242 Results

Per Page
    • In Stock
    • This is a work positioning lanyard that forms part of a positioning device system.

      The lanyard has been engineered to support the wearer on elevated vertical surfaces, such as a structure or pole.

      The work positioning lanyard connects a wearer to an anchor point, by looping the lanyard around the anchor point and attaching itself to the side D-rings of the harness waist belt, thereby enabling the wearer to operate from heights, hands-free.

      This must be used in conjunction with a fall arrest system.

      The positioning lanyard has been fitted with PVC protective sleeve to enhance the durability of the product against abrasive materials and improve safety to the wearer.

      • Double snap hooks
      • Adjustable webbing with PVC protector
    • Webbing:  

      • 45mm UV-resistant polyester webbing with a minimum breaking load of 2,6 tonnes

      Lanyard adjustment: 

      • 800mm - 2000mm utilising a floating buckle

      Buckle:

      • Corrosion-resistant steel buckle

      Protective sleeve:

      • PVC material

      Hooks:

      • Corrosion-resistant steel Snap hooks with 20mm gate opening that can withstand a force of 22kN
    • N$420.00
    • Work Positioning Lanyard

    • Code: 9114650160
    • In Stock
    • This is an endless round climbing sling that is used to create an anchor point over a structure that is too large for the fall arrest connector hook.

      The sling is comprised of 38mm seat belt webbing that is encased into 50mm tubular webbing to protect the equipment against abrasive material thereby enhancing the durability of the sling and improving the safety to the user.

      Supplied as a set of two units, the user would wind each sling around the structure, connecting one fall arrest connector hook to one climbing sling.

      It is important to note that the distance from the anchor point (now created on the structure) to the fall arrest body harness anchor point must not exceed 2000mm, i.e. 1750mm (lanyard length) + length of the endless round climbing sling < 2000mm.

      • 38mm seat belt webbing encased into a 50mm tubular webbing
      • Supplied as a set of two
    • Webbing:  

      • 38mm seat belt webbing encased into a 50mm tubular webbing for enhanced durability and improved safety
      • UV-Resistant polyester webbing with a minimum breaking strength of:

                 - Straight – 25kN

                 - Basket – 50kN

                 - Backlash – 20kN

      Length: 

      • 1500mm per sling
    • N$431.00
    • Endless Round Climbing Sling

    • Code: 9114650161
    • In Stock
      • Glad neck shirt with epaulettes
      • Button down front
      • Two front pockets with button closure
      • Pen division
      • Top stitching on armhole for added strength
      • Bar tacks on stress points

       

       

    • Fabric: VERSATEX 65/35 Polycotton Twill

      Weight: 230 gm2

    • N$433.00
    • Jonsson Combat Short Sleeve Shirt

    • Code: CSHIRT
    • In Stock
      • Chest pocket with press stud closure and pen division
      • Large front pocket with zip closure for secure storage
      • Concealed YKK Zip
      • Sleeve pocket in contrasting colour
      • Bar tacks on stress points for extra strength
    • Fabric: VERSATEX 65/35 Polycotton Twill

      Weight: 230 gm2

    • N$437.00
    • Jonsson Two Tone Conti Work Jacket

    • Code: CJ77JTT
    • Out of Stock Online
      • Hip pockets
      • Button front closure
      • Glad neck collar
    • Fabric: VERSATEX 65/35 Polycotton Twill

      Weight: 230 gm2

    • N$438.00
    • Jonsson Industrial Housecoat

    • Code: HCHBR
    • In Stock
      • Crafted from 100% Cotton 
      • Yarn dyed
      • Comes in assorted colours, with checks and stripes (colour and pattern delivered at random) 
    • N$444.00
    • JONSSON Everyday Short Shirts

    • Code: BCSSHIRT
    • In Stock
      • Easy care, non-crease, non-iron fabric
      • Invert pleat detail on front and back
      • YKK zip
    • Fabric: 100% polyester, mini matte

      Weight: 175 gm2

    • N$446.00
    • Jonsson Women's Kick Pleat Skirt

    • Code: OSKIRT
    • In Stock
      • 50mm yellow & silver reflective tape for increased visibility
      • Chest pocket with press stud closure and pen pocket
      • Large front pockets
      • Concealed YKK zip
      • Side slits for ease of movement
      • Bar tacks on stress points
    • Fabric: VERSATEX 65/35 Polycotton Twill

