Penetrates like oil, lubricates like grease. For chains, linkages & cables. (For non-black product use Chain & Linkage Spray)

• Transport vehicles uses: cable linkages, springs, hinges, locks, etc.
• Industrial uses: wire ropes, winches, pulley blocks, cams, slides
• Domestic uses: hinges, electric garage doors, slides & chains

Colour: Black

• 400ml Aerosol
• Operating Temp -30 to 110°C
• Flammable
• Do not expose to direct sunlight
• Keep out of reach of children
• Store under cover/indoors
• Do not expose to temp’s above 50°C
• Do not spray on naked flame or incandescent material

• Good Lubrication in Adverse Conditions
• Resistant to High Temperatures
• Protection Against Rust and Corrosion
• Resistance to water wash-out

High performance multipurpose grease recommended for the lubrication of roller bearings, plain bearings, thrust bearings, gears, electric motors, winches, bushings, wheel bearings, universal joints, ball joints, chassis lubrication in heavy- and light-duty, automobiles, landscaping, agricultural, motorcycle and power sports equipment operating under severe conditions. Operating temperatures for long-term lubrication: from -30 °C / -22 °F to +150 °C / +302 °F and up to +200 °C / +392 °F in peak.

Application: Greases

Quality: Technosynthese®

Product Range: Car, Commercial Vehicles, Gardening, Leisure, Marine, Motorcycle

Capacity: 0.2 litre

COPASLIP Anti-Seize Compound (500g)

Keep fasteners protected and prevent seizure with MOLYSLIP COPASLIP, a high-performance anti-seize compound designed for extreme heat, pressure and corrosive environments. Perfect for maintaining threaded connections, preventing galling, and ensuring easy disassembly every time.

Features & Benefits

• High-temperature protection – Formulated to withstand up to 1 100°C, making it ideal for exhaust manifold studs, cylinder heads, and spark plug threads.

• Prevents seizure & galling – Ensures smooth, consistent friction between threads, allowing reliable assembly and disassembly.

• Corrosion resistance – Protects components from rust and harsh environmental exposure.

• Versatile application – Suitable for threads, gaskets, packings, and tight-tolerance components.

• Easy to apply – Use as supplied; apply a thin, even coating to clean, dry surfaces.

• What’s in the box: 1 × 500g COPASLIP can.

• Consistency: NLGI No. 2

• Penetration (25°C, 60x): 275 (1/10 mm)

• Penetration Change (10 000x): 35

• Dropping Point: None

• Timken OK Load: >25 kg

• Copper Corrosion: 1b (ASTM D130)

• Base Oil Viscosity: 100 cSt at 40°C

• Max Operating Temperature: 1 100°C

• Torque to Loosen After Heat Exposure:

  • 565°C: 70 Nm

  • 1 100°C: 200 Nm

• Coefficient of Friction: 0.140 at 200N

• Compatibility:

  • Stainless / Austenitic Steel: No

  • Battery Terminal Protection: Excellent

  • Disc Pad Anti-Squeal: Suitable

• Packaging: 500g metal can

• Copper-based anti-seize compound

Spanjaard CV Joint Grease 500g

Spanjaard CV Joint Grease is a premium heavy-duty extreme pressure (EP) grease specially formulated for constant velocity (CV) joints in front-wheel-drive and all-wheel-drive vehicles. Fortified with 5% molybdenum disulfide (MoS₂), this high-performance grease provides exceptional protection against wear, shock loading, vibration, and high sliding contact, helping to extend CV joint life and ensure smooth, reliable operation.

Features & Benefits

• Premium extreme pressure grease formulated specifically for CV joints
• Contains 5% fine-grade molybdenum disulfide (MoS₂) for superior wear protection
• Forms a durable low-friction boundary film under extreme operating conditions
• Reduces friction, fretting, pitting, and vibration-induced wear
• Withstands high sliding contact, shock loads, and angular articulation
• Excellent resistance to grease displacement caused by centrifugal forces
• Helps minimise CV joint noise, including clicking during turns
• Suitable for front-wheel-drive and all-wheel-drive vehicle applications
• Ideal for off-road vehicles, performance vehicles, and heavy towing applications
• Provides reliable lubrication during assembly and servicing of CV joints
• Helps prevent dry starts and contamination ingress when used in CV boots
• Extends component life and reduces maintenance costs

• Size: 500g
• Appearance: Dark Grey to Black Paste
• Thickener: Lithium Complex
• NLGI Grade: 2
• MoS₂ Content: 5%
• Worked Penetration: 265 – 295 (1/10 mm)
• Base Oil Viscosity @ 40°C: 200 cSt
• Timken OK Load: >27 kg
• Drop Point: >240°C
• Operating Temperature Range: -20°C to 150°C
• Suitable Applications: CV Axles, Drive Shafts, Half-Shafts, CV Boots, Off-Road Vehicles, Performance Vehicles, Heavy Towing Applications