti-slip and anti-static properties
      • Shank reinforcement for support and stability
      • Moulded 100% wool innersole for support and comfort

    • Material: Full Grain Buffalo Leather

    • N$1,704.00

    • Jonsson Chelsea Boot Steel Toe Cap

    • Code: JN00602
    • In Stock

    • Africa’s hardest working boots! The Kontrakta Boot is ISO 20345 and SABS approved. If you need to put safety boots on your contract staff, and are worried that the job might take longer than expected, then these are for you. These safety boots feature a high quality Barton print leather, a steel toe cap and a lightweight and comfortable dual density polyurethane sole.

      • ​High quality, full grain cow leather upper
      • Classic styled, formal boot that doesn’t compromise on industrial safety features
      • EN-ISO 20345 approved carbon steel toe cap
      • Lightweight and comfortable dual density polyurethane sole
      • Ultra comfortable REBEL Safetygear footbed inner sole
      • Taibrelle moisture wicking lining

    • Materials:

      • Upper: Bartan Print Leather Upper
      • Inner Sole: Removable Inner Soles
      • Lining: Breathable and Abrasion Resistant Tai-brelle

      Eyelet:

      • D-Rings

      Sole:

      •  Dual Density Poly-Urethane Sole
      • Temperature Maximum 90ºC (degrees Celsius)
      • Oil Resistant Dual Density PU
      • Slip Resistance - Tested to SATRA PM144 1992 and meets these requirements, however, care should always be taken on wet or oily surfaces
      • Crack Resistance - Tested to 30,000 flex cycles

      Toe Cap:

      • Wide Profile Carbon Steel Toe-Cap
      • Tested to an impact resistance of 200 Joules

      Anti Static Properties:

      • Product is anti static. If application is life critical additional consultation with product expert is required. Electrical resistance can be significantly changed by flexing, contamination or moisture. Introduction of additional inner sole reduces static resistance
    • N$601.00

    • Rebel Kontrakta Boots

    • Affordable,General Purpose Workboots
    • Code: RE128B
    • In Stock

    • Boot Spitzkoppe STC – Namsafe (Sizes S03 to S12)

      Step into comfort, durability, and safety with the Namsafe Spitzkoppe STC Boots, available in sizes S03 to S12. Designed for demanding work environments, these rugged boots provide superior protection, support, and slip resistance for professionals in construction, mining, agriculture, and industrial sectors. With a focus on safety and comfort, the Spitzkoppe STC is your reliable choice for all-day wear.

      Experience reliable protection and comfort with the Namsafe Spitzkoppe STC Boots, engineered for safety, durability, and performance across all demanding work environments.

      Features and Benefits:

      • Safety Certified: Meets industry standards for workplace safety with reinforced toe caps and anti-slip soles.

      • Durable Construction: High-quality materials provide long-lasting wear in tough environments.

      • Comfort Fit: Ergonomically designed with padded collars and breathable linings for all-day comfort.

      • Slip & Shock Resistant: Outsoles engineered to provide excellent grip and reduce fatigue.

      • Wide Size Range: Available in sizes S03 to S12, ensuring the perfect fit for every worker.

      • Versatile Use: Ideal for construction sites, industrial facilities, outdoor work, and general heavy-duty use.

      • Sizes Available: S03, S04, S05, S06, S07, S08, S09, S10, S11, S12

      • Material: Premium leather and synthetic combination

      • Colour: Typically black with durable accents

      • Safety Features: Reinforced toe cap, slip-resistant outsole, shock-absorbing midsole

    • N$375.00

    • Namsafe Boot Spitzkoppe STC

    • Code: NAMSAFE_SPITZKOPPE
    • Out of Stock Online

    • • Soft and strong nitrile.
      • Thinner than similar gloves, nearly same elasticity and touch sensitivity as latex.
      • Micro textured fingertips for optimum grip.
      • Resistant to grease, fats, detergents, etc.
      • Approved to be used in direct contact with all types of food, including fatty foods (EN
      1186).
      • Approved for medical use (EN 455).
      • Silicone free.
      • Weight 3.2 ± 0.5 g.

    • N$497.00

    • Exam Nitrile Gloves (Box)

    • The box includes 150 pairs
    • Code: EXAM_NITRILE_GLOVESB
    • Out of Stock Online
      • Multi-functional anti-vibration mechanical glove with finger, thumb palm and back protection
      • Maximum dexterity and non-slip performance
      • Synthetic leather palm and durable anti-slip PVC patches
      • Strengthened palm of the glove for gripping power in slippery conditions
      • High visibility composite poly/spandex knitted fabric for impact protection
      • Optimum balance between anti-slip and protection for back of hand

       

      Composition

      • Black triangular indent pattern PVC palm, index and thumb patch, double stitched
      • Black form fitting leatherette palm & knuckle area
      • Fluorescent yellow spandex back
      • Finer tipped
      • Velcro closing elasticated cuff

       

      Suitable for use in

      • Outdoor machinery
      • Mining
      • Automotive
    • N$160.00

    • Glove Mach 5 Impact Black

    • Code: 9114349978
    • In Stock

    • KONG® Original Impact-Resistant Gloves – Oil & Gas Industry Standard

      Trusted by industry giants like ExxonMobil, Chevron, Halliburton, and ConocoPhillips, the KONG® Original Gloves are the benchmark for impact protection in the oil and gas sector. Engineered in collaboration with the Oil and Gas Safety Committee, these gloves deliver exceptional hand protection without compromising comfort or dexterity.

