Ringmat

Extremely tough rubber matting

• Rubber matting for general industrial use.
• Conforms to Slip Resistance Test EN 13552 Category R10.
• Open holes allow grass to grow through.
• Connectors available to link matting for larger areas.

Material: SBR/NBR rubber

Surface Finish: Honeycomb pattern surface with holes

Product Height: 23mm

Operating Temperature: -20°C to +160°C

Environmental Resistance: Ideal for both indoor and outdoor applications

UV Resistance: Yes

Installation Method: Loose lay

Product Performance: Conforms to Slip Resistance Test EN 13552 Category R10

Cleaning Method: Wet/Dry vacuum or simply wash down with hose

Gripfoot

Grit Tape, Cleats and Tiles for Slip-Resistance

• Abrasive grit ‘anti-slip’ products with self-adhesive backing available in tapes, cleats and tiles.
• Provides additional grip underfoot on smooth surfaces.
• Hardwearing and easy to install.
• Gripfoot Tape – versatile for floor surfaces, machinery and vehicles
• Gripfoot Cleats (rectangular) are designed for use on steps and stairs.
• Gripfoot Tiles (square) are ideal for increasing safety on smooth, tiled floors.
• Conforms to Slip Resistance Test EN 13552 Category R13

Material: Abrasive grit consisting of aluminium oxide bonded to a polymer substrate. Solvent based acrylic emulsion adhesive backing. Product supplied with a moisture resistant release liner

Surface Finish: Grit

Operating Temperature: -10°c to +60°c

Resistant to Chemicals: N/A

Environmental Resistance: Suitable for indoor environments

UV Resistance: Yes

Typical Applications: Suitable for stairs, ladders, ramps, walkways and vehicles

Installation Method: Pressure sensitive self-adhesive tape

Product Performance: Conforms to Slip Resistance Test EN 13552 Category R13

Adhesion Strength: 2.5Kg/1”

Coating Thickness: 0.05mm

Solvent Residue: 0.005

Release Force: 13Kg/m2

Gripfoot

Grit Tape, Cleats and Tiles for Slip-Resistance

• Abrasive grit ‘anti-slip’ products with self-adhesive backing available in tapes, cleats and tiles.
• Provides additional grip underfoot on smooth surfaces.
• Hardwearing and easy to install.
• Gripfoot Tape – versatile for floor surfaces, machinery and vehicles
• Gripfoot Cleats (rectangular) are designed for use on steps and stairs.
• Gripfoot Tiles (square) are ideal for increasing safety on smooth, tiled floors.
• Conforms to Slip Resistance Test EN 13552 Category R13

Material: Abrasive grit consisting of aluminium oxide bonded to a polymer substrate. Solvent based acrylic emulsion adhesive backing. Product supplied with a moisture resistant release liner

Surface Finish: Grit

Operating Temperature: -10°c to +60°c

Resistant to Chemicals: N/A

Environmental Resistance: Suitable for indoor environments

UV Resistance: Yes

Typical Applications: Suitable for stairs, ladders, ramps, walkways and vehicles

Installation Method: Pressure sensitive self-adhesive tape

Product Performance: Conforms to Slip Resistance Test EN 13552 Category R13

Adhesion Strength: 2.5Kg/1”

Coating Thickness: 0.05mm

Solvent Residue: 0.005

Release Force: 13Kg/m2

Bakkie Mats

Hardwearing mats made from recycled tyres

• Durable and slide resistant.
• Flexible and double up as sand tracks when your wheels get stuck.
• Manufactured from recycled tyres.
• Protect your bakkie against scratches and dents.
• Aerated designs prevent water build-up, so no rust.
• Absorbs any heavy loads and spreads the weight evenly.
• Mats stay put when you unload.