      Weight: 230 gm2

    • N$451.00
    • Jonsson Reflective Conti Work Jackets

    • Code: CJ77HT
    • In Stock
      • Semi-fitted
      • Side slits with bar tacks
      • Specialised and narrowed placket
      • Bioblast Technology
    • Fabric: 100% Cotton Pique Knit

      Weight: 220 gm2

    • N$455.00
    • Jonsson Women's Golfer

    • Code: LGSHT
    • In Stock
      • Breathable
      • Moisture management fabric
      • Side slits with bar tacks
      • Resistant to colour fading
    • Fabric: 100% Polyester Pique Knit

      Weight: 130 gm2

    • N$460.00
    • Jonsson Golfer Two Tone High Visibility

    • Code: JGHSTT
    • In Stock
      • Rib collar
      • Side slits with bar tacks
      • Regular fit for comfort
      • Top stitching on the arm holes and shoulder seams
      • Specialised placket
      • Bioblast technology
    • Fabric: 100% Cotton Pique Knit

      Weight: 220 gm2

    • N$465.00
    • Jonsson The Ultimate Golfer

    • Code: JGSHT
    • In Stock
      • Double breasted unisex jacket
      • Relaxed fit with shaped cuffs
      • Chest pocket with pen division
      • Bartacks on stress points
      • Four hole plastic buttons
      • Mandarin collar
    • Fabric: VERSATEX 65/35 Polycotton Twill

      Weight: 230 gm2

    • N$484.00
    • Jonsson Chef Jacket Short Sleeve

    • Code: KJKTS
    • In Stock
    • - Poly-cotton canvas is a cotton fabric with a high-density polyester thread weaved into it, making it easier to care for and more hard-wearing than traditional 100% cotton.

      - Modern and contoured fit.

      - Seven custom utility pockets.

      - Triple stitched for reinforcement.

      - Bar tacked at stress points.

      - Stretch waist for comfort.

      - Functional tool loop.

    • N$549.00
    • REBEL Tech Gear Shorts

    • Colour in Gun-Metal-Grey or Desert-Dust-Beige
    • Code: REBEL_TGSHORTS
    • In Stock
      • Triple Needle Posting for extra strength
      • Back Pleat
      • Extra length curved hem
      • Two chest pockets with hook and loop closure
      • Concealed inner chest pocket
      • Pen division
      • Enzyme wash for rugged, worn-in look
      • Bar tacks on stress points for extra strength
    • Fabric: 100% Cotton Twill

      Weight: 135 gm2

    • N$550.00
    • Jonsson Legendary Short Sleeve Shirt

    • Code: LEGESSS
    • In Stock
      • Extra length garment with back slit
      • Two large front pockets
      • Chest pocket with press stud closure and pen division
      • Concealed press stud front
      • Bar tacks on stress points for extra strength
    • Fabric: VERSATEX 65/35 Polycotton Twill

      Weight: 230 gm2

    • N$565.00
    • Jonsson Dustcoat

    • Code: DC99
    • In Stock
      • Double back pleats
      • Button down front
      • Two front pockets with hook and loop closure
      • Extra length curved hem
      • Triple needle stitching on all seams for extra strength
      • Bar tacks on stress points
    • Fabric: VERSATEXLite 65/35 Polycotton Twill

      Weight: 135 gm2

    • N$565.00
    • Jonsson Short Sleeve Shirt

    • Code: IMSHIRT
    • In Stock
      • Flat front with pin tuck detail
      • Large belt loops for security belt
      • Two deep slant pockets and one back pocket
      • Two cargo pockets with button down closure
      • Concealed YKK Zip
      • Triple needle stitching on back rise and inner leg for extra strength
      • Elasticised hem
    • Fabric: VERSATEX 65/35 Polycotton Twill

      Weight: 230 gm2

    • N$587.00
    • Jonsson Combat Trousers

    • Code: CPANT
    • In Stock
      • 50mm yellow & silver reflective tape for increased visibility
      • Triple needle stitching for extra strength
      • Elasticated back waistband
      • Concealed YKK zip
      • Two deep slant pockets with self fabric pocket bags
      • Ruler pocket
      • Industrial wash
      • Bar tacks on stress point
      • Back pocket
    • Fabric: 100% Cotton Twill

      Weight: 240 gm2

    • N$591.00
    • Jonsson 100% Cotton Reflective Work Trousers

    • Code: CP87HT
    • In Stock
      • 25mm reflective tape for increased visibility
      • 25mm reflective tape “X” configuration on the back
      • Chemically treated to repel acid splashes, oil and water
      • Triple needle stitching on all seams for extra strength
      • Concealed YKK zip
      • Side slits for ease of movement
      • Zip guard
      • Bar tacks on all stress points

