704 Results

Per Page
    • In Stock

    • This is a belted harness with non-specialised features and is recommended
      for those who need to navigate obstacles while working at heights. The
      double leg lanyard improves safety to the wearer by allowing them to remain
      attached to at least one anchor point at all times, through the use of one hook,
      while moving the second hook around the obstacle to a new anchor point. The
      adjustable leg straps improve safety to the wearer through a customised fit.
      The adjustable shoulder straps and waist buckle provide enhanced comfort
      to the wearer.

      • Permanently attached, double leg, shock absorbing lanyard with scaffolding hooks
      • Adjustable shoulder, leg, waist & chest straps
      • One size fits all
      • Double scaffolding hooks

       

    • Harness Webbing:
      • 45mm UV-resistant polyester webbing with a minimum breaking load of 2,6 tonnes

      Lanyard Webbing:
      • 45mm UV-resistant polyester webbing with a minimum breaking load of 2,6 tonnes
      • Lanyard length: 1750mm
      • Lanyard length when shock absorber is fully elongated: 3 450mm

      Chest Strap:
      • 45mm UV-resistant polyester webbing with a minimum breaking load of 2,6 tonnes

       

    • N$660.00

    • Belted Double Scaff

    • Code: 9114650154
    • In Stock
      • Triple Needle Posting for extra strength
      • Back Pleat
      • Extra length curved hem
      • Two chest pockets with hook and loop closure
      • Concealed inner chest pocket
      • Pen division
      • Enzyme wash for rugged, worn-in look
      • Bar tacks on stress points for extra strength

    • Fabric: 100% Cotton Twill

      Weight: 135 gm2

    • N$641.00

    • Jonsson Legendary Short Sleeve Shirt

    • Code: LEGESSS
    • In Stock
      • Triple Needle Posting for extra strength
      • Back Pleat
      • Extra length curved hem
      • Two chest pockets with hook and loop closure
      • Concealed inner chest pocket
      • Pen division
      • Enzyme wash for rugged, worn-in look
      • Bar tacks on stress points for extra strength

    • Fabric: 100% Cotton Twill

      Weight: 135 gm2

    • N$641.00

    • Jonsson Two Tone Legendary Short Sleeve Shirt

    • Code: LEGESSSTT
    • In Stock
      • Chest pocket with press stud closure and pen pocket division
      • Triple needle stitching on all seams for extra strength
      • 25mm reflective tape for increased visibility
      • 25mm reflective tape “X” configuration on the back
      • Concealed YKK zip
      • Zip guard to prevent heat transfer from zip
      • Constructed from SABS approved fabric
      • Fabric is chemically treated to resist heat and sparks
      • Side slits for ease of movement
      • Bar tacks on all stress points

    • Fabric: 100% Cotton D59

      Weight: 270 gm2

    • N$640.00

    • Jonsson Flame Resistant Reflective Work Jacket

    • Code: CJ77JTFR
    • In Stock

    • A grade chrome leather apron

      One piece leather

      Riveted neck and waist straps with metal buckles

      Leather thickness: minimum 1.4mm – 1.6mm

      Available Size: 60cm x 120cm, 90x 130 cm or 60 x 90 cm

      Material: Leather

    • N$608.50

    • Welding Leather Aprons

    • Code: WELDING_LAPRONS
    • In Stock

      • Pocket flap with pen division and button closure
      • Semi fitted with back darts
      • Industrial wash
      • Roll up sleeve with tabs
      • Longer length

    • Fabric: 100% Cotton

      Weight: 135 gm2

    • N$606.00

    • Jonsson Women's Long Sleeve Shirt

    • Code: LLSBLS
    • In Stock
      • Minimal styling
      • Button down front
      • Modern fit
      • Extra length curved hem
      • Single chest pocket
      • Double needle posting on side seams
      • Enzyme wash
      • Subtle Jonsson branding
      • Embossed buttons
      • Bar tacks on stress points for extra strength

    • Fabric: 100% Cotton Twill / Denim

      Weight: 135 gm2 / 127,57 g

    • N$605.00

    • Jonsson Legendary Long Sleeve One Pocket Shirt

    • Code: LKSHTLI
    • In Stock
      • Acrylic for durability and easy care
      • Spandex in hem for better fit
      • Anti-pill

    • Fabric: 100% Acrylic

      Weight: 12 Gauge

    • N$600.00

    • Jonsson Men's Sleeveless Pullover

    • Code: OPVRSS
    • In Stock

    • This is a double leg, shock absorbing lanyard with two scaffolding hooks and a single snap hook connector that is engineered to attach to a dorsal D-ring on a stand-alone, fall arrest harness.

      This lanyard is recommended for those who are required to navigate obstacles whilst working at heights. The double leg lanyard improves safety to the wearer by allowing them to remain attached to at least one anchor point at all times, through the use of one hook, while moving the second hook around the obstacle to a new anchor point.

      The built-in shock absorber is engineered to reduce the total force experienced in a fall to a survivable force of less than 6kN.

      • Double leg with scaffolding hooks
      • Single leg with snap hook
      • Shock absorber

    • Harness Webbing:  
      • 45mm UV-resistant polyester webbing with a minimum breaking load of 2,6 tonnes

      Lanyard length: 
      • 1750mm (when shock absorber is intact)
      • 3450mm when shock absorber is fully deployed

      Hooks:
      • Corrosion-resistant steel hooks
      • Scaffolding hooks: 50mm gate opening that can withstand a force of 23kN
      • Snap hook: 20mm gate opening that can withstand a force of 22kN

      Max. fall weight:
      • 140kg

       

       

       

    • N$599.00

    • Double Shock Absorbing Lanyard

    • Code: 9114650162
    • In Stock

    • This is a standard harness with non-specialised features and is recommended for those who need to navigate obstacles while working at heights. The double leg lanyard improves safety to the wearer by allowing them to remain attached to at least one anchor point at all times, through the use of one hook, while moving the second hook around the obstacle to a new anchor point. The adjustable leg straps improve safety to the wearer through a customised fit.

      • Permanently attached, double leg, shock absorbing lanyard with scaffolding hooks
      • Adjustable leg & chest straps
      • Double scaffolding hooks
      • One size fits all

    • Harness Webbing:  
      • 45mm UV-resistant polyester webbing with a minimum breaking load of 2,6 tonnes

      Lanyard Webbing: 
      • 45mm UV-resistant polyester webbing with a minimum breaking load of 2,6 tonnes
      • Lanyard length: 1750mm
      • Lanyard length when shock absorber is fully elongated: 3 450mm

      Chest Strap: 
      • 45mm UV-resistant polyester webbing with a minimum breaking load of 2,6 tonnes

      Buckles:
      • Interlocking, corrosion-resistant steel buckles

      Hooks:
      • Corrosion-resistant steel scaffolding hooks with 50mm gate opening
    • N$598.00

    • Non-Belted Double Scaff Hooks

    • Code: 9114650150
    • In Stock

    • This is an elasticated double leg, shock absorbing lanyard with two Scaffolding hooks and a single Snap hook connector that is engineered to attach to a dorsal D-Ring on a stand-alone, fall arrest harness.

      The elasticated lanyard lifts the hooks off the ground when not in use, reducing the wear and tear caused to hardware when dragged on the ground. It further improves safety to the wearer by reducing the potential of the lanyard being caught in dangerous machinery.

      This lanyard is recommended for those who are required to navigate obstacles whilst working at heights. The double leg lanyard improves safety to the wearer by allowing them to remain attached to at least one anchor point at all times, through the use of one hook, while moving the second hook around the obstacle to a new anchor point.

      The built-in shock absorber is engineered to reduce the total force experienced in a fall to a survivable force of less than 6kN.

      • Elasticated double leg with scaffolding hooks
      • Single leg with snap hook
      • Shock absorber

    • Harness Webbing:  
      • 45mm UV-resistant polyester webbing with a minimum breaking load of 2,6 tonnes

      Lanyard length: 
      • 1750mm when shock absorber is intact
      • 3450mm when shock absorber is fully deployed

      Hooks:
      • Corrosion-resistant steel hooks
      • Scaffolding hooks: 50mm gate opening that can withstand a force of 23kN
      • Snap hook: 20mm gate opening that can withstand a force of 22kN

      Max fall weight:
      • 140kg
    • N$598.00

    • Elasticated Dble Shock Absorb

    • Code: 9114650164
    • In Stock
      • 2 Cargo pockets, one with cellphone division and both with hook and loop closure on flaps
      • 2 back pockets one with hook and loop closure
      • Coin pocket
      • Triple needle stitching on all seams for extra strength
      • Bar tacks on stress points
      • Concealed YKK zip

    • Fabric: VERSATEX 65/35 Polycotton Twill

      Weight: 230 gm2

    • N$597.00

    • Jonsson Cargo Trousers

    • Code: IMCARGO
    • In Stock

      • 25mm reflective tape for increased visibility
      • 25mm reflective tape “X” configuration on the back
      • Chemically treated to repel acid splashes, oil and water
      • Triple needle stitching on all seams for extra strength
      • Concealed YKK zip
      • Side slits for ease of movement
      • Zip guard
      • Bar tacks on all stress points

    • Fabric: 77/23 Polyviscose Twill

      Weight: 230 gm2

    • N$594.00

    • Jonsson Acid Resistant Reflective Work Jacket

    • Code: CJ77JT
    • Out of Stock Online

    • Attractive, soft toe, casual work shoe. The WorkPro is the ideal shoe as casual work footwear, where a clean and uniform look is ideal. The Workpro’s ergonomic design and versatility, as well as its affordable price tag, make this non-safety shoe a certain favourite among hospital, hotel, forecourt, restaurant, retail, cleaning, promotional, event, and front desk staff.

