The S3 Technical Boot is ISO 20345 and SABS approved. These specialized workboots have been designed to keep your feet safe in the harshest of conditions. Features of this technical workboot include a full grain, high quality buffalo leather with S3 water resistant coating, a dual density polyurethane sole with anti-penetration, and the widest carbon steel toe cap.

• Full grain high quality buffalo leather with S3 water resistant coating
• Dual density polyurethane REBEL Safetygear sole with anti-penetration
• Widest carbon steel toe cap
• Breathable and abrasion resistant Taibrelle lining
• Fully padded collar and tongue for additional comfort
• Nickel-free D-rings

Materials:

• Upper: Full Grain High Quality Buffalo Leather c/w with S2 Water Resistant Coating
• Lining: Breathable and Abrasion Resistant Tai-brella (Equivalent to Cambrelle)

Eyelet:

• Nickel-free Eyelets

Special Features:

• Hi-Viz “In the Dark” Safety Strip for added visibility

Sole:

• Dual Density Poly Urethane Sole- injection moulded
• Inner Sole - Biagioli IBITECH 252 2mm Foam Insole Board
• Temperature Maximum 90ºC (degrees Celsius)
• Oil and acid resistant Dual Density PU
• Slip Resistance - Tested to SATRA PM144 1992 and meets these requirements
• However, care should always be taken on wet or oily surfaces
• Crack Resistance - Tested to 30,000 flex cycles
• Steel mid sole for anti-penetration
• S2 Water resistant upper

Toe Cap:

• Steel Toe Cap
• Tested to an impact resistance of 200 Joules

Anti Static Properties:

• Product is anti static. If application is life critical additional consultation with product expert is required. Electrical resistance can be significantly changed by flexing, contamination or moisture. Introduction of additional inner sole reduces static resistance

• PVC uppers and waterproof gusset for optimum abrasion resistance
• Waterproof gusset preventing water penetration
• Available with and without a steel toe cap
• PVC / Nitrile sole for durability and protection against fats, oils and chemicals
• The cleated sole design provides slip resistance and maximum soil release
• Nylon liner allows for easy cleaning and quick drying resulting in maximum hygiene
• Optimal toe-spring for walking and kneeling

Optional Extras:

• Contour moulded cushion insole to enhance comfort and reduce fatigue

Upper:

• PVC upper for excellent water resistance and durability
• 5 Pair eyelit lace-up

Sole:

• Nitrile PVC sole for enhanced resistance against acids, oils and chemicals as well as uneven and harsh terrain
• The cleated sole provides SRA slip-resistance rating and maximum soil release

Toe Cap:

• Steel toe cap with impact resistance of 200 joules (EN 12568)

Lining:

• Nylon / Polyester fine knit liner for easy cleaning and quick drying enabling maximum hygiene

Last:

• Designed with optimal toe spring for walking and kneeling

• PU Injected Molded sole
• Canvas Upper

Boot Spitzkoppe STC – Namsafe (Sizes S03 to S12)

Step into comfort, durability, and safety with the Namsafe Spitzkoppe STC Boots, available in sizes S03 to S12. Designed for demanding work environments, these rugged boots provide superior protection, support, and slip resistance for professionals in construction, mining, agriculture, and industrial sectors. With a focus on safety and comfort, the Spitzkoppe STC is your reliable choice for all-day wear.

Experience reliable protection and comfort with the Namsafe Spitzkoppe STC Boots, engineered for safety, durability, and performance across all demanding work environments.

Features and Benefits:

• Safety Certified: Meets industry standards for workplace safety with reinforced toe caps and anti-slip soles.

• Durable Construction: High-quality materials provide long-lasting wear in tough environments.

• Comfort Fit: Ergonomically designed with padded collars and breathable linings for all-day comfort.

• Slip & Shock Resistant: Outsoles engineered to provide excellent grip and reduce fatigue.

• Wide Size Range: Available in sizes S03 to S12, ensuring the perfect fit for every worker.

• Versatile Use: Ideal for construction sites, industrial facilities, outdoor work, and general heavy-duty use.

