• Shows two scales: freezing point of radiator solution and boiling point of summer coolant

• Precision calibrated rubber bulb

• Extra-long rubber tip

• Tests all ethylene glycol solutions

• Quick and easy way to test for moisture content in the brake fluid for DOT 3 DOT 4 & DOT 5.1

• LED light indicators show percentage of water in the brake fluid

• Battery Included

- Tests fuses, light sockets and locates electric current

- Circuit tester can help find broken and live wires

- Easy-to-read LCD display

- Battery not required

• A comprehensive set for most of cars to enable quick testing of radiator system leakage and coolant

• Various colour coded radiator rest caps make it easy to choose suitable test cap to work on major vehicle brands on market

• Blue and black connectors are for testing pressure caps

• Thermometer included for extra safety

• Applications: Alfa Romeo, Audi, BMW, Cadillac, Chevrolet, Citroen, Daewoo, Daihatsu ,Fiat, Ford, Holden, Honda, Hyundai, Isuzu, Jacquar, Jeep, Kia, Lancia, Land Rover, Lexus, Mazda, Mercedes, Mini Cooper, Mitsubishi, Nissan, Opel, Peugeot, Pontiac, Porsche, Proton, Renault, Saab, Satum, Scion, Seat, Skoda, Subaru, Suzuki, Toyota Camry, Vauxhall, Volvo, VW

• Ideal for extracting broken screws, studs & bolts without breaking or jamming

• Capacity: 6 - 16mm or 1/4″ - 5/8″

• Contents:

- 5 – Drill bits (1/8″, 3/16″, 1/4″, 5/16″, 11/32″)

- 5 – Extractor pins

- 5 – Extractor nuts

- 10 – Drilling guides

The Model 1224 threads a wide range of pipe including black, galvanized and plastic-coated pipe,

together with stainless steel, IMC and heavy-wall conduit, as well as rod up to 30 Rockwell C.

• An induction motor helps minimize noise.
• A special capacitor-start / capacitor-run motor allows the 1224 to thread a full range of material where voltage drop is experienced.
• 1/4"-2" Universal Die Head; 2 1/2"-4" receding die head allows cutting of tapered or straight NPT/NPSM or BSPT/BSPP threads.
• Constant and proper lubrication of dies and workpiece with through-head oiling.

10 masonry drill bits Ø 3-10 mm with carbide tip suitable for hammer drilling in masonry, limestone, natural stone and cast stone.

8 wood drill bits Ø 3-10 mm with centring tip for precise centring. For hardwood, softwood and plastic.

45 screwdriver bits with Phillips, Pozidriv, Torx, hexagon-head and longitudinal slot screw heads in all standard sizes, as well as 6 nutsetters. Suitable for all screwdriving applications.

Magnetic universal holder for fast bit changes and a reliable screw hold in the bit.

Dimensions (LxWxH): 321 x 71 x 228 mm

Weight: 1.694 kg

Contents:

• 1x LED torch
• 1x adjustable spanner
• 8x HSS-R metal drill bits, Ø 2-6 mm
• 10x masonry drill bits, Ø 3-10 mm
• 13x screwdriver bits, L=50 mm, PH 0/1/2/3, PZ 0/1/2/3, T 10/15/20/25, H 5
• 34x screwdriver bits, L=25 mm, PH 0/0/1/1/2/2/3/3, PZ 0/0/1/1/2/2/3/3, S 5/7, T 10/10/10/15/15/20/20/25/25/30/30/40/40, H 3/5/6
• 6x nutsetters, Ø 6/7/8/10/12/13 mm
• 1x universal holder, magnetic
• 1x countersink

A BAG THAT IS A TOUGH COOKIE

We believe that a good tool bag needs to be three things: Durable, easy to attach and with as much storage space as possible. The result: our Engelbert Strauss tool bags. Everything can be stowed away safely here and does away with the need to bend down to the tool case. We have also paid close attention to the intuitive double attachment on the matching Engelbert Strauss Tool belt: Nothing pinches or slips.

• Durable tool bag with different pocket sizes
• High-quality and dimensionally stable finishing
• Very comfortable in combination with the Engelbert Strauss Tool belt (not included), can be attached to any standard belt
• 4 large main pockets, other pockets for various tools and other equipment
• With a pen pocket on the side and a zip pocket for small parts
• With adhesive tape holder on the side
• Durable handle with synthetic reinforcements
• Volume: 4.5 litres
• Bag dimensions (WxH) approx. 270 x 310 mm
• Upper material: Synthetic
• Pockets / Storage: Pen pocket, Slanting pockets, Safety pocket
• Attachment type: Belt loops
• Bag systems: Heavy Duty

Material: Shell 100% Polyester (approx. 220 g/m²)

Care instructions: Do not wash, Do not bleach, Do not tumble dry, Do not iron, Do not wet clean

Anyone who needs lots of tools at work does not automatically need a case all the time. The Engelbert Straus Tool belt leaves both hands free and means that all tools are available within seconds. There is space for several tool bags on the belt for various tasks. Which ones you need is up to you: Simply choose your ideal combination from the 5 available extra tool bags.

One belt – lots of combinations

And because nobody needs workwear that pinches or rubs, we have paid a lot of attention to the padding on the belt. The result? This is something you can feel even after several hours of work.

• High-quality belt for attaching the Engelbert Straus Tool bag (not included)
• High flexibility thanks to the individual arrangements of the pockets and combinations
• The tool bags are positioned ideally thanks to the double attachment: Hook onto the belt and Velcro fastener
• The bags can be exchanged easily without having to remove the belt
• With a magnetic Fidlock® fastener
• Steplessly adjustable and pleasantly padded all-round for absolute comfort
• Width: approx. 95 mm
• Heavy duty bag stystem

Material: Shell 100% Polyester (approx. 220 g/m²), Lining 100% Polyester

Care instructions: Do not wash, Do not bleach, Do not tumble dry, Do not iron, Do Not Dry clean

• Multi-Use Tool Box
• Designed to fit AmPRo’s VA Foam Tool Sets
• Multi use Storage System
• Industrial Grade Blown Plastic Casing
• With protective sponge on the inside
• Tools not included

123

• 83 Pieces
• Ideal for the professional workshop.
• Rigid sheetmetal structure with precision CNC punched pegboard.
• Three easy-slide drawers incorporating extra strong ball bearing slide mechanisms.

• 80mm-deep doors to accommodate numerous accessories – moveable shelves, hanging rack and screwdriver rack.
• Doors: ZA Registered Design – A2006/01314 & F2006/01315.
• Lockable.
• Phosphated to prevent corrosion. Blue and grey powder coated.
• L=650 x W=345 x H=970.

For Similar DIY Tools, Please Click here

For Similar DIY Tools, Please Click here

6-Drawer Tool Chest

- Heavy Duty Double Wall Construction for Strength

- Tools not included

- Ball Bearing Drawer Slides for Smooth Gliding

- Two Gas Struts to Open & Close Lid Easily

- Two Solid Plastic Bumpers

- Two Heavy Duty Stainless Steel Carry Handles

- Central Locking System with Cylinder Lock

- Recessed & Perforated Panels

- Dimensions: 706mm (W) x 461mm (D) x 459mm (H)

- 3 small Drawers: 171mm (W) x 410mm (D) x 75mm (H)

- 3 big Drawers: 569mm (W) x 410mm (D) x 75mm (H)