Ideal bicycle light for long-distance off-road races and 24-hour events

Specially designed for off-road mountain biking

Single track friendly

Produces a near-perfect beam pattern

Content: Endurance+ Bicycle light, Charger, 5 200mAh rechargeable battery, XP Quick-release cycle light clamp

XP Quick-release bicycle light clamp fits any size round handlebars

Battery pack comes in a non-slip neoprene pouch – does not vibrate and let dust scratch your frame

Cable length: on Battery 15cm, on Light 15cm – 30cm combined

Light comes with 4 modes: High, Med, Low and Pulse

Mode button functions as battery-level indicator:

- Green: 50 - 100% battery power remaining

- Orange: 10 - 50% battery power remaining.

- Red: 5 - 10% battery power remaining.

- Flashing red:  <5% battery power remaining - light will step down to a low power state

Weight: 410g (incl. battery and battery bag)

LED: 3 X Cree XP-L, natural white light

Beam Width: 18° Hot Spot, 180° Side Spill

Optics: Triple Lens Optics

Thermal Management System: Built-in overheating protection

Battery: 4 Cell 8.4V 5200mAh Rechargeable Lithium-Ion Battery with 3 layers of physical protection

Battery Pouch: High-quality stretchable neoprene

Charger: SABS approved 2-pin wall charger

Splash proof

Features

• Fast loading and security provided by lockable skewer with same-side adjustment lever
• Versatile design compatible with standard 9mm axles and most disc brakes
• Fits bikes with thru-axles with an adapter (20 mm included, 15 mm sold as accessory)
• Rear wheel is firmly secured, thanks to the quick release wheel strap
• Fits bikes with up to a 3" wide tire
• Locks the bike to the bike rack and the bike rack to the roof racks (locks included)

Technical specifications

Features

• Easy and firm bike fixation thanks to the stable frame holder
• Firm wheel fixation, thanks to the quick release wheel straps
• Locks the bike to the bike rack and the bike rack to the roof racks (locks included)

Features

• Strong coupling that needs no pre-adjustment for mounting
• Tiltable for trunk access (without bikes)
• Bikes are secured to the bike rack with soft rubber straps
• Use Thule Bike Frame Adapter 982 for fitting of bikes with non-standard frames (e.g. ladies’ bikes, BMXs, downhill bikes)
• Folds flat for easy storage and handling
• Locks the bike rack to the towbar with the Thule Lock 957 accessory

Technical specifications

Features

• All parts in contact with the car and bikes are coated with rubber for extra protection
• Possible to attach Thule Light Board 976
• Use Thule Bike Frame Adapter 982 for fitting of bikes with non-standard frames (e.g. ladies’ bikes, BMXs, downhill bikes)
• This product does not have universal fit. Please use the Thule Buyer's Guide for information related to specific car models.

Technical specifications

Features

• Load bars move 60 cm in each direction for easiest access to roof-mounted cargo.
• Ergonomic, rubberized grip panels let you move bars with only one hand.
• Maximum user security through snap-lock functionality and red color indications for open and closed position.
• Upper T-track allows fast installation/removal of accessories.
• Lockable to prevent unauthorized use of the product.
• Check the Thule Buyer's Guide to find out which roof rack fits your car.
• 127cms.

Features

• Load bar for Thule Evo roof rack system
• Flexible tri-slot design allows use of a range of load accessories independently or in combination
• Upper and rear T-tracks are for fast installation/removal of accessories, lower T-track is for connection to roof
• Check the Thule Buyer's Guide to find out which roof rack fits your car

Technical specifications

Features

• Load bar for Thule Evo roof rack system
• Flexible tri-slot design allows use of a range of load accessories independently or in combination
• Upper and rear T-tracks are for fast installation/removal of accessories, lower T-track is for connection to roof
• Check the Thule Buyer's Guide to find out which roof rack fits your car

Technical specifications

Features

• Load bar for Thule Evo roof rack system
• Flexible tri-slot design allows use of a range of load accessories independently or in combination
• Upper and rear T-tracks are for fast installation/removal of accessories, lower T-track is for connection to roof
• Check the Thule Buyer's Guide to find out which roof rack fits your car

Technical specifications

Features

• Patented adapter design allows use of current bike carrier
• Durable materials and construction for added stability
• Welded steel body

Aluminium barrel

Integrated pressurisable chamber which instantly releases air at the flick of a switch

Ideal for tubeless tyre inflation

Clever valve system (for Presta & Schrader)

Large top mounted pressure gauge.

Steel foot base with nonslip pad

Max pressure 240 psi

The standard body of a Tacx direct drive trainer is not compatible with all cassettes. Use this body to suit your SRAM XD-R cassette. It’s easy to place, and all you’ll need is a 5 mm hex key.

The SRAM XD-R body is suitable for 11- and 12-speed SRAM XD-R cassettes.

The standard body of a Tacx direct drive trainer is not compatible with all cassettes. Use this body to suit your SRAM XD-R cassette. It’s easy to place, and all you’ll need is a 5 mm hex key.

The SRAM XD-R body is suitable for 11- and 12-speed SRAM XD-R cassettes. This version is used for trainers with Type 2 axles.

Compatible Devices:

• Tacx® FLUX 2 Smart Trainer
• Tacx® FLUX S Smart Trainer
• Tacx® NEO 2T Smart Trainer

Which Type of Axle Do I Have on My Tacx Trainer?

Tacx direct-drive trainers will come in two different axle types described below.

Type 1 Axle

6 mm or 9 mm internal diameter axle hole suitable for a quick-release skewer.  Adapters allow for a thru-axle bike to be installed onto the trainer using a quick-release skewer.

Type 2 Axle

 12 mm internal diameter axle hole suitable for using a bike's thru-axle. Adapters allow the use of a quick-release skewer as well.

How Do I Determine Which Type of Axle My Trainer Has?

Type 1 trainers:

• NEO Smart
• NEO 2 Smart
• FLUX Smart
• FLUX S Smart*
• FLUX 2 Smart*

Type 2 trainers:

• NEO 2T
• NEO 2, Type 2
• FLUX S Smart*
• FLUX 2 Smart*

*NEO 2, FLUX S and FLUX 2 trainers have been manufactured using both Type 1 and Type 2 axles.  You can choose one of the following identification methods to determine which axle type your trainer has:

Identify the part number on the cassette body installed on the trainer out of the box:

• Shimano Freehub bodies: Type 1, T2805.01 (S) compared to Type 2, T2875-01
  • 
  • 
• Observe the perimeter surface of the axle endcaps on the trainer, looking for any white letters / numbers identifying the appropriate side for installation and axle diameter x length:
  • Type 1: All black endcap, Quick-release compared to thru-axle: no letters or numbers printed on either cap
  • 
  • Type 2: Quick release caps will be labelled: "QR DS", "QR x 130 NDS" or "QR x 135 NDS". Thru-axle endcaps will be labelled: "12 DS", "12 x 142 NDS" or "12 x 148 NDS".
  • 
• Measure the inside diameter of the trainer axle with the cassette body removed using a caliper tool (pictured below)
  • Type 1: 6mm or 9mm
  • Type 2: 12mm
  • 

Which Cassette Body Do I Need for My Trainer?

Direct-drive trainers come with a SHIMANO/SRAM cassette body out of the box.  If you need a replacement or different cassette body, below are part numbers available for purchase: