A quality chemical, water and heat resistant, anti-penetration workboot. The Chemitrak S3 Boot is ISO 20345 and SABS approved. These specialized workboots have been designed to keep your feet safe in the harshest of conditions. The full grain, high quality S2 (water resistant), black treated waxy cow leather offers high resistance to chemicals, heat, flame, oil and mould.

• Full grain, high quality S2 (water resistant) – black treated waxy cow leather: - high resistance to chemicals, heat, flame, oil and mould
• 100% natural nitrile rubber sole - heat resistant up to 300°C (Degrees Celsius)
• Anti-penetration steel midsole
• Breathable and abrasion resistant blue Taibrella lining
• Wide profile carbon steel toe cap
• Nickel-free D-rings
• Hydroseal waterproof lining

Materials:

• Upper: Full Grain, High Quality S2 Black Waxy Cow Leather: Highly Resistance to Chemicals, Flame, Oil & Mould
• Inner Sole: Biagioli IBITECH 252 2mm Foam Insole Board
• Mid Sole: Anti-penetration steel mid sole
• Lining: Breathable and Abrasion Resistant Tai-brelle (Equivalent to Cambrelle)

Eyelet:

• Nickel-free Eyelet 

Sole:

• 100% Nitrile Rubber Sole – cemented
• Temperature Maximum 300ºC (degrees Celsius)
• Heat and Oil resistant Nitrile Rubber Sole
• Slip Resistance - Tested to SATRA PM144 1992 and meets these requirements
• However, care should always be taken on wet or oily surfaces
• Crack Resistance - Tested to 30,000 flex cycles
• Anti-penetration steel mid sole

Toe Cap:

• Steel Toe Cap - Tested to an impact resistance of 200 Joules

Anti Static Properties:

• Product is anti static. If application is life critical additional consultation with product expert is required. Electrical resistance can be significantly changed by flexing, contamination or moisture. Introduction of additional inner sole reduces static resistance

Chemical Applications:

• Leather coating ensures maximum chemical, flame, mould and water resistance

The Chukka work boot is a robust, stylish, and functional footwear designed for demanding environments. Built with safety and durability in mind, this boot combines high-quality materials and essential safety features, making it an iconic work boot across Africa. Key features of the Chukka boot include:

Key Features:

• 200J Steel Toe Cap: Provides protection against heavy impacts.
• Protective Toe Bumper: Guards against scuffing for extended durability.
• Hi-Viz Reflective Strips: Enhances visibility in low-light environments.
• Material: Genuine leather for long-lasting wear.
• Anti-static: Prevents the buildup of static electricity.
• Shock Absorbent & Slip Resistant Sole: Ensures comfort and safety on different surfaces.
• Oil Resistant Sole: Protects against damage from oils and chemicals.
• Microfiber & Mesh Lining: Offers breathability and comfort.
• Dual Density Polyurethane (PU) Sole: Provides durability and slip resistance.
• Nickel-free D-rings: Safe for individuals with nickel sensitivity.

ISO 20345 Classification (S1): Anti-static, energy absorption in the heel, and resistance to oil and fuel.

Slip Resistance (SRC): Tested for slip resistance on ceramic and metal surfaces with soapy and oily solutions.

Construction: Injection-moulded for enhanced strength and flexibility.

Footbed (Insole): Moulded polyurethane with a taibrelle mesh upper, contoured heel, and arch support for comfort during prolonged wear.

The Chukka boot is available in black and brown, making it versatile for various work environments while ensuring safety and comfort.

The Crazy Horse is a premium slip-on work boot, offering maximum protection and style with a 200J Steel toe cap, toe bumper for added scuff protection, heat resistance up to 300° Celsius, steel midsole for anti-penetration and a high quality full grain Crazy Horse leather upper (suede finish). The Crazy Horse Boot provides excellent comfort with an ultra-thick memory foam platinum foot bed. The Crazy Horse is available in three distinct colour options – black, brown and tan, and is ISO 20345, SABS and NRCS approved.