    • Fabric: 77/23 Polyviscose Twill

      Weight: 230 gm2

    • N$593.50
    • Jonsson Acid Resistant Reflective Work Jacket

    • Code: CJ77JT
    • In Stock
    • This is a standard harness with non-specialised features and is recommended for those who need to navigate obstacles while working at heights. The double leg lanyard improves safety to the wearer by allowing them to remain attached to at least one anchor point at all times, through the use of one hook, while moving the second hook around the obstacle to a new anchor point. The adjustable leg straps improve safety to the wearer through a customised fit.

      • Permanently attached, double leg, shock absorbing lanyard with scaffolding hooks
      • Adjustable leg & chest straps
      • Double scaffolding hooks
      • One size fits all
    • Harness Webbing:  

      • 45mm UV-resistant polyester webbing with a minimum breaking load of 2,6 tonnes

      Lanyard Webbing: 

      • 45mm UV-resistant polyester webbing with a minimum breaking load of 2,6 tonnes
      • Lanyard length: 1750mm
      • Lanyard length when shock absorber is fully elongated: 3 450mm

      Chest Strap: 

      • 45mm UV-resistant polyester webbing with a minimum breaking load of 2,6 tonnes

      Buckles:

      • Interlocking, corrosion-resistant steel buckles

      Hooks:

      • Corrosion-resistant steel scaffolding hooks with 50mm gate opening
    • N$598.00
    • Non-Belted Double Scaff Hooks

    • Code: 9114650150
    • In Stock
    • This is an elasticated double leg, shock absorbing lanyard with two Scaffolding hooks and a single Snap hook connector that is engineered to attach to a dorsal D-Ring on a stand-alone, fall arrest harness.

      The elasticated lanyard lifts the hooks off the ground when not in use, reducing the wear and tear caused to hardware when dragged on the ground. It further improves safety to the wearer by reducing the potential of the lanyard being caught in dangerous machinery.

      This lanyard is recommended for those who are required to navigate obstacles whilst working at heights. The double leg lanyard improves safety to the wearer by allowing them to remain attached to at least one anchor point at all times, through the use of one hook, while moving the second hook around the obstacle to a new anchor point.

      The built-in shock absorber is engineered to reduce the total force experienced in a fall to a survivable force of less than 6kN.

      • Elasticated double leg with scaffolding hooks
      • Single leg with snap hook
      • Shock absorber
    • Harness Webbing:  

      • 45mm UV-resistant polyester webbing with a minimum breaking load of 2,6 tonnes

      Lanyard length: 

      • 1750mm when shock absorber is intact
      • 3450mm when shock absorber is fully deployed

      Hooks:

      • Corrosion-resistant steel hooks
      • Scaffolding hooks: 50mm gate opening that can withstand a force of 23kN
      • Snap hook: 20mm gate opening that can withstand a force of 22kN

      Max fall weight:

      • 140kg
    • N$598.00
    • Elasticated Dble Shock Absorb

    • Code: 9114650164
    • In Stock
    • This is a double leg, shock absorbing lanyard with two scaffolding hooks and a single snap hook connector that is engineered to attach to a dorsal D-ring on a stand-alone, fall arrest harness.

      This lanyard is recommended for those who are required to navigate obstacles whilst working at heights. The double leg lanyard improves safety to the wearer by allowing them to remain attached to at least one anchor point at all times, through the use of one hook, while moving the second hook around the obstacle to a new anchor point.

      The built-in shock absorber is engineered to reduce the total force experienced in a fall to a survivable force of less than 6kN.

      • Double leg with scaffolding hooks
      • Single leg with snap hook
      • Shock absorber
    • Harness Webbing:  

      • 45mm UV-resistant polyester webbing with a minimum breaking load of 2,6 tonnes

      Lanyard length: 

      • 1750mm (when shock absorber is intact)
      • 3450mm when shock absorber is fully deployed

      Hooks:

      • Corrosion-resistant steel hooks
      • Scaffolding hooks: 50mm gate opening that can withstand a force of 23kN
      • Snap hook: 20mm gate opening that can withstand a force of 22kN

      Max. fall weight:

      • 140kg

       

       

       

