• Long, flat jaws and straight gripping surfaces.
• Face hardness approximately 62HRC.
• GEDORE special hardened and tempered steel, chrome plated.
• Handles with VDE insulation as per DIN EN 60900.

For Similar DIY Tools, Please Click Here

2 Drawer Tool Chest

Content:

- 16x 1/2" Dr. 6pt Sockets: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22, 24, 27, 30, 32mm

- 1x 1/2" Dr. Quick-release Offset Ratchet

- 1x 1/2" Dr. Extension Bar: 125mm

- 9x Hex Key Wrenches: 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10mm

- 1x 240mm Box Joint Water Pump Pliers

- 1x 150mm Combination Pliers

- 1x 200mm Adjustable Wrench

- 1x 5m x 19mm Tape Measure With Grip

- 1x 6" Medium Half-round File

- 1x 300g (10oz) Engineer's Hammer - Wood Handle

- 1x Circuit Tester 100-500v

- 1x Utility Knife

- 7x Magnetic Ratchet Driver with Bits: Phillips #1, Phillips #2; Slotted 5mm, Slotted 6mm; Star Star T15, Star T20

- 4x Screwdrivers: Phillips #1 x 100mm, Phillips #2 x 150mm, Slotted 5.5 x 100mm, Slotted 6.5 x 150mm

- 22x Screwdrivers Bits:

       3x Phillips: #1, #2, #3

       6x Slotted: 3, 4, 5, 5.5, 6, 7mm

       6x Star: T15, T20, T25, T27, T30, T40

       3x Hex: 4, 5, 6mm

       3x Pozi: #1, #2, #3

       1x Adaptor

• Loosens rusted or tightened screws, nuts & bolts

• Forward & reverse ratcheting

• Heavy-duty, alloy steel bits

• Contents:

-   1 - 1/2" Dr. Impact Driver

-   1 - 1/2" Dr. x 5/16" Bit Holder

-   5 - Screw Extractor Bits: #1 (M3~M6), #2 (M6~M8), #3 (M8~M11), #4 (M11~M14), #5     (M14~M19)

-   5 - 5/16" Bits

-   2 - Phillips (36mm): #2, #3

-   1 - Phillips (80mm): #2

-   2 - Slotted (36mm): 8, 10mm

For Similar DIY Tools, Please Click Here

For spreading of horseshoe pattern circlips of shaft retainers, on motors, gearboxes, clutches, etc.
For VW, AUDI and American vehicles
GEDORE vanadium steel 31CrV3

For Similar DIY Tools, Please Click Here

• Length (L, L1): 170 mm
• Length: 6.3/4 inch
• Weight: 191 g

2 Drawer Tool Chest

- Industrial grade tools

- 90-Tooth quick-release ratchets

- S2 alloy steel screwdrivers with “Xtro-Soft” cushion grip

- Chrome Vanadium steel sockets, accessories, ratchets & wrenches

- Heavy duty metal chest with ball-bearing drawer slides

- Bonus drawer for added storage

Content:

- 12x 1/4" Dr. 6pt Sockets: 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13mm

- 13x 1/2" Dr. 6pt Sockets: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22, 24mm

- 1x 1/4" Dr. Quick-Release Offset Ratchet

1x 1/2" Dr. Quick-Release Offset Ratchet

- 2x 1/4" Dr. Extension Bars: 50, 75mm

- 2x 1/2" Dr. Extension Bars: 125, 250mm

- 1x 3/8"(F) x 1/2"(M) Sliding T Adaptor

- 1x 1/4" Dr. x 6" Go-thru Spinner Handle

- 1x 1/2" Dr. x 16mm Spark Plug Socket

- 1x 1/4" x 1/4" Bit Coupler

- 22x 1/4" Screwdriver Bits:

       3x Phillips: #1, #2, #3

       6x Slotted: 3, 4, 5, 5.5, 6, 7mm

       3x Hex: 4, 5, 6mm

       3x Pozi: #1, #2, #3

       6x Star: T15, T20, T25, T27, T30, T40

       1x 1/4" x 1/4" Adaptor

- 7x Combination Wrenches: 10, 11, 12, 13, 14, 15, 17mm

- 9x Hex Key Set: 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10mm

- 7x "Xtro-Soft" Pro Screwdrivers:

       4x Slotted: 4 x 80mm, 6.5 x 38mm, 6.5 x 100mm, 8 x 150mm

       3x Phillips: #1 x 80mm, #2 x 38mm, #2 x 100mm

- 1x 7" High Leverage Combination Pliers

- 1x 6" High Leverage Long Nose Pliers

Contains:

1 x 2mm

1 x 2.5mm

1 x3mm

1x 4mm

1 x 5m

1 x 6mm

1 x 8mm

1 x 10mm 

Contents: 2, 2.5, 3, 4, 5, 6, 8, 10mm

• Opening stop, spring and brass adjusting screw.
• For cables 0.8 - 6.0 mm2.
• GEDORE special hardened and tempered steel, chrome-plated.
• Handles with VDE insulation as per DIN EN 60900.

For Similar DIY Tools, Please Click Here

Contents: T15, T20, T25, T27, T30, T40, T50, T55

Contents: T15, T20, T25, T27, T30, T40, T50, T55

Einhell TE-CB 18/180 Li-Solo Cordless Blower – Power X-Change

The Einhell TE-CB 18/180 Li-Solo Cordless Blower offers powerful, versatile cleaning for the garden, workshop, or construction site. Part of the Power X-Change battery family, this blower provides cordless freedom, eliminating the need for extension cables or nearby power outlets. With two speed levels and an airspeed of up to 180 km/h, it handles everything from dust and dirt to chip removal, while included inflation adapters extend its functionality for inflating air mattresses and other items. Lightweight, compact, and comfortable with a softgrip handle, it’s the ideal tool for professional and home use.

The Einhell TE-CB 18/180 Li-Solo Cordless Blower is a compact powerhouse, perfect for cleaning, inflating, and clearing debris with cordless flexibility and professional-grade performance.

Features & Benefits

• Member of the Power X-Change family – batteries interchangeable with all compatible Einhell tools and garden equipment

• Air speed up to 180 km/h with two speed levels for application-specific work

• Cordless operation – freedom from cables and power outlets

• Versatile applications – garden, workshop, construction site, or inflating items with included adapters

• Softgrip handle for ergonomic and comfortable operation

• Turbo function for heavy-duty cleaning

• Lightweight and compact – 0.9 kg for low-fatigue use

• Includes 3 inflation adapters for versatile applications

• Motor voltage: 18 V

• Air speed level 1: 130 km/h

• Air speed level 2: 180 km/h

• Number of batteries included: 0 pcs

• Number of chargers included: 0 pcs

• Product weight: 0.9 kg

Note: Battery and charger sold separately; compatible with all Power X-Change batteries.

• Self-adjusting for wires 0,5-5,0mm2.
• GEDORE special hardened and tempered steel, chrome plated.
• Handles with VDE insulation as per DIN EN 60900

For Similar DIY Tools, Please Click Here