241 Results

Per Page
    • In Stock

    • This is a double leg, shock absorbing lanyard with two scaffolding hooks and a single snap hook connector that is engineered to attach to a dorsal D-ring on a stand-alone, fall arrest harness.

      This lanyard is recommended for those who are required to navigate obstacles whilst working at heights. The double leg lanyard improves safety to the wearer by allowing them to remain attached to at least one anchor point at all times, through the use of one hook, while moving the second hook around the obstacle to a new anchor point.

      The built-in shock absorber is engineered to reduce the total force experienced in a fall to a survivable force of less than 6kN.

      • Double leg with scaffolding hooks
      • Single leg with snap hook
      • Shock absorber

    • Harness Webbing:  
      • 45mm UV-resistant polyester webbing with a minimum breaking load of 2,6 tonnes

      Lanyard length: 
      • 1750mm (when shock absorber is intact)
      • 3450mm when shock absorber is fully deployed

      Hooks:
      • Corrosion-resistant steel hooks
      • Scaffolding hooks: 50mm gate opening that can withstand a force of 23kN
      • Snap hook: 20mm gate opening that can withstand a force of 22kN

      Max. fall weight:
      • 140kg

       

       

       

    • N$599.00

    • Double Shock Absorbing Lanyard

    • Code: 9114650162
    • In Stock

    • The DW-J54-ANG-S conforms to SANS 434 for fit and make. All zips are concealed brass YKK. Fully triple stitched shoulders, arm holes, side seams, in-leg and back rise. The jacket has a mitred breast pocket with V-Flap with ruler pocket. Double needled yokes. The suit has 50mm lime silver lime reflective tape around the arms, legs, strips above the breast pocket and a cross on the back. This product is manufactured and distributed as suit jackets and suit pants. J54 fabric is recommended for heavy duty garments and overalls. 100% cotton with a mass of 220/230 g/m2.

    • N$770.00

    • Dromex 2Pc Overall with Reflective Tape

    • Code: DW-J54RB
    • In Stock

    • Promax is applicable for:

      • asbestos removal
      • accident attendance
      • fibre exposure
      • food
      • electronic assembly
      • pharmaceutical environments
      • painting and spraying
    • N$114.00

    • Dromex Disposable Overall

    • Dromex Promax is a high quality disposable overall.
    • Code: PROMAX
    • In Stock
    • N$

    • Dromex Mop Caps

    • Dromex disposable single elasticated 12gsm mop cap.
    • Code: MOPC-S
    • In Stock

    • Dromex PVC storm suit is impermeable, extra heavy duty storm wear comprising of jackets and bib pants. Jacket has a fixed hood, double snap closure at the neck and with internal storm cuffs. Welded seams for comfort. PVC coated material, 450gsm (0.35mm) with electro-welded seams and adjustable webbing suspender braces.

    • N$

    • Dromex Oilskin Jacket With Hood

    • Code: JH-SM
    • In Stock

    • Dromex PVC storm suit is impermeable, extra heavy duty storm wear comprising of jackets and bib pants. Jacket has a fixed hood, double snap closure at the neck and with internal storm cuffs. Welded seams for comfort. PVC coated material, 450gsm (0.35mm) with electro-welded seams and adjustable webbing suspender braces.

    • N$

    • Dromex Oilskin Trousers

    • Code: BP-SM
    • In Stock

    • Dromex Budget Conti Suit with Triple Stitch Shoulders, Armholes, In Leg and Back Rise, Dromex Label on centre neck, Dromex Side Winder on Left Breast Pocket and Left Hip Pocket. Left Breast Pocket with pen division and V Flap concealed Press Stud. Aluminium Zips.

    • N$169.00

    • Dromex Polycotton Overall

    • Code: DW-6535-S
    • In Stock
    • N$176.00

    • Dromex PVC Rainsuit

    • Dromex 2 piece PVC rain suits with hood, zip and storm flap.
    • Code: PRS70
    • In Stock
    • N$145.00

    • Dromex Rubberised Raincoat

    • Dromex rubberized rain coats that are calf length that have a hood, zip and storm flap
    • Code: RUBCOAT
    • In Stock

    • Suitable for use with:

      • Dromex denims
      • Warehouse use
      • Gardening
      • Construction and janitorial environments
    • N$122.00

    • Dromex T-Shirt

    • Dromex 100% combed cotton +-160gsm tshirts are made for comfort.
    • Code: DW-TSHIRT
    • In Stock

    • This is an elasticated double leg, shock absorbing lanyard with two Scaffolding hooks and a single Snap hook connector that is engineered to attach to a dorsal D-Ring on a stand-alone, fall arrest harness.