Material: Leather

Industry: Agriculture, Engineering, Foundries and Smelters, General Applications, Glass Manufacturing, Hospitality, Refineries, Waste disposal, Welders

Technical Feature: 200J Steel toe, Anti-penetration, Anti-static, Genuine leather, Heat resistant 300°, Oil resistant, Shock absorbent, Slip resistant

Materials:

• Upper: Full Grain Crazy Horse Leather
• Footbed: Extra Thick Anti-Static Footbed with Poron Padding
• Inner sole: Biagioli IBTECH 252 2mm Foam Insole Board
• Lining: Breathable and Abrasion Resistant Tai-brelle (Equivalent to Cambrelle)

Sole:

• Dual Density PU/Rubber Heat-Resistant Sole
• Temperature Maximum 300°C (degrees Celsius)
• Oil and acid resistant PU/Rubber
• Slip Resistance – Tested to SATRA PM144 1992 and meets these requirements
• However, care should always be taken on wet or oily surfaces
• Crack Resistance – Tested to 30.000 flex cycles

Toe Cap:

• Tested to an impact resistance of 200 Joules

Toe Guard:

• TPU Anti-scuff Toe Guard

Anti Static Properties:

• Product is anti static. If application is life critical consultation with product expert is required. Electrical resistance can be significantly changed by flexing, contamination or moisture. Introduction of additional inner sole reduces static resistance

The Enduro-Max Shoe merges sports shoe technology with robust protective features, designed for durability and comfort in demanding environments. Featuring a 200J steel toe cap and electrostatic discharge (ESD) properties, this shoe provides essential protection while maintaining comfort for extended wear.

Material: Made from a combination of durable Nubuck leather and breathable mesh, offering long-lasting performance and ventilation.

Steel Toe Cap: Equipped with a 200J steel toe for impact protection.

Electrostatic Discharge (ESD): Protects against electrostatic buildup, preventing shocks in sensitive environments.

Heat Resistance: The Enduro-Max sole is heat resistant up to 300°C, making it suitable for high-temperature work environments.

Anti-Static & Shock Absorbent: Minimizes static build-up and reduces foot fatigue through shock absorption.

Slip & Oil Resistant: Designed for optimal traction on slippery surfaces and protection against oil exposure.

ISO 20345 Approved: Meets international safety standards, ensuring top-tier protection in hazardous work conditions.

This combination of durability, protection, and comfort makes the Enduro-Max Shoe ideal for industrial, construction, or high-heat environments.

The most affordable, quality safety boot! The FX2 Safety Boot is ISO 20345 and SABS approved, and is a high quality and affordable safety boot which is best described as the best hard working economy boot available. This variant features an anti-penetration steel midsole. 

• ​Highly durable full leather upper
• Lightweight dual density polyurethane sole, extremely slip resistant
• Taibrelle moisture wicking lining
• Nickel-free D-rings

Materials:

• Upper: Quality, Durable Tear-Resistant Split Leather Upper
• Lining: Breathable and Abrasion Resistant Tai-brelle

Eyelet:

• Nickel-free D-Rings

Special Features:

• Anti-penetration
• Steel Mid Sole for anti-penetration protection
• Sole resistant to 90ºC (degrees Celsius)
• Padded Tongue ensures maximum comfort
• Padded Upper Collar ensures increased comfort

Sole:

• Temperature Maximum 90ºC (degrees Celsius)
• Dual Density Poly-Urethane Sole
• Inner Sole - Full Removable Inner Soles
• Mid Sole - Steel Mid-sole (Anti-Penetration)
• Oil and acid resistant Dual Density Polyurethane
• Slip Resistance - Tested to SATRA PM144 1992 and meets these requirements. However, care should always be taken on wet or oily surfaces
• Crack Resistance - Tested to 30,000 flex cycles

Toe Cap:

• Steel Toe Cap - Tested to an impact resistance of 200 Joules

Anti Static Properties:

• Product is anti static. If application is life critical additional consultation with product expert is required. Electrical resistance can be significantly changed by flexing, contamination or moisture. Introduction of additional inner sole reduces static resistance

The most affordable, quality safety shoe! The FX2 Safety Shoe is ISO 20345 and SABS approved, and is a high quality and affordable safety shoe which is best described as the best hard working economy shoe available.

• Highly durable full leather upper
• Lightweight dual density polyurethane sole, extremely slip resistant
• Taibrelle moisture wicking lining
• Nickel-free D-rings

Materials:

• Upper: Quality, Durable Tear-Resistant Split Leather Upper
• Lining: Breathable and Abrasion Resistant Tai-brelle

Eyelet:

• Nickel-free D-Rings

Special Features:

• Padded Tongue ensures maximum comfort
• Padded Upper Collar ensures increased comfort

Sole:

• Sole resistant to 90ºC (degrees Celsius)
• Inner Sole - Full Removable Inner Soles
• Dual Density Poly-Urethane SoleTemperature Maximum 90ºC (degrees Celsius)
• Oil and acid resistant Dual Density PU
• Slip Resistance
• However, care should always be taken on wet or oily surfaces
• Crack Resistance - Tested to 30,000 flex cycles

Toe Cap:

• Steel Toe Cap - Tested to an impact resistance of 200 Joules

Anti Static Properties:

• Product is anti static. If application is life critical additional consultation with product expert is required. Electrical resistance can be significantly changed by flexing, contamination or moisture. Introduction of additional inner sole reduces static resistance

The new REBEL Safetygear Platinum Collection offers you the latest safety innovations in safety footwear products that are also built to look genuinely good and offer extreme comfort. The Havoc boot is ISO 20345 approved. This stylish Workboot offers you an easy slip-on solution with supreme comfort. A high quality, premium leather is used, while safety features include steel toe cap, anti-static, oil resistance and heat resistance

Materials:

• Upper: Full Grain, High Quality Waxy Smooth Leather with PU Collar and TPU Back-Counter Reinforcing
• Footbed: Extra Thick Anti-Static Footbed with Poron Padding
• Lining: Breathable and Abrasion Resistant Tai-brelle (Equivalent to Cambrelle)

Eyelets:

• Hexbuttons with Climbing Hooks

Special Features:

• Sole resistant to 300°C

Sole:

• Dual Density PU/Rubber Heat-Resistant Sole 
• Temperature Maximum 300°C
• Oil and acid resistant PU/Rubber
• Slip Resistant – Tested to SATRA PM144 1992 and meets these requirements. However, care should always be taken on wet or oily surface
• Crack Resistant – Tested to 30,000 felx cycles

Toe Cap:

• Tested to an impact resistance of 200 Joules

Anti Static Properties:

• Product is anti static. If application is life critical additional consultation with product expert is required. Electrical resistance can be significantly changed by flexing, contamination or moisture. Introduction of additional inner sole reduces static resistance

Africa’s hardest working boots! The Kontrakta Boot is ISO 20345 and SABS approved. If you need to put safety boots on your contract staff, and are worried that the job might take longer than expected, then these are for you. These safety boots feature a high quality Barton print leather, a steel toe cap and a lightweight and comfortable dual density polyurethane sole.

• ​High quality, full grain cow leather upper
• Classic styled, formal boot that doesn’t compromise on industrial safety features
• EN-ISO 20345 approved carbon steel toe cap
• Lightweight and comfortable dual density polyurethane sole
• Ultra comfortable REBEL Safetygear footbed inner sole
• Taibrelle moisture wicking lining

Materials:

• Upper: Bartan Print Leather Upper
• Inner Sole: Removable Inner Soles
• Lining: Breathable and Abrasion Resistant Tai-brelle

Eyelet:

• D-Rings

Sole:

•  Dual Density Poly-Urethane Sole
• Temperature Maximum 90ºC (degrees Celsius)
• Oil Resistant Dual Density PU
• Slip Resistance - Tested to SATRA PM144 1992 and meets these requirements, however, care should always be taken on wet or oily surfaces
• Crack Resistance - Tested to 30,000 flex cycles

Toe Cap:

• Wide Profile Carbon Steel Toe-Cap
• Tested to an impact resistance of 200 Joules

Anti Static Properties:

• Product is anti static. If application is life critical additional consultation with product expert is required. Electrical resistance can be significantly changed by flexing, contamination or moisture. Introduction of additional inner sole reduces static resistance

• High quality, full grain cow leather upper
• Classic styled, formal boot that doesn’t compromise on industrial safety features
• EN-ISO 20345 approved carbon steel toe cap
• Lightweight and comfortable dual density polyurethane sole
• Ultra comfortable REBEL Safetygear footbed inner sole
• Taibrelle moisture wicking lining

Materials:

• Upper: Bartan Print Leather Upper
• Lining: Breathable and Abrasion Resistant Tai-brelle

Eyelet:

• D-Rings

Special Features:

• Padded Tongue ensures maximum comfort
• Padded Upper Collar ensures increased comfort

Sole:

• Sole resistant to 90ºC (degrees Celsius)
• Dual Density Poly-Urethane Sole
• Inner Sole - Removable Inner Soles
• Temperature Maximum 90ºC (degrees Celsius)
• Oil Resistant Dual Density PU
• Slip Resistance - Tested to SATRA PM144 1992 and meets these requirements
• However, care should always be taken on wet or oily surfaces
• Crack Resistance - Tested to 30,000 flex cycles

Toe Cap:

• Wide Profile Carbon Steel Toe-Cap
• Tested to an impact resistance of 200 Joules

Anti Static Properties:

• Product is anti static. If application is life critical additional consultation with product expert is required. Electrical resistance can be significantly changed by flexing, contamination or moisture. Introduction of additional inner sole reduces static resistance

The new REBEL Safetygear Platinum Collection offers you the latest safety innovations in safety footwear products that are also built to look genuinely good and offer extreme comfort. The Lo-Top shoe is ISO 20345 approved. This stylish safety shoe offers you an easy slip-on solution with supreme comfort. A high quality, premium leather is used, while safety features include steel toe cap, anti-static, oil resistance and heat resistance.