• Sizes Available: S03, S04, S05, S06, S07, S08, S09, S10, S11, S12

• Material: Premium leather and synthetic combination

• Colour: Typically black with durable accents

• Safety Features: Reinforced toe cap, slip-resistant outsole, shock-absorbing midsole

Africa’s hardest working boots! The Kontrakta Boot is ISO 20345 and SABS approved. If you need to put safety boots on your contract staff, and are worried that the job might take longer than expected, then these are for you. These safety boots feature a high quality Barton print leather, a steel toe cap and a lightweight and comfortable dual density polyurethane sole.

• ​High quality, full grain cow leather upper
• Classic styled, formal boot that doesn’t compromise on industrial safety features
• EN-ISO 20345 approved carbon steel toe cap
• Lightweight and comfortable dual density polyurethane sole
• Ultra comfortable REBEL Safetygear footbed inner sole
• Taibrelle moisture wicking lining

Materials:

• Upper: Bartan Print Leather Upper
• Inner Sole: Removable Inner Soles
• Lining: Breathable and Abrasion Resistant Tai-brelle

Eyelet:

• D-Rings

Sole:

•  Dual Density Poly-Urethane Sole
• Temperature Maximum 90ºC (degrees Celsius)
• Oil Resistant Dual Density PU
• Slip Resistance - Tested to SATRA PM144 1992 and meets these requirements, however, care should always be taken on wet or oily surfaces
• Crack Resistance - Tested to 30,000 flex cycles

Toe Cap:

• Wide Profile Carbon Steel Toe-Cap
• Tested to an impact resistance of 200 Joules

Anti Static Properties:

• Product is anti static. If application is life critical additional consultation with product expert is required. Electrical resistance can be significantly changed by flexing, contamination or moisture. Introduction of additional inner sole reduces static resistance

Upper: Breathable canvas | 10 pair eyelet lace-up

Lining: Needle-fi bred vamp lining for excellent perspiration absorbency | Polyester and viscose top sock for additional comfort

Toe cap: Not available

Sole: Single Density PU (Heat-resistant up to 95°C)

The Radebe boasts everything that you could possibly want from a mining boot but has several new features that puts it above the rest. Equipped with a TPU sole, it features increased elasticity and improved abrasion resistance for the harshest and most unwelcoming surface conditions, while the addition of a reflective strip adds all-important increased visibility. For so dangerous an occupation as mining only the very best will do, and you don’t get much better than the Radebe.

• Extreme Abrasion Resistance
• Ultra-Slip Resistant
• Increased Resistance to Oil & Grease
• CE EN ISO 20345 Approved
• Reflective Strips
• genuine Split Buffalo Leather Upper
• Lightweight and flexible Dual Density PU/TPU Sole
• Steel Toe Cap with Impact Protection of 200 joules
• Shock Absorbent Heel
• Removable Anti-Static Inner Soles
• Heat Resistant To 90º Celsius
• Wider Cut for Added Comfort
• Stylish Design

The most affordable, quality safety boot! The FX2 Safety Boot is ISO 20345 and SABS approved, and is a high quality and affordable safety boot which is best described as the best hard working economy boot available. This variant features an anti-penetration steel midsole. 

• ​Highly durable full leather upper
• Lightweight dual density polyurethane sole, extremely slip resistant
• Taibrelle moisture wicking lining
• Nickel-free D-rings

Materials:

• Upper: Quality, Durable Tear-Resistant Split Leather Upper
• Lining: Breathable and Abrasion Resistant Tai-brelle

Eyelet:

• Nickel-free D-Rings

Special Features:

• Anti-penetration
• Steel Mid Sole for anti-penetration protection
• Sole resistant to 90ºC (degrees Celsius)
• Padded Tongue ensures maximum comfort
• Padded Upper Collar ensures increased comfort

Sole:

• Temperature Maximum 90ºC (degrees Celsius)
• Dual Density Poly-Urethane Sole
• Inner Sole - Full Removable Inner Soles
• Mid Sole - Steel Mid-sole (Anti-Penetration)
• Oil and acid resistant Dual Density Polyurethane
• Slip Resistance - Tested to SATRA PM144 1992 and meets these requirements. However, care should always be taken on wet or oily surfaces
• Crack Resistance - Tested to 30,000 flex cycles

Toe Cap:

• Steel Toe Cap - Tested to an impact resistance of 200 Joules

Anti Static Properties:

• Product is anti static. If application is life critical additional consultation with product expert is required. Electrical resistance can be significantly changed by flexing, contamination or moisture. Introduction of additional inner sole reduces static resistance