7 Results

Per Page
    • In Stock

    • Ideal bicycle light for long-distance off-road races and 24-hour events

      Specially designed for off-road mountain biking

      Single track friendly

      Produces a near-perfect beam pattern

      Content: Endurance+ Bicycle light, Charger, 5 200mAh rechargeable battery, XP Quick-release cycle light clamp

      XP Quick-release bicycle light clamp fits any size round handlebars

      Battery pack comes in a non-slip neoprene pouch – does not vibrate and let dust scratch your frame

      Cable length: on Battery 15cm, on Light 15cm – 30cm combined

      Light comes with 4 modes: High, Med, Low and Pulse

      Mode button functions as battery-level indicator:

      - Green: 50 - 100% battery power remaining

      - Orange: 10 - 50% battery power remaining.

      - Red: 5 - 10% battery power remaining.

      - Flashing red:  <5% battery power remaining - light will step down to a low power state

      Weight: 410g (incl. battery and battery bag)

      LED: 3 X Cree XP-L, natural white light

      Beam Width: 18° Hot Spot, 180° Side Spill

      Optics: Triple Lens Optics

      Thermal Management System: Built-in overheating protection

      Battery: 4 Cell 8.4V 5200mAh Rechargeable Lithium-Ion Battery with 3 layers of physical protection

      Battery Pouch: High-quality stretchable neoprene

      Charger: SABS approved 2-pin wall charger

      Splash proof

       

      Mode

      Output

      Runtime

      Beam Distance

      High

      2100 L

      3.5 hr

      223 m

      Med

      750 L

      10 hr

      116 m

      Low

      200 L

      40 hr

      61 m

      Pulse

      400 L

      15 hr

      116 m

    • N$2,485.00

    • Light Extreme Endurance+ 2100

    • Code: 9110200938
    • In Stock

    • Aluminium barrel

      Integrated pressurisable chamber which instantly releases air at the flick of a switch

      Ideal for tubeless tyre inflation

      Clever valve system (for Presta & Schrader)

      Large top mounted pressure gauge.

      Steel foot base with nonslip pad

      Max pressure 240 psi

    • N$2,132.00

    • Pump Ryder Air Tank 2.0

    • Code: 9110300149
    • In Stock

    • The standard body of a Tacx direct drive trainer is not compatible with all cassettes. Use this body to suit your SRAM XD-R cassette. It’s easy to place, and all you’ll need is a 5 mm hex key.

      The SRAM XD-R body is suitable for 11- and 12-speed SRAM XD-R cassettes.

    • N$2,490.00

    • Tacx SRAM XD-R Body (Type 1)

    • Code: 9110101200
    • Out of Stock Online

    • The standard body of a Tacx direct drive trainer is not compatible with all cassettes. Use this body to suit your SRAM XD-R cassette. It’s easy to place, and all you’ll need is a 5 mm hex key.

      The SRAM XD-R body is suitable for 11- and 12-speed SRAM XD-R cassettes. This version is used for trainers with Type 2 axles.

       

      Compatible Devices:

      • Tacx® FLUX 2 Smart Trainer
      • Tacx® FLUX S Smart Trainer
      • Tacx® NEO 2T Smart Trainer

    • Which Type of Axle Do I Have on My Tacx Trainer?

      Tacx direct-drive trainers will come in two different axle types described below.

      NOTE: Most newly purchased Tacx direct drive trainers will be a Type 2 trainer.The exception would be a trainer that has sat on a shelf for an extended period of time. 

       

      Type 1 Axle

      6 mm or 9 mm internal diameter axle hole suitable for a quick-release skewer.  Adapters allow for a thru-axle bike to be installed onto the trainer using a quick-release skewer.

      Type 2 Axle

       12 mm internal diameter axle hole suitable for using a bike's thru-axle. Adapters allow the use of a quick-release skewer as well.

      How Do I Determine Which Type of Axle My Trainer Has?

      Type 1 trainers:

      • NEO Smart
      • NEO 2 Smart
      • FLUX Smart
      • FLUX S Smart*
      • FLUX 2 Smart*

      Type 2 trainers:

      • NEO 2T
      • NEO 2, Type 2
      • FLUX S Smart*
      • FLUX 2 Smart*

      *NEO 2, FLUX S and FLUX 2 trainers have been manufactured using both Type 1 and Type 2 axles.  You can choose one of the following identification methods to determine which axle type your trainer has:

      NOTE: If a Cassette is currently installed onto the Cassette Body of your trainer, you will need to remove it using a cassette lock ring tool and chain whip in order to read the part number

       

      Identify the part number on the cassette body installed on the trainer out of the box:

      • Shimano Freehub bodies: Type 1, T2805.01 (S) compared to Type 2, T2875-01
      • Observe the perimeter surface of the axle endcaps on the trainer, looking for any white letters / numbers identifying the appropriate side for installation and axle diameter x length:
        • Type 1: All black endcap, Quick-release compared to thru-axle: no letters or numbers printed on either cap
        • Type 2: Quick release caps will be labelled: "QR DS", "QR x 130 NDS" or "QR x 135 NDS". Thru-axle endcaps will be labelled: "12 DS", "12 x 142 NDS" or "12 x 148 NDS".
      • Measure the inside diameter of the trainer axle with the cassette body removed using a caliper tool (pictured below)
        • Type 1: 6mm or 9mm
        • Type 2: 12mm

       

       

      Which Cassette Body Do I Need for My Trainer?

      Direct-drive trainers come with a SHIMANO/SRAM cassette body out of the box.  If you need a replacement or different cassette body, below are part numbers available for purchase:

      Description Service Part Number
      SHIMANO/SRAM Cassette Body (Type 1) S0012
      SHIMANO/SRAM Cassette Body (Type 2) S0050
      Tacx Campagnolo Cassette Body (Type 1) T2805.51
      Tacx Campagnolo Cassette Body (Type 2) T2875.51
      Tacx SRAM XD-R Cassette Body (Type 1) T2805.81
      Tacx SRAM XD-R Cassette Body (Type 2) T2875.76
      Tacx MICRO SPLINE Shimano 12spd Body (Type 2)  010-13042-07

       

    • N$2,490.00

    • Tacx SRAM XD-R Body (Type 2)

    • Code: 9110101201
To top