      The elasticated lanyard lifts the hooks off the ground when not in use, reducing the wear and tear caused to hardware when dragged on the ground. It further improves safety to the wearer by reducing the potential of the lanyard being caught in dangerous machinery.

      This lanyard is recommended for those who are required to navigate obstacles whilst working at heights. The double leg lanyard improves safety to the wearer by allowing them to remain attached to at least one anchor point at all times, through the use of one hook, while moving the second hook around the obstacle to a new anchor point.

      The built-in shock absorber is engineered to reduce the total force experienced in a fall to a survivable force of less than 6kN.

      • Elasticated double leg with scaffolding hooks
      • Single leg with snap hook
      • Shock absorber

    • Harness Webbing:  
      • 45mm UV-resistant polyester webbing with a minimum breaking load of 2,6 tonnes

      Lanyard length: 
      • 1750mm when shock absorber is intact
      • 3450mm when shock absorber is fully deployed

      Hooks:
      • Corrosion-resistant steel hooks
      • Scaffolding hooks: 50mm gate opening that can withstand a force of 23kN
      • Snap hook: 20mm gate opening that can withstand a force of 22kN

      Max fall weight:
      • 140kg
    • N$598.00

    • Elasticated Dble Shock Absorb

    • Code: 9114650164
    • In Stock

    • This is an endless round climbing sling that is used to create an anchor point over a structure that is too large for the fall arrest connector hook.

      The sling is comprised of 38mm seat belt webbing that is encased into 50mm tubular webbing to protect the equipment against abrasive material thereby enhancing the durability of the sling and improving the safety to the user.

      Supplied as a set of two units, the user would wind each sling around the structure, connecting one fall arrest connector hook to one climbing sling.

      It is important to note that the distance from the anchor point (now created on the structure) to the fall arrest body harness anchor point must not exceed 2000mm, i.e. 1750mm (lanyard length) + length of the endless round climbing sling < 2000mm.

      • 38mm seat belt webbing encased into a 50mm tubular webbing
      • Supplied as a set of two

    • Webbing:  
      • 38mm seat belt webbing encased into a 50mm tubular webbing for enhanced durability and improved safety
      • UV-Resistant polyester webbing with a minimum breaking strength of:

                 - Straight – 25kN

                 - Basket – 50kN

                 - Backlash – 20kN

      Length: 
      • 1500mm per sling
    • N$431.00

    • Endless Round Climbing Sling

    • Code: 9114650161
    • Out of Stock Online

    • The CI-series is the ideal backdrop for your company or club. With large surfaces, it offers perfect opportunities for personalisation. This is how you can combine the inimitable Engelbert Strauss style with your individual team look.

      The fleece jacket CI made of extra lightweight and soft microfleece, this will certainly become your favourite in the team outfit. The warm and comfortable properties of fleece supplement the CI variant with the comfortable sleeve lining that makes it very easy to put the garment on without 'braking'. Very practical, especially when several layers are worn over one another!

      Super lightweight and soft microfleece jacket

      • Warming, breathable and wind-repellent
      • 2 deep side pockets with zip
      • 2 spacious, open inside pockets
      • Continuous zip with chin protection
      • Comfortable sleeve lining to make it easy to put on
      • Specially designed for personalisation: few seams, large surfaces and a subtle design
      • Upper material: Synthetic
      • Material function: Wind-repellent, Breathable, Heat insulating
      • Pockets / Storage, Inner pocket, Slanting pockets
      • Functional layer                : Warmth layer
      • Collar: High collar, Chin protection, Fleece inside collar

       

      Material: Shell 100% Polyester (approx. 200 g/m²), Lining 100% Polyester

      Care instructions: Machine wash 30 °C, Do not bleach, Tumble dry, low temperature, Do not iron, Do Not Dry clean

    • N$

    • Engelbert Strauss Jacket Fleece CI

    • Code: ESTRAUSS_FLEECECI
To top