Material: Rubber, Elastomer/Polyester

Surface Finish: Rubber

Product Height: 16mm - 20mm 

Durability: Heavy duty/traffic

Flame Propagation Test: BS EN 12281-1:2014 Average temperature rise not exceeding (*C) maximum 140*C

Product Performance: Hardness Shore A: 65

Pile Weight: 11-13 kg/m2

Colour: Black

Quality System: ISO 9001:2008

Cleaning Method: Brush or hose down on regular basis

Bakkie Mats

Hardwearing mats made from recycled tyres

• Durable and slide resistant.
• Flexible and double up as sand tracks when your wheels get stuck.
• Manufactured from recycled tyres.
• Protect your bakkie against scratches and dents.
• Aerated designs prevent water build-up, so no rust.
• Absorbs any heavy loads and spreads the weight evenly.
• Mats stay put when you unload.

Material: Rubber, Elastomer/Polyester

Surface Finish: Rubber

Product Height: 16mm - 20mm 

Durability: Heavy duty/traffic

Flame Propagation Test: BS EN 12281-1:2014 Average temperature rise not exceeding (*C) maximum 140*C

Product Performance: Hardness Shore A: 65

Pile Weight: 11-13 kg/m2

Colour: Black

Quality System: ISO 9001:2008

Cleaning Method: Brush or hose down on regular basis

Winntec Y6315 1.5 Ton Gearbox Jack – Trolley Type with Cradle

The Winntec Y6315 1.5 Ton Transmission Jack is designed for safely lifting, lowering, and supporting transmissions and transfer boxes in vehicles. Ideal for both professional mechanics and DIY enthusiasts, this heavy-duty trolley-type gearbox jack offers unmatched stability, precision control, and ease of use. Whether you're installing or removing a transmission, the Y6315 provides the support and flexibility needed to get the job done efficiently and safely.

Features

• Heavy Execution – Enables secure and effortless hydraulic lifting

• Continuous Adjustment – Allows for precise positioning of transmission units

• Controlled Lowering – Minimizes the risk of sudden drops and improves safety

• Adjustable Mounting Plate – Simplifies alignment during installation or removal

• Length Adjustable Base Plate with Holding Rails and Chains – Offers excellent working surface with secure holding features

• High Stability – Wide wheel spacing ensures excellent balance and reduced tipping risk

• Welded Wheel Base – Improves structural integrity and durability

• Swivel Castors – Allow smooth maneuvering and easy positioning in tight spaces

• Chrome Plated Pump Piston and Ram – Provides corrosion resistance and extended lifespan

• 360° Rotating Pump Handle – Operate the jack from any angle for convenience

• Training Available – Professional instruction offered for optimal usage

• 1 Year Warranty – Covers manufacturing faults and includes possible replacement

• Spares Available – Quick part replacement, with airfreight options for urgent needs

• Operational Videos – Learn by watching – easier than written manuals

• Capacity: 1.5 Ton

• Minimum Height: 220 mm

• Maximum Height: 940 mm

• Overall Length: 1105 mm

• Overall Width: 660 mm

• Tilt Range (Front/Side/Back): 24° / 11° / 18°

• Packaging Dimensions: 1150 × 695 × 405 mm

• Weight: 133.5 kg

Winntec 500kg Telescopic Gearbox Jack (Pit Type) – Precision Lifting for Gearbox Repairs

The Winntec 500kg Telescopic Gearbox Jack is the ultimate solution for lifting and positioning gearboxes or transmission units with accuracy and safety. Designed for pit-type applications, this heavy-duty jack offers exceptional stability under load, fast approach lifting, and a telescopic design for improved access and maneuverability in confined spaces. Ideal for professional workshops, garages, and service stations.

Engineered with premium European components, this gearbox jack delivers reliable performance and long-lasting durability for demanding workshop use.

Features

• Superior Stability Under Load – Secure and steady lifting performance

• Telescopic Design – Allows precise vertical movement and extended reach

• Dead Man’s Control – Built-in safety mechanism for added protection

• Fast Approach Speed – Speeds up operation for efficiency

• Swivel Castors – Heavy-duty, quiet, and easy to maneuver

• Wide Base – Distributes load evenly for extra safety and stability

• High Weight Capacity – Handles gearboxes up to 500kg

• Adjustable Height Range – Adapts to various vehicle types and tasks

• Pit Type Compatibility – Fits perfectly into pit-style workshop setups

• Durable Construction – Built from premium-grade steel for long service life

• Safety Features – Includes overload protection and locking mechanisms

• Premium European Design – Built for professionals with high-quality components

• Training Available – Get the most out of the equipment with technician training

• 1 Year Warranty – Covers factory defects and workmanship

• Spares Available – Fast access to parts, including emergency airfreight if required

• Operational Videos – Easy-to-follow tutorials for proper use

• Minimum Height: 1164 mm

• Maximum Height: 1958 mm

• Hydraulic Stroke: 817.5 mm

• Saddle Size: 335 × 335 mm

• Base Size: 600 × 570 mm

• Packaging Dimensions: 1080 × 280 × 165 mm

• Weight: 33.6 kg

Winntec 10 Ton Long Reach Trolley Jack – Built for Extreme Heavy-Duty Lifting

The Winntec 10 Ton Long Reach Trolley Jack is engineered for the toughest lifting tasks in commercial and industrial environments. With a rugged, long chassis frame, this jack is ideal for servicing trucks, buses, agricultural machinery, and heavy-duty vehicles. Featuring a powerful foot-operated pump, swivel castors for precise positioning, and a built-in overload safety valve, it ensures reliable, efficient, and safe operation every time.

Winntec’s reputation for premium-quality workshop equipment is backed by robust design, European engineering, and dependable performance—making this jack a trusted solution for any serious garage or fleet operation.

Features

• Foot-Operated Pump – Enables fast and efficient lifting with minimal effort

• Long Handle – Offers better leverage and ease of use

• Simple to Operate – Position and lift with ease using hydraulic force

• 360° Swivel Castors – Easy maneuvering, even in tight workshop spaces

• Safe and Stable – Wide base and robust wheels provide lifting stability

• Durable Construction – Built to withstand intense daily use

• Premium European Design – Engineered for professional-grade reliability

• Training Available – Hands-on training to get the best performance

• 1-Year Warranty – Covers all manufacturer faults

• Spares Available – Quick parts replacement from local or flown-in stock

• Operational Videos – Simple video tutorials for proper and safe use

• Minimum Height: 160 mm

• Maximum Height: 680 mm

• Width: 485 mm

• Length: 1635 mm

• Height: 1355 mm

• Weight: 145 kg

Winntec Long Chassis Jack – Heavy-Duty Lifting for Commercial Use

Built for serious performance in demanding environments, the Winntec Long Chassis Jack is your go-to solution for lifting trucks, buses, agricultural machinery, and other heavy vehicles. With a rugged design and premium European engineering, this jack delivers power, precision, and safety. Standard features include a foot-operated pump, long handle, swivel castors, and an automatic overload safety valve—making lifting tasks easier and more efficient than ever before.

Features

• Foot-Operated Pump – Enables smooth, hands-free lifting

• Long Handle – Improves leverage and ease of operation

• Effortless Use – Wheel under your vehicle, pump, and lift with minimal effort

• Swivel Castors – Full 360° rotation for precise positioning under any vehicle

• Safe & Stable Design – Broad base ensures stability during lifting

• Heavy-Duty Construction – Built to endure demanding workshop environments

• Premium European Quality – Reliable design and durable materials for long-term use

• Training Available – Learn how to operate the jack professionally

• 1-Year Warranty – Covers manufacturing defects for peace of mind

• Spares Available – Fast access to replacement parts when needed

• Operational Videos – Simple training through visual instruction

• Minimum Height: 150 mm

• Maximum Height: 680 mm

• Width: 366 mm

• Length: 1505 mm

• Height: 1345 mm

• Weight: 90 kg

Winntec 3-Ton Long Reach Trolley Jack – Built for Heavy-Duty Lifting

The Winntec 3-Ton Long Reach Trolley Jack is the perfect solution for servicing truck fleets, buses, agricultural machinery, and heavy-duty construction equipment. Designed to reach under low-clearance vehicles and extend to a high lifting range, this jack combines rugged strength with European engineering. Its foot-operated pump and long handle offer efficient lifting with minimal effort, while its long-reach design makes it ideal for challenging maintenance jobs. Built with top-quality materials and safety in mind, it’s a must-have for professional workshops.

Features

• Foot Operated Pump – Enables efficient lifting without straining the user

• Long Handle – Offers better leverage and ergonomic use

• Easy Operation – Simple to use; just wheel into position and pump to lift

• 360° Swivel Castors – Smooth maneuvering under and around vehicles

• Safe and Stable Design – Wide base ensures secure lifting and positioning

• Robust Construction – Heavy-duty steel frame built to withstand workshop wear

• Premium European Design – Combines advanced engineering with superior components

• Training Available – Professional training helps maximize product usage

• 1-Year Warranty – Covers all manufacturing faults for peace of mind

• Spares Available – Replacement parts flown in directly if needed

• Instructional Videos – Learn usage quickly and easily via video tutorials

• Minimum Height: 130 mm

• Maximum Height: 600 mm

• Width: 325 mm

• Length: 1400 mm

• Height: 1330 mm

• Weight: 65 kg

Winntec 30/15T Air-Hydraulic Jack – The Ultimate All-Round Lifting Solution
The Winntec 30/15T Air-Hydraulic Jack is a powerful and reliable lifting tool, ideal for workshops handling modern low-clearance vehicles, trucks, and buses. With a dual lifting stage that delivers 30 tons in the first and 15 tons in the second, it offers unmatched versatility. Featuring a low profile of just 150 mm and a total lift height of up to 300 mm (without extensions), this jack is engineered for superior performance. Built with premium components and European design standards, it ensures durability, efficiency, and ease of use in demanding environments.

Features

• Dual-stage lifting: 30T (1st stage) + 15T (2nd stage)
• Chromed main ram for added durability
• Long-life aluminium air motor
• Built-in air filter on supplied hose prevents system contamination
• Extensive height range with low-profile design (ideal for modern vehicles)
• 3 stackable saddle extensions (10 mm, 70 mm, 120 mm)
• Durable screw extension for additional lift height
• Strong, long-lasting wheels
• Premium European design – tested for professional performance
• Manual valve to close the oil channel during transport
• Professional training available
• 1-year warranty
• Spares available and quickly sourced if needed
• Operational videos included for ease of use and technician training

• Minimum Height: 185 mm
• Maximum Height: 373 mm
• Hydraulic Stroke: 108 mm
• Extension Screw: 80 mm
• Length: 580 mm
• Width: 320 mm
• Weight: 47 kg
• Included Extensions: 10 mm, 70 mm, 120 mm

6 Ton Pin Type Trestle Jack Stand Set with Rubber Head (Pair)

The Winntec 6 Ton Jack Stand Set is a professional-grade support solution designed for safely holding heavy vehicles in elevated positions. Supplied as a pair, these jack stands feature a robust pin-type height adjustment system, wide foot pads, and a large PU rubber support pad for added protection. Ideal for workshops, fleet maintenance, and home garages requiring higher load capacity and stability.

Features

• Locking Pin Design – Securely locks height with minimal risk of slippage

• Chain-Attached Pin – Prevents loss and ensures the pin is always within reach

• Large Rubber Support Pad – Protects the vehicle chassis from scratches or dents

• Foot Pads on Base – Improve grip on smooth surfaces and prevent floor damage

• Pin-Type Adjustment – Offers 5 adjustable height positions for versatility

• Lightweight Construction – Easy to transport and store

• Supplied as a Pair – Rated together for a combined 6-ton capacity, ensuring safer support

• Premium European Design – Engineered with top-tier materials for long-lasting durability and reliability

• Training Available – Learn to use the jack stands properly and safely

• Spares Available – Quick replacement parts access, flown in if needed

• Operational Videos – Simple video guides available for setup and usage

• Type: Pin type

• Lifting Capacity: 6 Ton (Pair)

• Minimum Lifting Height: 404 mm

• Maximum Lifting Height: 604 mm

• Net Weight: 11 kg

• Base Size: 341 mm

• Packaged Dimensions: 540 × 330 × 330 mm

• Additional: Supplied in pairs, includes large support saddle with rubber protection