    • N$599.00
    • Double Shock Absorbing Lanyard

    • Code: 9114650162
    • In Stock
      • Acrylic for durability and easy care
      • Spandex in hem for better fit
      • Anti-pill
    • Fabric: 100% Acrylic

      Weight: 12 Gauge

    • N$600.00
    • Jonsson Men's Sleeveless Pullover

    • Code: OPVRSS
    • In Stock
      • Triple needle stitching on all seams
      • Indigo open ended denim
      • Two large back pockets
      • Concealed brass YKK zip
      • Industrial wash
    • Fabric: 93% Cotton, 5% Polyester, 2% Viscose

      Weight: 340,19 g

    • N$606.00
    • Jonsson Super Strong Work Jeans 100% Cotton

    • Code: MJEA804
    • In Stock
      • 50mm yellow & silver reflective tape for increased visibility
      • Concealed brass YKK zip
      • Industrial wash
      • open-ended ended denim
      • Triple needle stitching for extra strength
      • Two large back pockets
    • Fabric: 93% Cotton, 5% Polyester, 2% Viscose

      Weight: 340,19 g

    • N$645.00
    • Jonsson Super Strong Work Jeans with Reflective Tape 100% Cotton

    • Code: MJ804HT
    • In Stock
      • Pocket flap with pen division and button closure
      • Semi-fitted with back darts
      • Industrial wash
      • Longer length
    • Fabric: 100% Cotton Twill

      Weight: 135 gm2

    • N$645.00
    • Jonsson Women's Short Sleeve Shirt

    • Code: LSSBLS
    • In Stock
      • Single pleated front
      • Two deep slant pockets with self fabric pocket bags
      • Back welt pocket with button closure
      • Double needle posting on inner leg and back rise
      • Turn ups
      • YKK brass zip
      • Bar tacks on stress points
    • Fabric: VERSATEX 65/35 Polycotton Twill

      Weight: 230 gm2

    • N$655.00
    • Jonsson Men's Chinos

    • Code: OCHNOP
    • In Stock
    • This is a belted harness with non-specialised features and is recommended
      for those who need to navigate obstacles while working at heights. The
      double leg lanyard improves safety to the wearer by allowing them to remain
      attached to at least one anchor point at all times, through the use of one hook,
      while moving the second hook around the obstacle to a new anchor point. The
      adjustable leg straps improve safety to the wearer through a customised fit.
      The adjustable shoulder straps and waist buckle provide enhanced comfort
      to the wearer.

      • Permanently attached, double leg, shock absorbing lanyard with scaffolding hooks
      • Adjustable shoulder, leg, waist & chest straps
      • One size fits all
      • Double scaffolding hooks

       

    • Harness Webbing:

      • 45mm UV-resistant polyester webbing with a minimum breaking load of 2,6 tonnes

      Lanyard Webbing:

      • 45mm UV-resistant polyester webbing with a minimum breaking load of 2,6 tonnes
      • Lanyard length: 1750mm
      • Lanyard length when shock absorber is fully elongated: 3 450mm

      Chest Strap:

      • 45mm UV-resistant polyester webbing with a minimum breaking load of 2,6 tonnes

       

    • N$660.00
    • Belted Double Scaff

    • Code: 9114650154
    • In Stock
      • 50mm yellow & silver reflective tape for increased visibility
      • Chest pocket with press stud closure and pen pocket
      • Large front pockets
      • Concealed YKK zip
      • Side slits for ease of movement
      • Industrial wash
      • Bar tacks on stress points
      • Triple needle stitching for extra strength
    • Fabric: 100% Cotton Twill

      Weight: 240 gm2

    • N$667.00
    • Jonsson Reflective 100% Cotton Work Jacket

    • Code: CJ87HT
    • In Stock
    • Fabric: 97% Cotton, 3% Spandex

      Weight: 220 gm²

      Size: 28-42 

      Colour: Navy, Putty, Fatigue, Khaki

      Triple needle stitching for extra strength

      Self-fabric pockets for durability

      Large pockets with hook and loop closures

      YKK brass zip antique silver plated

      All stress points bar tacked for added strength

      Coin Pocket

      Self-fabric Pockets

      Back darts

      Reinforced stitching behind side pockets

    • N$679.00
    • Ripstop Multi-Pocket Shorts

    • Hard working, durable stretch shorts made from ripstop fabric for durability
    • Code: SA1706
    • Out of Stock Online
    • This is a standard harness with non-specialised features and is recommended for those who need to navigate obstacles while working at heights. The double leg lanyard improves safety to the wearer by allowing them to remain attached to at least one anchor point at all times, through the use of one hook, while moving the second hook around the obstacle to a new anchor point. The adjustable leg straps improve safety to the wearer through a customised fit.  