      Key Features:

      EN 388 Certified (4242AP) – Proven protection against abrasion, cuts, tears, and punctures
      ANSI Cut Level A2 – Cut resistance of 595g for medium-risk environments
      ANSI Impact Rating 2 – Patented KONG® impact protection shields knuckles and fingers
      Double Layer Synthetic Leather Palm with Dots – Enhanced durability and grip
      Hi-Viz Palm – Improves hand visibility for safety in low-light conditions
      Breathable Nylon Back – Keeps hands cool and comfortable during extended wear
      Extended Neoprene Cuff – Extra wrist support and protection with built-in ID tag
      100% Machine Washable – Easy to clean and reuse; hang dry recommended

      Perfect For: Oil & Gas Industry, Mining & Drilling, Construction & Heavy Equipment, Industrial Maintenance, High-impact environments

      • EN 388 Rating: 4242AP
      • ANSI Cut Rating: A2
      • ANSI Cut Grams: 595g
      • ANSI Abrasion Rating: 4
      • ANSI Puncture Rating: 3
      • ANSI Impact Rating: 2
      • Palm Material: Synthetic Leather with Dots
      • Grip Rating: Dry 4/5, Wet 4/5, Oily 3/5
    • N$795.00

    • Kong Glove Impact - Oil & Gas

    • Code: KONG_GLOVE_IMPACT
    • In Stock

    • Glove uvex Unigrip 6628/09

      Protect your hands with the uvex Unigrip 6628/09 gloves, designed for comfort, durability, and superior grip in industrial and professional environments. These versatile work gloves provide reliable protection while ensuring dexterity for precision tasks, making them ideal for handling tools, machinery, or delicate components.

      Work safely and efficiently with uvex Unigrip 6628/09 gloves, combining comfort, durability, and superior grip for professional-grade hand protection.

      Features and Benefits:

      • Superior Grip: Special coating enhances grip on dry and slightly oily surfaces for safe handling.

      • Comfortable Fit: Ergonomic design with breathable materials reduces hand fatigue during prolonged use.

      • Durable Construction: Made from high-quality materials to withstand abrasion and frequent use.

      • Flexible and Dexterous: Provides excellent finger sensitivity for precise handling tasks.

      • Versatile Application: Ideal for assembly, logistics, automotive, construction, and general industrial work.

      • Material: Nitrile coated / textile backing

      • Colour: Typically grey/black

      • Sizes: Available in multiple sizes (check compatibility)

      • Compliance: Meets relevant EN standards for protective gloves

    • N$85.00

    • Glove uvex Unigrip 6628/09

    • Code: 9114300124
    • In Stock

    • Plum Eyewash pH Neutral 4.9% Phosphate 200ml – Emergency Eye Rinse

      The Plum Eyewash pH Neutral 4.9% Phosphate 200ml provides quick and effective first aid treatment for chemical eye injuries by neutralising both acids and alkalis. With a sterile phosphate buffer solution, this eyewash helps minimise damage and offers reliable emergency protection in workplaces where chemicals are handled.

      Features and Benefits:

      • Effective Neutralisation: 4.9% sterile phosphate buffer neutralises acid and alkali substances on contact.

      • Comprehensive Protection: Proven efficacy in chemical-related eye accidents (except hydrofluoric acid).

      • Compact Size: 200 ml bottle fits easily into first-aid kits, toolboxes, and belt bags.

      • Ergonomic Eyecup: Designed for efficient flow and comfortable rinsing.

      • Easy to Use: Single-handed operation for fast emergency response.

      • Safe & Hygienic: Disposable bottle to ensure sterility and prevent contamination.

      • Durable Supply: CE-marked with a 3.5-year shelf life.

      Important Note: Not suitable for accidents involving hydrofluoric acid (HF), which is highly corrosive and requires specialised first aid.

      Protect your eyes in an emergency with the Plum Eyewash pH Neutral 4.9% Phosphate 200ml – a compact, reliable, and effective safety essential for chemical workplaces.

      • Solution: 4.9% sterile phosphate buffer

      • Use: Neutralises acid and alkali substances in the eye

      • Bottle Size: 200 ml

      • Design: Ergonomic eyecup, single-hand operation

      • Expiry Date: 3.5 years (CE marked)

      • Manufacturer: Plum

    • N$423.00

    • Eyewash pH Neutral

    • Code: 9114000435
    • Out of Stock Online

    • Plum iBox – Portable Eyewash Station

      The Plum iBox is a modern, durable, and user-friendly eyewash station designed to provide quick and reliable emergency eye care. Built from strong EPP material with a see-through window, it allows for easy monitoring of expiry dates and bottle conditions at a glance. The station can be quickly released from the wall bracket and carried directly to the injured person, ensuring fast response in critical situations.

      Ensure workplace safety and fast emergency response with the Plum iBox – a strong, modern eyewash station designed to save valuable seconds when every moment counts.

      Features and Benefits:

      • Clear Visibility: Transparent window for instant monitoring of expiry dates and product condition.

      • Portable Design: Easily released from the wall bracket and carried to the injured person.

      • Spacious Layout: Provides quick and easy access to eyewash bottles.

      • Versatile Use: Can be mounted on a wall or placed on the floor for flexible emergency setup.

      • Durable Material: Constructed from strong EPP for long-lasting protection.

       

      Included: box only, eyewash sold separately

      • Material: Expanded Polypropylene (EPP)

      • Design: Transparent window with spacious, easy-access interior

      • Mounting Options: Wall-mounted or free-standing

      • Manufacturer: Plum

    • N$75.00

    • Eyewash iBox 2 Empty Box

    • Code: 9114000438
To top