Seamlessly extend your hose length by joining two 12mm hoses together. Used by clicking into 12mm water stops or hose connectors.

• UV stabilised materials
• Standard 12mm hose fitting

Seamlessly joins your hose to two other 12mm hoses. Used by clicking into 12mm water stops or hose connectors.

• UV stabilised materials
• Standard 12mm hose fitting

Use

Well suited for battery sizes up to approximately 500Ah. It can maintenance charge batteries indefinitely and handle parallel consumption up to 30A while charging. The charging voltage is temperature compensated with an external sensor.

14,7 V

Some batteries require a higher charging voltage than others (this is described son the battery). Press the 14.7V button, and the initial charging voltage will be 0.3V above than the standard level.

Power supply mode

When you need continuous current and stable voltage during ECU programming or battery replacement, you can use our workshop chargers as a power supply. Activate Powersupply-mode by holding the “ON” button until the display begins to light up in sequence.

• Simple and user-friendly interface and display.
• Automatically adapts charging to your battery.
• Built-in Power supply mode.
• Battery status monitoring in the display.
• Secured against short-circuiting and reverse polarity.
• Integrated cable storage solution.
• Will not overcharge your battery.
• Temperature-compensated charging.

• Simple and user-friendly interface and display.
• Automatically adapts charging to your battery.
• Built-in Power supply mode.
• Monitor battery status in the display.
• Secured against short-circuiting and reverse polarity.
• Store the cable on the integrated solution.
• Will not overcharge your battery.
• The charging cycle is temperature compensated.

Functions

• Backlit user friendly interface and display.
• Adapts automatically to the size of your battery.
• A meter to easily read the actual power level of your battery.
• Integrated cable management.
• It will never over-charge your battery.
• Temperature compensated charging cycle.

• Simple and user-friendly interface and display
• Automatically adapts charging to your battery
• Built-in Power supply mode
• Battery status monitoring in the display
• Secured against short-circuiting and reverse polarity
• Integrated cable storage solution
• Will not overcharge your battery
• Temperature compensated charging

Make charging easier with a permanently mounted charging cable with a battery status indicator.

Monitor and charge your battery with ease with this SmartCharge accessory. The charging cable with ring terminals is permanently mounted on your battery, saving you from having to access it every time you need to charge. Place the plug with the status indicator where you can see it to monitor it. When you need to charge, flip open the indicator, and connect your SmartCharge.

S-207-8 Easy Mount and Demount Kit – The Fastest Way to Change Tubeless Truck Tyres

The S-207-8 Easy Mount and Demount Kit is the industry standard for changing tubeless truck tyres from 17.5” to 24.5” – including all wide-base and super singles. This manual solution uses simple leverage principles to mount and demount tyres efficiently, safely, and without bead damage. No machines required – just pure performance and ease of use in every tool.

Features

• Beaver tail bar – Removes second bead on larger tyres (above 315/80R22.5)

• Lever bar – Mounts and demounts all tubeless tyres (17.5"–24.5")

• Bead keeper – Holds the tyre bead in place without chasing it around the wheel

• Clevis – Protects tyre beads while speeding up the demounting process

• Bead breaker chisel/wedge – Assists in safely breaking the bead

• Fitting plate – Simplifies mounting and stripping of tyres

• Carry case – Keeps all tools organized and portable

Tyre compatibility: 17.5" to 24.5", including wide-base and super singles
Application: Mounting and demounting tubeless truck tyres
Includes: Full tool set with carry case
Origin: Industry standard, commercial-grade quality