Materials:

• Upper: Quality, Durable Tear-Resistant Microfibre Upper
• Lining: Breathable and Abrasion Resistant Tai-brelle

Eyelet:

• Round Eylets

Special Features:

• Smooth finish microfibre upper
• Sole resistant to 90 °C (degrees Celsius)
• Padded Tongue ensures maximum comfort
• Padded Upper Collar ensures increased comfort

Sole:

• Temperature Maximum 90 °C (degrees Celsius)
• Inner Sole - Full Removable Mesh & EVA Inner Soles
• Dual Density Poly-Urethane Sole
• Oil and acid resistant Dual Density PU
• Slip Resistance – Tested to SATRA PM144 1992 and meets these requirements
• However, care should always be taken on wet or oily surfaces
• Crack Resistance – Tested to 30.000 flex cycles
• Grey & Dark Grey Outer Sole  

Toe Cap:

• Wide Profile Steel Toe-Cap
• Tested to an impact resistance of 200 Joules

Anti-Static Properties:

• Product is anti-static. If application is life critical additional consultation with product expert is required. Electrical resistance can be significantly changed by flexing, contamination or moisture. Introduction of inner sole reduces static resistance

The S3 Technical Boot is ISO 20345 and SABS approved. These specialized workboots have been designed to keep your feet safe in the harshest of conditions. Features of this technical workboot include a full grain, high quality buffalo leather with S3 water resistant coating, a dual density polyurethane sole with anti-penetration, and the widest carbon steel toe cap.

• Full grain high quality buffalo leather with S3 water resistant coating
• Dual density polyurethane REBEL Safetygear sole with anti-penetration
• Widest carbon steel toe cap
• Breathable and abrasion resistant Taibrelle lining
• Fully padded collar and tongue for additional comfort
• Nickel-free D-rings

Materials:

• Upper: Full Grain High Quality Buffalo Leather c/w with S2 Water Resistant Coating
• Lining: Breathable and Abrasion Resistant Tai-brella (Equivalent to Cambrelle)

Eyelet:

• Nickel-free Eyelets

Special Features:

• Hi-Viz “In the Dark” Safety Strip for added visibility

Sole:

• Dual Density Poly Urethane Sole- injection moulded
• Inner Sole - Biagioli IBITECH 252 2mm Foam Insole Board
• Temperature Maximum 90ºC (degrees Celsius)
• Oil and acid resistant Dual Density PU
• Slip Resistance - Tested to SATRA PM144 1992 and meets these requirements
• However, care should always be taken on wet or oily surfaces
• Crack Resistance - Tested to 30,000 flex cycles
• Steel mid sole for anti-penetration
• S2 Water resistant upper

Toe Cap:

• Steel Toe Cap
• Tested to an impact resistance of 200 Joules

Anti Static Properties:

• Product is anti static. If application is life critical additional consultation with product expert is required. Electrical resistance can be significantly changed by flexing, contamination or moisture. Introduction of additional inner sole reduces static resistance

- Poly-cotton canvas is a cotton fabric with a high-density polyester thread weaved into it, making it easier to care for and more hard-wearing than traditional 100% cotton.

- Modern and contoured fit.

- Seven custom utility pockets.

- Triple stitched for reinforcement.

- Bar tacked at stress points.

- Stretch waist for comfort.

- Functional tool loop.

A quality heat resistant safety boot. The Thermotrak Hi is ISO 20345 and SABS approved. The best shoe suited for high temperature applications, this boot features more ankle protection than the Thermotrak Mid, offers a long life nitrile outsole, a max high temperature application of 300°C (degrees Celsius) and a steel shank for torsional rigidity.

