Adventure wear workboots designed to go anywhere. Our Adventure wear range offers you high performance outdoor styling. The Expedition Hi is ISO 20345 and SABS approved. This safety boot features a quality Nubuck leather upper, a rubber toe-bumper, an EVA/rubber and anti-penetration nail guard sole, and a steel shank for torsional rigidity.

• ​Nubuck Leather upper
• Rubber toe-bumper for added scuff protection
• EVA/Rubber outsole for high durability & comfort
• Tailbrelle moisture wicking lining
• Steel shank for torsional rigidity
• Hygienic removable cushioned innersole with anti-microbial properties

Materials:

• Upper: High quality Nu-Buck Leather Upper
• Inner Sole: Padded Anti-microbial Foam with Anti-Static Properties / Steel Mid-sole (Anti-penetration)
• Lining: Breathable and Abrasion Resistant lining

Eyelet:

• Fabric Loops and Polyurethane Rings

Special Features:

• Padded Inner Sole allows greater comfort
• Steel Mid Sole for anti-penetration
• Upper has S2 Water-resistant property
• Sole offers exceptional gripping qualities
• EVA Rubber sole designed to ensure high durability
• Padded Bellows Tongue ensure additional comfort
• Padded Upper Collar ensures increased comfort
• Rubber Toe-Bumper for added scuff protection

Sole:

• Temperature Maximum 120ºC (degrees Celsius)
• Oil and acid resistant EVA/Rubber
• Slip Resistance - Tested to EN345 and meets these requirements. However, care should always be taken on wet or oily surfaces
• Crack Resistance - Tested to 30,000 flex cycles

Toe Cap:

• Steel Toe Cap - Tested to an impact resistance of 200 Joules

Anti Static Properties:

• Product is anti static. If application is life critical additional consultation with product expert is required. Electrical resistance can be significantly changed by flexing, contamination or moisture. Introduction of additional inner sole reduces static resistance

Combat gear workboots. Our Black Hawk S3 is ISO 20345 and SABS approved. It is a high quality, close quarter combat boot designed for security applications. It features a steel toe cap, anti-penetration steel midsole, water resistance upper, rust proof brass D-rings, and Side YKK zip and laces for secure and speedy fixing and/or removal.

• Steel toe cap
• Anti Penetration steel mid sole
• Water resistant upper construction
• Rust proof brass D rings
• Side Zip for speedy fixing and/or removal
• Side zip for speedy fixing and/or removal
• Laces to ensure correct fitting
• Dual Density PU sole for added comfort and durability
• Taibrelle moisture wicking lining

Materials:

• Upper Water-Resistant Heavy Duty Canvas - complete with Leather Buffers
• Lining Breathable and Abrasion Resistant Tai-brelle (Equivalent to Cambrelle)

Special Features:

• Hi-Leg Lightweight Security Boot
• Heavy Duty Canvas has Water-Resistant coating which allows breathability and quick-drying
• Steel Mid-Sole - essential for broken glass and hypodermic needles
• Leather Buffer over complete toe area offers resistance to scuffing and wear
• Lace Up Front over Padded Tongue
• Quick Release Concealed Zip on side
• Approved YKK zip
• Padded Upper Collar ensures increased comfort
• Dual-density PU Sole ensures maximum comfort and increased durability

Sole:

• Temperature Maximum 90ºC (degrees Celsius)
• Oil and acid resistant Dual Density PU
• Slip Resistance - Tested to Intertek PM144 2004 and meets these requirements. However, care should always be taken on wet or oily surfaces
• Crack Resistance - Tested to 30,000 flex cycles

Toe Cap:

• Steel Toe Cap - Tested to an impact resistance of 200 Joules

Anti Static Properties:

• Product is anti static. If application is life critical additional consultation with product expert is required. Electrical resistance can be significantly changed by flexing, contamination or moisture. Introduction of additional inner sole reduces static resistance

• PU Injected Molded sole
• Canvas Upper

The Radebe boasts everything that you could possibly want from a mining boot but has several new features that puts it above the rest. Equipped with a TPU sole, it features increased elasticity and improved abrasion resistance for the harshest and most unwelcoming surface conditions, while the addition of a reflective strip adds all-important increased visibility. For so dangerous an occupation as mining only the very best will do, and you don’t get much better than the Radebe.

