Excellent assembly lubricant where elastomers and plastic materials move against metal.

Lubrication of plastic gears, mechanisms, O-rings, gaskets, valves and seals as well as surfaces that require good lubrication properties over extended periods without drying out

Seals electrical equipment against the ingress of moisture, and protects metal parts against corrosion

Acts as a release agent in the rubber & plastics industries

Apply by hand or grease gun

Consistency – NLGI grade: 2

Worked Penetration, 25°C , 1/10mm: 275

Colour: White translucent

Thickener: Silica

Drop Point, °C: No Drop Point

Evaporation Loss 30hrs @ 200°C ,%: 2.0

Cold Temperature Stability (-50oC): Conforms

Dynamic Rust Test :<1

Copper Corrosion – 24hr/100°C: Pass

Oil Separation 30h @ 200°C ,%: 4.0

Water Wash Out @ 93°C ,%: 1

Timken OK Load, kg: 1

Oxidation Resistance, D942,%>: 1

Dielectric strength, kV/mm: 15

Working Temperature, °C: -40 °C to 200 °C

• Material: rhyton and stainless steel rod,
• PTFE seal component
• Application: same as T29400, plus strong acid, strong alkaline solutions nitric acid etc.
• 3.5 litre / 10 pumps

STIHL WP 600 Petrol Water Pump – 3"

The STIHL WP 600 Petrol Water Pump is a high-capacity pump designed for efficient water transfer in agriculture, construction, irrigation, and general water management applications. Powered by a durable STIHL EHC 4-stroke petrol engine, this pump delivers impressive performance with a maximum flow capacity of 63 m³/h (1050 l/min). Its robust protective frame ensures stability on uneven surfaces while safeguarding the engine from impact and damage. With integrated vibration dampening and automatic low-oil protection, the WP 600 offers reliable, smooth operation even under demanding working conditions.

Features & Benefits

• Powerful 4-Stroke Petrol Engine – Reliable STIHL EHC engine delivers strong and consistent pumping performance.

• High Flow Capacity – Pumps up to 63 m³/h (1050 l/min) for efficient water movement.

• 3" Hose Connections – Ideal for high-volume water transfer and irrigation applications.

• Robust Protective Frame – Provides stability on various surfaces and protects the engine from damage.

• Automatic Low-Oil Shut-Off – Prevents engine damage by automatically switching off when oil levels are low.

• Integrated Suction Basket – Helps protect the pump from dirt and debris in the water.

• Vibration Dampening System – Reduces mechanical stress and ensures smooth operation at high engine speeds.

• Easy Starting & Reliable Operation – Built for dependable use in demanding environments.

• Suction and pressure hoses are not included in delivery.

• Not suitable for pumping salt water, petrol, oil, solvents, acids, food products, or water above 40°C.

• Engine Type: STIHL EHC 4-Stroke Petrol Engine

• Displacement: 212 cm³

• Rated Power: 5.2 kW

• Rated Speed: 3600 r/min

• Tank Capacity: 3.6 L

• Maximum Flow Capacity: 63 m³/h

• Maximum Flow Rate: 1050 L/min

• Maximum Pressure: 31 m

• Maximum Delivery Pressure: 3 bar

• Maximum Suction Lift: 7 m

• Suction Hose Connection: 3"

• Pressure Hose Connection: 3"

• Device Weight (without fuel): 29 kg

• Dimensions (L × W × H): 54 × 44 × 45 cm

• Sound Pressure Level (LpA): 87 dB(A)

• Guaranteed Sound Power Level (LWA): 103 dB(A)

These models are portable inverter DC arc welders.

The robust format makes them versatile and effective for a variety of uses.

The welder complies too current regulations and the optimum quality of materials used will ensure a long life with complete safety.

Supplied with:

Electrode holder with cable & dinse connector

Earth clamp with cable & dinse connector

Hand held face mask

Wire brush & chipping hammer

Main Voltage: 220V

Electrode Sizes: 2.0 – 3.2mm

Duty Cylce: 60%

Weight: 4.7Kg

Protection Class: IP21S