• Hygienic removable cushioned inner sole with anti-microbial properties
• Excellent wearing properties - long life Nitrile outsole
• High temperature application max exposure of 300°C
• Taibrelle moisture wicking lining
• Steel shank for torsional rigidity

Materials:

• Upper: Full Grain High Quality Buffalo Leather
• Lining: Breathable and Abrasion Resistant Tai-brelle (Equivalent to Cambrelle)

Special Features:

• Cemented Sole
• No Laces
• Padded Front Flap ensure maximum protection
• Quick Release Velcro straps on sides of flap
• Padded Upper Collar ensures increased comfort

Sole:

• Nitrile Rubber Heat-Resistant Sole – cemented
• Inner Sole - 2mm Anti-Microbial Foam Insole Board complete with Steel Shank and Padded Comfort Zones
• Temperature Maximum 300ºC (degrees Celsius)
• Oil and acid resistant Nitrile Rubber
• Slip Resistance - Tested to SATRA PM144 1992 and meets these requirements. However, care should always be taken on wet or oily surfaces
• Crack Resistance - Tested to 30,000 flex cycles

Toe Cap:

• Steel Toe Cap - Tested to an impact resistance of 200 Joules

Anti Static Properties:

• Product is anti static. If application is life critical additional consultation with product expert is required. Electrical resistance can be significantly changed by flexing, contamination or moisture. Introduction of additional inner sole reduces static resistance

Sports shoe technology in a safety boot. The Velocity Shoe is ISO 20345 and SABS approved. This versatile safety shoe offers superior ventilation and durability, a technically advanced, lightweight dual density polyurethane sole, and the Maxi-grip outer sole offers ideal slip resistance.

• High quality breathable upper combining super ventilation and durability.
• Hi-viz reflective strip for added visibility.
• Rubber Toe-Bump for added scuff protection.
• "Easy-On" heel pull-tag.
• Technically advanced, lightweight PU/Rubber sole.
• Maxi-grip outer sole - ensuring high durability and slip resistance

Materials:

• Upper: High quality breathable upper combining super ventilation and durability, with hi-Visibility “In the Dark” safety strip for added visibility. Rubber Toe-Bump for added scuff protection
• Lining: Breathable and Abrasion Resistant Tai-brelle (equivalent to Cambrelle) “Easy-On” Heel Pull-Tag

Eyelet: 

• Woven Fabric Loops and Nickel-free D-Rings

Sole:

• Technically Advanced, Light weight dual density Polyurethane/Rubber
• Maxi-grip outer sole - ensuring high durability and slip resistance
• Temperature Maximum 300ºC (degrees Celsius)
• Oil and acid resistant PU/Rubber
• Slip Resistance - Tested to SATRA PM144 1992 and meets these requirements
• However, care should always be taken on wet or oily surfaces
• Crack Resistance - Tested to 30,000 flex cycles

Toe Cap:

• Steel Toe Cap - Tested to an impact resistance of 200 Joules

Anti Static Properties:

• Product is anti static. If application is life critical additional consultation with product expert is required.Electrical resistance can be significantly changed by flexing, contamination or moisture. Introduction of additional inner sole reduces static resistance

Attractive, soft toe, casual work shoe. The WorkPro is the ideal shoe as casual work footwear, where a clean and uniform look is ideal. The Workpro’s ergonomic design and versatility, as well as its affordable price tag, make this non-safety shoe a certain favourite among hospital, hotel, forecourt, restaurant, retail, cleaning, promotional, event, and front desk staff.

• Water resistant action leather upper
• Exceptionally comfortable
• Breathable and abrasion resistant Taibrelle (equivalent to Cambrelle)
• Lightweight double density PU sole
• Highly durable, slip- and oil-resistant outsole
• Great value for companies looking for a uniform shoe for their staff

Materials:

• Upper: Black, Water Resistant Action Leather Upper
• Lining: Breathable and Abrasion Resistant Tai-brelle (Equivalent to Cambrelle)

Eyelet:

• Black Steel Eyelets

Sole:

• Temperature Maximum 90ºC (degrees Celsius)
• Dual Density Poly Urethane Rebel Sole
• Inner Sole - Biagioli IBITECH 252 2mm Foam Insole Board
• Oil and acid resistant Dual Density PU
• Slip Resistance - Tested to SATRA PM144 1992 and meets these requirements
• However, care should always be taken on wet or oily surfaces
• Crack Resistance - Tested to 30,000 flex cycles

Anti Static Properties:

• Product is NOT anti-static. If application is life critical additional consultation with product expert is required.Electrical resistance can be significantly changed by flexing, contamination or moisture. Introduction of additional inner sole reduces static resistance

Fabric: 97% Cotton, 3% Spandex

Weight: 220 gm²

Size: 28-42 

Colour: Navy, Putty, Fatigue, Khaki

Triple needle stitching for extra strength

Self-fabric pockets for durability

Large pockets with hook and loop closures

YKK brass zip antique silver plated

All stress points bar tacked for added strength

Coin Pocket

Self-fabric Pockets

Back darts

Reinforced stitching behind side pockets