• Extreme Abrasion Resistance
• Ultra-Slip Resistant
• Increased Resistance to Oil & Grease
• CE EN ISO 20345 Approved
• Reflective Strips
• genuine Split Buffalo Leather Upper
• Lightweight and flexible Dual Density PU/TPU Sole
• Steel Toe Cap with Impact Protection of 200 joules
• Shock Absorbent Heel
• Removable Anti-Static Inner Soles
• Heat Resistant To 90º Celsius
• Wider Cut for Added Comfort
• Stylish Design

Upper: Breathable canvas | 10 pair eyelet lace-up

Lining: Needle-fi bred vamp lining for excellent perspiration absorbency | Polyester and viscose top sock for additional comfort

Toe cap: Not available

Sole: Single Density PU (Heat-resistant up to 95°C)

Upper: Full grain leather | 4 pair Ghillie loops with 1 pair non-metalic eyelets | Padded bellows tongue and collar for comfort                            Extra-wide fitting upper as per podiatry specifications

Lining: Needle-fibred vamp lining for excellent perspiration absorbency | Anti-static, non-woven in-sock with Poron at the ball and heel of the foot for flexibility, comfort and stability | Anti-bacterial Energiser EVA top sock with Poron at the ball and heel of the foot for comfort and anti-fatigue support

Midsole: Engineered with an EVA heel insert for shock absorption | Shank reinforcement for arch support

Toe cap: Composite

Sole: Double Density PU/PU (Heat-resistant up to 95°C)

Upper: Full grain leather | 4 pair D-ring lace-up with hooks | Padded bellows tongue and collar for comfort | Extra-wide fitting upper as per podiatry specifications

Lining: Needle-fibred vamp lining for excellent perspiration absorbency | Anti-static, non-woven in-sock with Poron at the ball and heel of the foot for flexibility, comfort and stability | Anti-bacterial Energiser EVA top sock with Poron at the ball and heel of the foot for comfort and anti-fatigue support

Midsole: Engineered with an EVA insert at the heel for shock absorption | Shank reinforcement for additional arch support

Toe cap: Steel - extra-wide fitting (Available without toe cap)

Sole: Double Density PU/PU (Heat-resistant up to 95°C)

Upper: Full grain leather | 3 pair Ghillie loops and hooks | Leather anti–scuff toe feature | Padded bellows tongue and collar for comfort

Lining: Needle-fibred vamp lining for excellent perspiration absorbency | Anti-static, non-woven in-sock for flexibility, comfortand stability | Anti-bacterial Energiser woollen top sock with anti-microbial properties and a Poron insert at the heel for shock absorption

Midsole: Shank reinforcement for additional arch support

Toe cap: Steel

Sole: Double Density PU/TPU (Heat-resistant up to 95°C)

Upper: Full grain leather | 5 pair D-Ring lace-up | Padded collar for comfort | Reflective safety tab on rear

Lining: Needle-fibred vamp lining for excellent perspiration absorbency | Anti-static, non-woven in-sock for flexibility, comfort and stability | Anti-bacterial Energiser woollen top sock with anti-microbial properties

Midsole: Shank reinforcement for arch support | Steel midsole available

Toe cap: Steel | Available without toe cap

Sole: Double Density PU/PU (Heat-resistant up to 95°C)

Upper: Genuine split leather | 5 pair D-ring lace-up | Padded bellows tongue and collar for comfort

Lining: Needle-fibred vamp lining for excellent perspiration absorbency | Anti-static, non-woven in-sock for flexibility, comfort and stability

Midsole: Steel midsole available

Toe cap: Steel

Sole: Double Density PU/PU (Heat-resistant up to 95°C)

Upper: Full grain leather | 4 pair D-ring lace-up with hooks | Padded bellows tongue and collar for comfort | Extra-wide fitting upper as per podiatry specifications

Lining: Needle-fibre vamp lining for excellent perspiration absorbency | Anti-static, non-woven in-sock with Poron at the ball and heel of the foot for flexibility, comfort and stability | Anti-bacterial Energiser EVA top sock with Poron at the ball and heel of the foot for comfort and anti-fatigue support

Midsole: Engineered with an EVA heel insert for shock absorption | Shank reinforcement for additional arch support | Steel midsole available

Toe cap: Steel - extra-wide fitting

Sole: Double Density PU/PU (Heat-resistant up to 95°C)

Upper: Full grain leather | 2 pull straps for ease of entering and exiting the boot

Lining: Needle-fibred vamp lining for excellent perspiration absorbency | Anti-static, non-woven in-sock for flexibility, comfort and stability |  Anti-bacterial Energiser woollen top sock with anti-microbial properties

Midsole: Shank reinforcement for additional arch support | Standard with steel midsole

Toe cap: Steel

Sole: Double Density PU/Rubber - outer sole 8mm thick (Heat-resistant up to 300°C)

• Steel toe cap designed to withstand an impact load of 200 joules
• Buffalo leather for durability
• Oil and acid resistant sole with anti-slip and anti-static properties
• Shank reinforcement for support and stability
• PU/PU sole for comfort, shock absorption and durability
• EVA innersole for comfort and shock absorption

Material: Buffalo Leather