      The harness comes standard with a suspension trauma prevention strap that can be deployed in the event of fall, providing the wearer with a standing step to maintain healthy blood flow whilst awaiting rescue.

      • Permanently attached double leg, shock absorbing lanyard, with scaffolding hooks
      • Adjustable leg and chest straps
      • Standing step
    • Harness Webbing:  

      • 45mm UV-resistant polyester webbing with a minimum breaking load of 2,6 tonnes

      Lanyard Webbing: 

      • 45mm UV-resistant polyester webbing with a minimum breaking load of 2,6 tonnes
      • Lanyard length: 1 750mm 
      • Lanyard length when shock absorber is fully elongated: 3 450mm 

      Chest Strap: 

      • 45mm UV-resistant polyester webbing with a minimum breaking load of 2,6 tonnes

      Buckles:

      • Interlocking, corrosion-resistant steel buckles

      Hooks:

      • Corrosion-resistant steel scaffolding hooks with 50mm gate opening

       

       

    • N$681.00
    • Non-Belted Double Scaff With

    • Code: 9114650151
    • In Stock
      • 2 Cargo pockets, one with cellphone division and both with hook and loop closure on flaps
      • 2 back pockets one with hook and loop closure
      • Coin pocket
      • Triple needle stitching on all seams for extra strength
      • Bar tacks on stress points
      • Concealed YKK zip
    • Fabric: VERSATEX 65/35 Polycotton Twill

      Weight: 230 gm2

    • N$695.00
    • Jonsson Cargo Trousers

    • Code: IMCARGO
    • In Stock
      • Pocket flap with pen division and button closure
      • Semi fitted with back darts
      • Industrial wash
      • Roll up sleeve with tabs
      • Longer length
    • Fabric: 100% Cotton

      Weight: 135 gm2

    • N$706.00
    • Jonsson Women's Long Sleeve Shirt

    • Code: LLSBLS
    • In Stock
      • Triple needle stitching on all seams for extra strength
      • 25mm reflective tape for increased visibility
      • Half elasticised waistband for comfort
      • Concealed YKK zip
      • Constructed from SABS approved fabric
      • Fabric is chemically treated to resist heat and sparks
      • Bar tacks on all stress points
    • Fabric: 100% Cotton D59

      Weight: 270 gm2

    • N$706.00
    • Jonsson Flame Resistant Reflective Work Trousers

    • Code: CP77PTFR
    • In Stock
      • Turtle neck with 1/4 zip closure
      • Ribbed collar, cuffs and waist
      • YKK zip with puller
      • Anti-pill
    • Fabric: 100% Acrylic

      Weight: 5 Gauge

    • N$728.00
    • Jonsson Jersey 1/4 Zip

    • Code: WR033
    • In Stock
    • This is an adjustable double leg, shock absorbing lanyard with two Scaffolding hooks and a single screw gate carabineer that is engineered to attach to a dorsal D-Ring on a stand-alone, fall arrest harness.

      This lanyard is recommended for those who are required to navigate obstacles whilst working at heights. The double leg lanyard improves

      safety to the wearer by allowing the wearer to remain attached to at least one anchor point at all times through the use of one hook, while moving the second hook around the obstacle to a new anchor point.

      The adjustable legs allow the wearer to reduce the overall length of the lanyard, thereby reducing the fall distance and following best working-at-heights practice.  The built-in shock absorber is engineered to reduce the total force experienced in a fall to a survivable force of less than 6kN.

      • Adjustable double leg with scaffolding hooks
      • Single leg with screw gate carabineer
      • Shock absorber
    • Harness Webbing:  

      • 25mm UV-resistant polyester webbing with a minimum breaking load of 2,6 tonnes

      Lanyard length: 

      • 1400mm  – 1750mm (when shock absorber is intact)
      • 3450mm when shock absorber is fully deployed

      Buckles:

      • Corrosion-resistant steel buckles

      Hooks:

      • Corrosion-resistant steel scaffolding hooks: 50mm gate opening that can withstand a force of 23kN

      Carabineer:

      • Corrosion-resistant steel screw gate carabineer: 23mm gate opening that can withstand a force of 23kN
    • N$734.00
    • Adjustable Double Shock Absorb

    • Code: 9114650163
To top