      • Water resistant action leather upper
      • Exceptionally comfortable
      • Breathable and abrasion resistant Taibrelle (equivalent to Cambrelle)
      • Lightweight double density PU sole
      • Highly durable, slip- and oil-resistant outsole
      • Great value for companies looking for a uniform shoe for their staff

    • Materials:

      • Upper: Black, Water Resistant Action Leather Upper
      • Lining: Breathable and Abrasion Resistant Tai-brelle (Equivalent to Cambrelle)

      Eyelet:

      • Black Steel Eyelets

      Sole:

      • Temperature Maximum 90ºC (degrees Celsius)
      • Dual Density Poly Urethane Rebel Sole
      • Inner Sole - Biagioli IBITECH 252 2mm Foam Insole Board
      • Oil and acid resistant Dual Density PU
      • Slip Resistance - Tested to SATRA PM144 1992 and meets these requirements
      • However, care should always be taken on wet or oily surfaces
      • Crack Resistance - Tested to 30,000 flex cycles

      Anti Static Properties:

      • Product is NOT anti-static. If application is life critical additional consultation with product expert is required.Electrical resistance can be significantly changed by flexing, contamination or moisture. Introduction of additional inner sole reduces static resistance
    • N$584.00

    • Rebel Workpro Shoes

    • Code: RE508
    • In Stock

    • Africa’s hardest working boots! The Kontrakta Boot is ISO 20345 and SABS approved. If you need to put safety boots on your contract staff, and are worried that the job might take longer than expected, then these are for you. These safety boots feature a high quality Barton print leather, a steel toe cap and a lightweight and comfortable dual density polyurethane sole.

      • ​High quality, full grain cow leather upper
      • Classic styled, formal boot that doesn’t compromise on industrial safety features
      • EN-ISO 20345 approved carbon steel toe cap
      • Lightweight and comfortable dual density polyurethane sole
      • Ultra comfortable REBEL Safetygear footbed inner sole
      • Taibrelle moisture wicking lining

    • Materials:

      • Upper: Bartan Print Leather Upper
      • Inner Sole: Removable Inner Soles
      • Lining: Breathable and Abrasion Resistant Tai-brelle

      Eyelet:

      • D-Rings

      Sole:

      •  Dual Density Poly-Urethane Sole
      • Temperature Maximum 90ºC (degrees Celsius)
      • Oil Resistant Dual Density PU
      • Slip Resistance - Tested to SATRA PM144 1992 and meets these requirements, however, care should always be taken on wet or oily surfaces
      • Crack Resistance - Tested to 30,000 flex cycles

      Toe Cap:

      • Wide Profile Carbon Steel Toe-Cap
      • Tested to an impact resistance of 200 Joules

      Anti Static Properties:

      • Product is anti static. If application is life critical additional consultation with product expert is required. Electrical resistance can be significantly changed by flexing, contamination or moisture. Introduction of additional inner sole reduces static resistance
    • N$584.00

    • Rebel Kontrakta Boots

    • Affordable,General Purpose Workboots
    • Code: RE128B
    • In Stock
      • High quality, full grain cow leather upper
      • Classic styled, formal boot that doesn’t compromise on industrial safety features
      • EN-ISO 20345 approved carbon steel toe cap
      • Lightweight and comfortable dual density polyurethane sole
      • Ultra comfortable REBEL Safetygear footbed inner sole
      • Taibrelle moisture wicking lining

    • Materials:

      • Upper: Bartan Print Leather Upper
      • Lining: Breathable and Abrasion Resistant Tai-brelle

      Eyelet:

      • D-Rings

      Special Features:

      • Padded Tongue ensures maximum comfort
      • Padded Upper Collar ensures increased comfort

      Sole:

      • Sole resistant to 90ºC (degrees Celsius)
      • Dual Density Poly-Urethane Sole
      • Inner Sole - Removable Inner Soles
      • Temperature Maximum 90ºC (degrees Celsius)
      • Oil Resistant Dual Density PU
      • Slip Resistance - Tested to SATRA PM144 1992 and meets these requirements
      • However, care should always be taken on wet or oily surfaces
      • Crack Resistance - Tested to 30,000 flex cycles

      Toe Cap:

      • Wide Profile Carbon Steel Toe-Cap
      • Tested to an impact resistance of 200 Joules

      Anti Static Properties:

      • Product is anti static. If application is life critical additional consultation with product expert is required. Electrical resistance can be significantly changed by flexing, contamination or moisture. Introduction of additional inner sole reduces static resistance
    • N$584.00

    • Rebel Kontrakta Shoes

    • Affordable,General Purpose Workboots
    • Code: RE128S
    • In Stock
      • Triple needle stitching on all seams for extra strength
      • 25mm reflective tape for increased visibility
      • Half elasticised waistband for comfort
      • Concealed YKK zip
      • Constructed from SABS approved fabric
      • Fabric is chemically treated to resist heat and sparks
      • Bar tacks on all stress points

    • Fabric: 100% Cotton D59

      Weight: 270 gm2

    • N$578.00

    • Jonsson Flame Resistant Reflective Work Trousers

    • Code: CP77PTFR
    • In Stock
      • Brushed cotton fleece
      • Black inner hood
      • Ribbed cuffs and waist
      • Adjustable self-colour draw cord
      • Two large side entry pockets

    • Fabric: 100% Cotton Brushed Fleece

      Weight: 260 gm2

    • N$575.00

    • Jonsson Hoodie

    • Code: HOODIE
To top